• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.121-143
• /
• 2010

To investigate the effect of implant types and bone resorption on the fracture characteristics. 4 types of Osstem$^{(R)}$Implant were chosen and classified into external parallel, internal parallel, external taper, internal taper groups. Finite elements analysis was conducted with ANSYS Multi Physics software. Fatigue fracture test was performed by connecting the mold to the dynamic load fatigue testing machine with maximum load of 600N and minimum load of 60N. The entire fatigue test was performed with frequency of 14Hz and fractured specimens were observed with Hitachi S-3000 H scanning electron microscope. The results were as follows: 1. In the fatigue test of 2 mm exposed implants group, Tapered type and external connected type had higher fatigue life. 2. In the fatigue test of 4 mm exposed implants group, Parallel type and external connected types had higher fatigue life. 3. The fracture patterns of all 4 mm exposed implant system appeared transversely near the dead space of the fixture. With a exposing level of 2 mm, all internally connected implant systems were fractured transversely at the platform of fixture facing the abutment. but externally connected ones were fractured at the fillet of abutment body and hexa of fixture or near the dead space of the fixture. 4. Many fatigue striations were observed near the crack initiation and propagation sites. The cleavage with facet or dimple fractures appeared at the final fracture sites. 5. Effective stress of buccal site with compressive stress is higher than that of lingual site with tensile stress, and effective stress acting on the fixture is higher than that of the abutment screw. Also, maximum effective stress acting on the parallel type fixtures is higher. It is careful to use the internal type implant system in posterior area.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.83-94
• /
• 2009

The aim of this study was to investigate the shear bond strength between zirconia ceramic and resin cement according to various surface treatments. The surface of each zirconia ceramic was subjected to one of the following treatments and then bonded Rely X Unicem or Rely X ARC resin cement; (1) Rocatec system and $50{\mu}m$ surface polishing, (2) No treatment and $50{\mu}m$ surface polishing, (3) Rocatec system and $1{\mu}m$ surface polishing, (4) No treatment and $1{\mu}m$ surface polishing. Each of eight bonding group was tested in shear bond strengths by universal testing machine(Z020, Zwick, Ulm, Germany) with crosshead speed of 1mm/min. The results were as follows; 1. Rocatec treatment groups showed greater bonding strengths than No Rocatec groups. There was significant difference of among groups(P<0.001) 2. For Rocatec groups, $50{\mu}m$ surface roughness groups showed greater bonding strengths than $1{\mu}m$ surface roughness groups.(P<0.001) But for No Rocatec groups, There was no significant difference of among groups(P>0.05) 3. Rely X Unicem groups showed greater bonding strengths than Rely X ARC groups. There was significant difference of among groups(P<0.01) Within the conditions of this study, Rocatec treatment was an effective way of increasing zirconia bonds to a resin cement, even in the case of self-adhesive resin cement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2009

The composite resin, due to its esthetic quality, is considered the material of choice for restoration of anterior teeth. To get a satisfactory result in the composite resin restorations, it is necessary to choose right shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guides or shade guides that are provided by their company, but color differences among them might be expected even using the same shade in various materials. This study is to measure color differences between various light-cured composite resins and shade guides and to provide the clinicians with information which may aid in improved color match of esthetic restoration. Four kinds of light-cured composite resins (Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), Esthet X (E X)) and shade guides with A2 and A3 shade were used. Three specimens of each material and one specimen of each shade guide were made. Each composite resin was filled into the Teflon mold (1.35 mm depth, 8 mm diameter), followed by compression, polymerization and polishing with wet sandpaper. Shade guides were grinded with polishing stones and rubber points to a thickness of approximately 1.35 mm. Color characteristics were performed with a spectrophotometer(color i5, GretagMacbeth, USA). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E^*ab$) between composite resins and shade guides. CIE standard D65 was used as the light source. The results were as follows : 1. Among the $L^*$, $a^*$, $b^*$ values of most of 4 kinds of composite resin specimens which are produced by same shade, there were significant differences(p<0.05). 2. Among all 4 kinds of composite resin specimens which are produced by same shade, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 3. Between most of composite resin specimens investigated and their corresponding shade guides, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 4. In the clinical environment, it is recommended that custom shade guides be made from resin material itself for better color matching. Shade guides supplied by manufacturers or Vita Lumin shade guide may not provide clinicians a accurate standard in matching color of composite resins, and there are perceptible color differences in most of products. Therefore, it is recommended that custom shade guides be made from resin material itself and used for better color matching.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.125-137
• /
• 2009

