• Journal of Korean Library and Information Science Society
• /
• v.48 no.2
• /
• pp.159-186
• /
• 2017

This study is to analyze teacher librarians' awareness about the performance-based pay system, their job satisfaction and the relationship between the two in an attempt to help make the pay system serve as catalyst in creating a positive competitive climate in the teacher community and boosting the qualifications of teacher librarian. As a result, the teacher librarians' grades were 4.1% in S, 27.5% in A, 62.5% in B, and 5.9% in the exception of incentive. The teacher librarians' awareness of the performance-based pay system level was only 2.15 point out of 7, and their job satisfaction level was 4.60 out of 7. The teacher librarians' were more satisfied with performance-based pay, participation, fairness of evaluation criteria, fairness of evaluation process and results. In conclusion, higher awareness of the teacher librarians' performance incentives showed higher job satisfaction. And we might be able to suggest the improvement plan for teacher librarian evaluation in teacher performance system.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.25-34
• /
• 1999

This geochemical study was carried out to find out the distribution of metals and cyanide in the soils around the Keum-Jung abandoned mine. Chemical analysis showed that extractable As contents in the soils near the mine exceeded 15mg/kg, Korean standard of soil contamination for farm land. The Results suggests that As contamination is due to input of tailings in the soils. According to total decomposition of tailings, As was highly concentrated in tailings. The water in a tailings impoundment was changed to acidic and contaminated by metals and sulfate which were released through oxidation of impoundment. Acid mine drainage from the tailings impoundment distribution channels directed to the paddy soils. The proper measures are required to prevent contamination of the soil and water in the vicinity of the Keum-Jung mine.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.240.2-240.2
• /
• 2011

그라파이트 산화물(graphite oxide;G.O)는 그라파이트와는 다르게 물에서의 분산 능력이 뛰어나고 다양한 기판상에 단일 G.O layer를 형성할 수 있는 특성을 가지고 있으며, 유연(flexible)하고 투명(transparent)하기 때문에 다양한 전 자기 디바이스에 적용 가능하다. 특히, 최근 자성산화물 나노입자(magnetic oxide nanoparticles)에 대한 연구가 집중되고 있는데, 이러한 자성 나노입자와 G.O와의 복합체에 대한 연구는 다양한 분야로의 적용성에 대한 새로운 길을 열어주고 있다. 본 연구에서는 화학적 처리법을 적용하여 자성 나노입자(Co 나노입자)와 G.O 복합체를 제조하였다. Natural Graphite powder (N.G)에 $H_2O_4$ (98%) 및 $(NH_4)_2SO_4$를 적정 몰비로 첨가하여 반응 시킨 후 공기 중에서 열처리 공정을 수행하여 expanded graphite (E.G)를 제조 하였다. 열처리된 E.G를 $1,050^{\circ}C$ 온도에서 15~30초 및 30~60초 동안 공기 중에서 열처리 하여 expanded graphite oxide (E.G.O)를 제조하였으며, E.G.O와 $Co(acac)_3$의 화학적 반응을 통하여 Co 자성나노입자-G.O 복합체를 제조하였다. N.G, E.G, E.G.O 및 E.G.O+Co입자의 결정구조 분석을 위하여 XRD 측정을 수행하였으며, FTIR을 이용하여 각 단계에서의 반응성에 대한 연구를 수행하였다. 각 단계에서 표면 및 내부 미세구조 특성 분석을 위하여 SEM, TEM, 및 EDX 분석을 수행하였으며, E.G.O+Co 복합체의 자기적 특성 평가를 위하여VSM (vibrating sample magnetometer) 측정을 수행하였다. 이러한 연구 결과는 향후 자성나노입자와 그라핀과의 복합화를 위한 기저 기술로 활용가능하리라 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.109-117
• /
• 2001

This research was carried out to develop the Hanji(Korean paper) sludge wood particle composite utilizing the waste sludges occurring from the making process of Hanji(Korean paper). In the research, four mixing ratios of white or black sludge to wood particle(10:90, 20:80, 30:70, and 40:60), three types of the resin adhesives(PMDI, urea and phenol resin) and three levels of the densities(0.60, 0.75 and 0.90) were designed to investigate the physical properties of Hanji(Korean paper) sludge wood particle composite. The linear expansion of Hanji(Korean paper) sludge wood particle composite was not always increased, compared to control boards. For thickness swelling, PMDI-bonded composites had the lowest value, and thickness swelling of composite was generally decreased with the increase of Hanji sludge. The water absorption of white sludge wood particle composite had no tendency, hut that of black sludge wood particle composite was decreased with an increase of mixing ratio of Hanji sludge.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.153-157
• /
• 2011

