• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.85-91
• /
• 2002

일반적으로 시스템의 해석에 직교 함수를 이용하는 경우에는 크로네커 곱(Kronecker product)에 의하여 고차 행렬에 대한 역변환이 필요하게 되며, 이로 인하여 많은 연산 시간이 필요하게 된다. 본 연구에서는 이 문제점을 해결하고자 고속 월쉬 변환을 이용하는 방법을 제시하였고, 이렇게 함으로써 크로네커 곱에 의한 다루기 힘든 고차 행렬이나 그에 따르는 행렬들의 계산을 필요없게 함으로써 연산의 부담을 줄일 수 있게 된다. 본 연구에서는 쌍일차계의 해석을 위한 직교 함수의 유한 급수 전개 방법과 고속 월쉬 변환 방법을 비교하여 봄으로써 본 연구에서 제안한 방법의 우수성을 표현하였으며, 시뮬레이션을 통하여 고속 월쉬 변환에 와한 쌍일차계 상태 해석 결과를 표시하였다.

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.73-81
• /
• 2001

분포정수계는 시스템이 두 개 이상의 독립변수로 표현되면서 또한 각 변수에 대한 미분을 포함하는 편미분 방정식으로 표현되므로, 분포정수계에 직접적인 최적제어 논리를 도입하는 것은 매우 어렵다. 본 연구에서 제시하고자하는 새로운 알고리즘은 월쉬 함수 고유특성을 그대로 유지할 수 있는 유한급수전개방법을 이용함과 동시에 계산의 편리성을 위하여 고속 월쉬 변환을 사용하는 것으로서, 본 연구 방법을 사용하면 역행렬 연산이 필요 없게 되므로 기존의 방법에 의해 처리하기 힘든 분포정수계, 선형시변계, 비선형계의 해석 및 제어문제어도 쉽게 적용할 수 있다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.415-422
• /
• 2000

This paper presents a new algorithm for hierarchical optimal control of nonlinear systems. The proposed method is simple because the solutions are obtained by only exchanging informations of coefficient vector based on interaction prediction principle and FWT(fast Walsh transform) in upper and lower level. Since we solve two point boundary problem with Picard's iterative method and the backward integral operational matrix of Walsh function to obtain the optimal vector of each independent subsystem, the algorithm is simple and its operation is fast without inverse matrix and kronecker product operation. In simulation, the proposed algorithm's usefulness is proved by comparison with the global optimal control methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2611-2613
• /
• 2000

This paper deals with a novel approach to unknown inputs observer(UIO) design for linear time-invariant dynamical systems using a fast Walsh transform and Walsh function's differential operation. Generally, UIO has a derivation of system outputs which is not available from the measurement directly. And it is an obstacle to estimate the unknown inputs properly when unexpected measurement noises are presented. Therefore, this paper propose an algebraic approach to eliminate such problems by using a Walsh function's differential operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.141-145
• /
• 2007

Using the New Fast Walsh Transform algorithm, we present a new algorithm which reduces the computational amount, and it can consequently calculate the real and imaginary components for current and voltage signals of power system in sampling intervals. The calculation amount is reduced to 2X(m-1) at m samples to measure full harmonics using developed algorithm. When in single harmonic measuring, it needs only 2(log2N-1)+1 additions and subtractions. We developed hardware device for testing, and tested the developed algorithm by measuring real and imaginary components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.850-852
• /
• 1999

This paper presents a new algorithm of three-level optimal control for non-linear large scale systems using fast walsh transform. Since the solution is obtained through the information exchange of coefficient vectors induced walsh transform of all levels, this algorithm is quick and convenient. The validity of the proposed method is checked in the simulation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권6호
• /
• pp.272-282
• /
• 2001

This paper developed improved fast Walsh transform based on dyadic-ordered fast Walsh transform, then regenerated signal flow graph of improved fast Walsh transform, and used it for digital filtering, and then measured fundamental frequency and harmonics for current and voltage signals of power system. Using the improved fast Walsh transform, we present a new algorithm which reduces the computational amount, and it can consequently calculate the real and imaginary components for current and voltage signals of power system in sampling intervals. The calculation amount is reduced to 2(N-1) at N samples to measure full harmonics using developed algorithm. When, in single harmonic measuring, it needs only 2(log2N-1) additions and subtractions.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권11호
• /
• pp.505-513
• /
• 2001

This paper presents the new three-level optimal control scheme for the large scale nonlinear systems, which is based on fast walsh transform. It is well known that optimization for nonlinear systems leads to the resolution of a nonlinear two point boundary value problem which always requires a numerical iterative technique for their solution. However, Three-level costate coordination can avoid two point boundary condition in subsystem. But this method also has the defect that must solve high order differential equation in intermediate level. The proposed method makes use of fast walsh transform, therefore, is simple in computation because of solving algebra equation instead of differential equation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2620-2623
• /
• 2000

The standard approach consists of using correlation of orthogonal functions in digital filtering, such as well-known FFT(Fast Fourier Transform) and FWT(Fast Walsh Transform). But it needs much calculations, multiplications and additions. The calculation amount is m $log_2m$ in the general case. Therefore, this requires high speed processors to calculate in real time, which can calculate floating point. This study developed improved fast Walsh transform based on dyadic-ordered fast Walsh transform, then regenerated signal flow graph of improved fast Walsh transform, and used it for digital filtering, and then measured fundamental frequency and harmonics for current and voltage signals of power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2614-2616
• /
• 2000

This paper presents the Walsh-Fourier conversion algorithm and Signal Analysis Technique. The Fourier coefficients are determined as the combinations of the Walsh coefficients in terms of the new Walsh-Fourier conversion algorithm. This paper checks the analysis of the Walsh-Fourier spectra and the approximate synthesis of the waveform via one example.