There are many reports that these implant surface treatments may affect to cellular reaction in the surface of implant. This study was done by installing the 8 type implant with the variable surface treatment, used or developed, in the mandible of the mature dog to evaluate how the method of surface treatment of the implant can affect to the bone healing by analyzing histologically and histomorphometrically and find out bone healing appearance periodically after installing implant. By using the 8 type implants which have the different surface treatment, 72 implants were installed on the mandible of 9 mature dogs, and 3 dogs were sacrificed on every 2, 4, 8 weeks. After making bone fragment by cutting and managing, we analyzed histologically, then compared with BIC(Bone to implant contact) for the histomorphometrical analysis. In the result of histological analysis, there was large amount of bone formation in good state on the adjacent area of implant in the 2 weeks testing group. At 4 weeks, although there was general bone formation, the new bone was separated with the basal bone. At 8 weeks, the new bone became matured and connected tightly to the basal bone. There was no difference in the each surface of 8 implants. In the result of histomorphometrical analysis, 2 weeks group had considerably lower value than 4 and 8 weeks group, and there was no difference between 4 and 8 weeks group. There was no difference in the each surface treatment of implants.

• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.696-702
• /
• 2007

The effect of different steamed garlic powder concentrations on sponge cake quality were investigated by analyzing both physicochemical and sensory properties. The sponge cakes were mixed with either steamed and freeze-dried garlic powders at different ratio [0, 2, 4, 6, 8 and 10 % (w/flow w)]. The density of the prepared dough increased with increasing amounts of steamed garlic powder when the concentrations were over 4%. The heights of the sponge cakes ranged from $3.53{\pm}0.12{\sim}3.60{\pm}0.15cm$ in the $4{\sim}8%$ steamed garlic powder samples, and were significantly higher than the control. The specific loaf volume of the cake was $3.86{\pm}0.07mL/g$ the highest in the 4% steamed garlic powder samples. When the garlic powder concentration was over the 6%, the specific loaf volumes of the sponge cakes decreased with increases in garlic powder contents. The measured L- and b-values of the crust were significantly decreased with increasing garlic powder concentration while the a-value gradually increased. The L-value of the crumb increased with increasing steamed garlic powder concentration, especially at concentrations greater than 4%. The a-values were higher in the steamed garlic powder treatments than in the control. however, no significant differences were found in the concentrations over 4%. The hardness of the control was $812.42{\pm}56.69g/cm^2$, whereas it ranged from $1005.36{\pm}43.65{\sim}1522.78{\pm}204.95g/cm^2$ in the experimental groups. Hardness increased with increasing garlic powder concentration. When considering moistness, overall acceptability, and other characteristics, the optimal concentration of steamed garlic powder was found to be 4%.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.1
• /
• pp.1-11
• /
• 1998

Constitution means to combine the function into the body. It also includes the genetic factor and the environmental factor. Sasang Constitutional Medicine has the organized and unique ideas of the theory and the practice. So it is widly used in korea. But It has a problem to be popular. That's the objectification of Sasang constitution. There are so many studies to classify Sasang constitution analytic and objectively. I try to classify the studies to identify Sasang constitution objectively and check the problems. 1. The morphologic studies of Sasang Constitution are dividied into the figure and the face-speech through the morphologics and the phonetics. We need to standardize and make a simple method through computer software. 2. The study of the mind is used by the questionnaire about the telent, the character, and the greed each constitution. Recently QSCC II computer software is made and is used at many clinics in Korea. We need to recheck children and Taeyangin. 3. The symptom and the disease are subjective. So the study of them is usually used by some diagnostic equipments. But these have to be revaluated on the view of Oriental Medicine and Sasang Constitutional Medicine and try to study the objectification of Sasang constitution. And then we must try to objectify Sasang constitutional disease. 4. Disease and symptoms have to be studied much more about the mechanism and the relation. The study of medicine was done the way of the homeopathy using EAV. But that had some problems. So it should depend on the new science.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.225-231
• /
• 2008