We have investigated the effect of inductively coupled plasma (ICP) treatment on the early growth stage of heteroepitaxial Ge layers grown on Si(100) substrates using low pressure chemical vapor deposition (LPCVD), The Si(100) substrates were treated by ICP process with various source and bias powers, followed by the Ge deposition, The ICP treatment led to the enhancement in the coalescence of Ge islands, The growth rate of Ge on Si(100) with ICP surface treatment is about 5 times higher than that without ICP surface treatment. A missing dimer caused by the ICP surface treatment can act as a nucleation site for Ge adatoms, which could be responsible for the improvement in growth behavior of Ge on Si(100) substrates.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.49-58
• /
• 2014

A low-swing differential near-ground signaling (NGS) transceiver for low-power high-speed mobile I/O interface is presented. The proposed transmitter adopts an on-chip regulated programmable-swing voltage-mode driver and a pre-driver with asymmetric rising/falling time. The proposed receiver utilizes a new multiple gain-path differential amplifier with feed-forward capacitors that boost high-frequency gain. Also, the receiver incorporates a new adaptive bias generator to compensate the input common-mode variation due to the variable output swing of the transmitter and to minimize the current mismatch of the receiver's input stage amplifier. The use of the new simple and effective impedance matching techniques applied in the transmitter and receiver results in good signal integrity and high power efficiency. The proposed transceiver designed in a 65-nm CMOS technology achieves a data rate of 13 Gbps/channel and 0.3 pJ/bit (= 0.3 mW/Gbps) high power efficiency over a 10 cm FR4 printed circuit board.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.152-159
• /
• 2004

In this study, we design the one-chip PWM IC with high voltage power switch (300V class LDMOSFET) for SMPS (Switching Mode Power Supply) application. Reference circuits generate constant voltage(5V) in the various of power supply and temperature condition. Error amp. is designed with large DC gain $({\simeq}65dB)$, unity frequency $({\simeq}190kHz)$ and large $PM(75^{\circ})$. comparator is designed with 2 stage. Saw tooth generators operate with 20kHz oscillation frequency. Also, we optimize drift concentration & drift length of n-LDMOSFET for design of high voltage switching device. It is shown that simulation results have the breakdown voltage of 350V. (using ISE-TCAD Simulation tool). PWM IC with power switching device is designed with 2um design rule and Bi-DMOS technology.

• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.54-60
• /
• 2007

In this study novel ESD protection device, namely, N/P-type Low Voltage Triggered SCR, has been proposed, for high speed I/O interface. Proposed device could lower high trigger voltage($\sim$20V) of conventional SCR and reduce latch-up phenomenon of protection device during the normal condition. In this Study, the proposed NPLVTSCR has been simulated using TMA MEDICI device simulator for electrical characteristic. Also the proposed device's test pattern was fabricated using 90nm TSMC's CMOS process and was measured electrical characteristic and robustness. In the result, NPLVTSCR has 3.2V $\sim$ 7.5V trigger voltage and 2.3V $\sim$ 3.2V holding voltage by changing PMOS gate length and it has about 2kV, 7.5A HBM ESD robustness(IEC61000-4-2).

• Transactions of Materials Processing
• /
• v.23 no.8
• /
• pp.501-506
• /
• 2014

Progressive shearing with blanking dies is commonly employed to produce large quantities of tiny sheet metal electronic parts. Sheet metal pins, which are narrow and long, that are sheared with a progressive die set are often twisted. The twist in the sheet metal pins, which usually occurs in the final shearing operation, generally decreases with increasing blank holding force. The blank holding forces in all shearing operations are not the same because of different shearing positions and areas. In the current study, the optimal layout of the springs in a progressive die set to minimize the twist of the sheet metal pin is proposed. In order to find the holding force acting on the tiny narrow blanks produced with the proposed springs during the shearing process, the equivalent area method is used in the structural analysis. The shearing of the sheet-metal pin was simulated to compute the twist angle associated with the blank holding force. The constraint condition satisfying the pre-set blank holding force from the previous shearing operations was imposed. A design of experiments (DOE) was numerically implemented by analyzing the progressive die structure and by simulating the shearing process. From the meta-model created from the experimental results and by using a quadratic response surface method (PQRSM), the optimal layout of the springs was determined. The twist of sheet metal pin associated with the optimal layout of the springs found in the current study was compared with that of an existing progressive die to obtain a minimal amount of twist.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.248-257
• /
• 2008

Coal liquefaction technology was established in Germany in 1920s. Coal liquefaction refers to the process in which coal is converted into liquid fuels such as gasoline and diesel oil under certain conditions. Coal liquefaction is usually classified into direct coal liquefaction (DCL) and indirect coal liquefaction (ICL). Various technologies for coal liquefaction, conducted between 1970s and 2000s, resulted in the development and optimization of a communication ready technology for the production of petroleum substitutes as refinery feedstocks. The purpose of this paper is to review the research, development and demonstration of coal liquefaction. In these respects, various DCL and ICL processes under development were illustrated and compared. Also, the status and perspective of coal liquefaction projects in the world were viewed. Considering the scale, and technical difficulties of domestic coal liquefaction, the project has be leaded by the government.