The purpose of this study was to examine the relationship between oral health habits and oral diseases in an attempt to raise awareness of the need for prolonged dental checkup projects and lay the foundation for oral health education and sustained oral health care projects. The subjects in this study were 2,643 workers from 76 workplaces in Siwha Industrial Complex in the city of Ansan, Gyeonggi province, who were at the age of 20 and up. The findings of the study were as follows: 1. Concerning the experience of visiting a dental clinic over the past year, 760 male workers (37.4%) and 237 females (38.9%) visited dental clinics in the past year. By age group, those who were in their 50s (54.0%) visited dental clinics the most, and the workers in their 30s (67.9%) paid a visit the least. The gap between the age groups was statistically significant (p < 0.001). 2. In regard to the time for toothbrushing by age group, the workers in their 20s (64.6%) made up the largest group that brushed their teeth before breakfast, and those who were in their 60s and up constituted the greatest group that did toothbrushing after breakfast. The workers in their 20s brushed their teeth the least, as the rates of the workers of this age group who did toothbrushing after breakfast and dinner respectively stood at 64.0 percent and 54.5 percent. The disparities between the age groups were statistically significant (p < 0.001). 3. As for scaling experience for the past year, 302(46.0%) out of the workers who got their teeth scaled in the past year had periodontal diseases, and 1,600(80.6%) out of those who didn't suffered from periodontal diseases. The gap between them was statistically significant (p < 0.001). 4. Regarding the relationship of subjective oral health state to dental caries among the workers without dental caries, the largest group that numbered 327(54.1%) considered themselves to be in good oral health. In the event of the workers with dental caries, the greatest group that numbered 708(75.5%) found themselves to have one or more carious tooth(teeth). The disparity between them was statistically significant (p < 0.001). 5. As for connections between dietary habits and dental caries, those who had dental caries (2.29) showed a greater preference for snack than the others who hadn't (2.21). The preference for snack made a bigger statistically significant difference to dental caries than the other dietary habits (p < 0.05).

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.233-239
• /
• 2008

The purpose of this study was to survey the knowledge and awareness of dental hygienists and dental hygiene students about hepatitis B in an attempt to lay the solid foundation for the prevention of hepatitis B and infection control, as dental hygienists were highly likely to be exposed to HBV during job performance. The findings of the study were as follows: 1. 32.5% of the dental hygienists and 15.6% of the dental hygiene students were aware of their own HBsAg and HBsAb states. The dental hygienists who were cognizant of the states statistically significantly outnumbered the dental hygiene students who were (p=.000). 2. As for vaccination against hepatitis B, 71.8% of the dental hygienists and 47.3 % of the dental hygiene students were inoculated against it. The dental hygienists who were vaccinated against it outnumbered the dental hygiene students who were, and the disparity between the two was statistically significant (p=.000). 3. In the event of those who were vaccinated against hepatitis B, the dental hygienists were better cognizant than the dental hygiene students of the right time for the vaccination, required vaccination frequency (three times) and confirmation of the formation of hepatitis B antibody (p=.000). 4. Regarding awareness of hepatitis B infection route, the dental hygienists knew significantly better than the dental hygiene students that hepatitis B might be infected via blood (p=.030), sexual relations (p=.000), contaminated needle sticks (p=.000), mothers with hepatitis B positive during delivery (p=.000), toothbrushes/razors (p=.000) and exchange of drinking cups (p=.000). 5. As to the relationship between health status and knowledge on hepatitis B infection route, the respondents who were in bad shape had the best knowledge about that, followed by those in an average state of health and healthy respondents. And the dental hygienists had a significantly better knowledge than the dental hygiene students (p=.001). 6. Just a small number of the dental hygienists and students knew about the hepatitis B-related past experiences of their families, and the gap between the two was insignificant.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.275-281
• /
• 2008

Background: This research aims to provide basic data for dental hygienists to implement the infection control after understanding the level of their implementation of infection control in case they have been trained of infection control or not. Method: The respondents in this research are the dental hygienists who worked in the Incheon or Gyeonggi areas between June 16 and July 5, 2008 and who attended complementary training conducted by the Seoul Branch of Korean Dental Hygienists Association in April 2008. A total of 191 questionnaires were distributed to them, and the frequency of the collected data was analyzed using SPSS WIN 12.0. Moreover, cross-tabulation analysis (${\chi}^2$) whose significance level was 0.05, was applied to the data in order to verify the statistical significance of the survey method. Result: There was significant difference in their practice to wear gloves and/or a mask, use a disposable apron and the time to change the apron depending upon the respondents' workplace. There was significant difference in the time to change their apron depending upon the respondents' time of service. 91.6% had been trained in the infection control: of them, 70.7% trained at their school. It was found that 68.6% of the respondents who had been trained in the infection control would wash their hands before treating a patient. 50.3% of the respondents who had been trained in the prevention of contamination would wear their gloves as needed for a basic treatment. Conclusion: Considering the above results of this research, it is concluded that it is necessary to provide practicing dental hygienists with many opportunities for systematic and practical training so that they may faithfully follow the guidelines for the prevention of contamination and to encourage hospitals to have a greater store of relevant facilities, equipment and supplies.