• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.31-41
• /
• 2019

Volatile organic compounds(VOCs) are toxic carcinogenic compounds found in wastewater. VOCs require rapid removal because they are easily volatilized during wastewater treatment. Electrochemical advanced oxidation processes(EAOPs) are considered efficient for VOC removal, based on their fast and versatile anodic electrochemical oxidation of pollutants. Many studies have reported the efficiency of removal of various types of pollutants using different anodes, but few studies have examined volatilization of VOCs during EAOPs. This study examined the removal efficiency for VOCs (chloroform, benzene, trichloroethylene and toluene) by oxidization and volatilization under a static stirred, aerated condition and an EAOP to compare the volatility of each compound. The removal efficiency of the optimum anode was determined by comparing the smallest volatilization ratio and the largest oxidization ratio for four different dimensionally stable anodes(DSA): Pt/Ti, $IrO_2/Ti$, $IrO_2/Ti$, and $IrO_2-Ru-Pd/Ti$. EAOP was operated under same current density ($25mA/cm^2$) and electrolyte concentration (0.05 M, as NaCl). The high volatility of the VOCs resulted in removal of more than 90% within 30 min under aerated conditions. For EAOP, the $IrO_2-Ru/Ti$ anode exhibited the highest VOC removal efficiency, at over 98% in 1 h, and the lowest VOC volatilization (less than 5%). Chloroform was the most recalcitrant VOC due to its high volatility and chemical stability, but it was oxidized 99.2% by $IrO_2-Ru/Ti$, 90.2% by $IrO_2-Ru-Pd/Ti$, 78% by $IrO_2/Ti$, and 75.4% by Pt/Ti anodes The oxidation and volatilization ratios of the VOCs indicate that the $IrO_2-Ru/Ti$ anode has superior electrochemical properties for VOC treatment due to its rapid oxidation process and its prevention of bubbling and volatilization of VOCs.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.58-61
• /
• 2006

The object of this study was to develop an advanced method for fluid flow and oxygen transmission and increase adhesive property of microorganism to waste plastic vessel that was made of microorganism media. Through lab scale experiments, we found the optimum packed media volume rate and method, and when the optimum condition was applied to pilot plant, we confirmed possibility of advanced treatment. The sewage that was used in the test was the sewage disposal facility established in C and K elementary schools, which utilized waste plastic media oxidation engineering method. Analysis showed that removal efficiency of organic matter, SS, T-N and T-P was very high, that the sewage disposal facility maintained stability of treatment when changeable load of raw sewage flowed in.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.167-177
• /
• 2014

New technologies for water purification are continuously emerging to address global water quality problems, and one such technology involves advanced hermetic water purification facilities made by concrete that utilize ozone treatment processes. Better knowledge about surface deterioration of epoxy coating exposed to ozone treatment is needed as a foundation for development of improved methods and materials in the future. This study utilized atomic force microscopy (AFM), nanoindentation methods, and existing indirect methods such as visual observation, changes in mass, surface observation and chrominance analysis, to evaluate epoxy water-resistance and anti-corrosiveness. This study considered six different epoxy formulations to assess typical degradation characteristics of epoxy surfaces with regard to water-resistance/anti-corrosiveness. AFM and nanoindentation techniques emerged as promising direct methods with potential to provide quantitative measures of surface quality that are improvements upon existing indirect methods. The experiments also confirmed that some of the epoxy-coatings were severely iMPacted by ozone exposure, and thus the results demonstrate that concern about such deterioration is justified.

• Journal of Food Hygiene and Safety
• /
• v.20 no.2
• /
• pp.89-97
• /
• 2005

The influence of different storage temperature and packaging methods on the flying cultured eel bone were investigated. The acid values, peroxide values and fatty acid composition were measured during storage 20$^{\circ}C\;and\;40^{\circ}C$ for 60 days. The lipid oxidation was rapidly progressed with the increased temperature. The addition of oxygen absorber remarkably repressed lipid oxidation during storage of the living cultured eel bone at $20^{\circ}C\;and\;40^{\circ}C$, followed by $N_{2},\;BHA,\;\alpha$-tocopherol and control. The monounsaturated fatty acid content was the highest in the frying cultured eel bone, followed by saturated fatty acid and polyunsaturated fatty acid. The major fatty acids were oleic acid, palmitic acid and linoleic acid. The saturated fatty acids increased with the rise of storage temperature and prolonging the storage period, while monounsaturated fatty acid and polyunsaturated fatty acid were decreased. The changes of fatty acid composition were the lowest in sample by packing with oxygen absorber, followed by packing $N_{2},\;BHA,\;\alpha$-tocopherol and control. from the result of sensory evaluation, sample by packing with oxygen absorber were rated as higher quality than the others.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.155-165
• /
• 1994

To evaluate the antioxidant effect of flavonoids and a-tocopherol on purified fish oil(up to $40\%$ of n-3 polyunsaturated fatty acids), lipid peroxidation, and fatty acids content during storage and upon heating were determined. The potential of these compounds for inhibiting and delaying both oxidation and lipoxygenase processes was also evaluated. The oxidation of fish oil was effectively inhibited by flavonoids and a-tocopherol. The antioxidizing effect of these compounds increased in proportion to their concentration. The addition of a-tocopherol and catechin-a-tocopherol mixture were prolonged induction period of lipid oxidation by 3.5 to 4 times. All other flavonoids also shown more than twice the prolonging effect. Lipoxygenase activity was decreased by catechin and a-tocopherol effectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.39-47
• /
• 2013

This study demonstrates the oxidative degradation of pharmaceutical compounds during ozonation of surface waters in Ulsan. Diclofenac, carbamazepine, bezafibrate, and ibuprofen were selected as surrogate pharmaceutical compounds, and ozonation experiments were performed using raw waters collected from the Sayeon Dam and the Hoeya Dam in Ulsan. Diclofenac and carbamazepine which have high reactivity with molecular ozone showed higher removal efficiencies than bezafibrate and ibuprofen during ozonation. The addition of tert-butanol, a hydroxyl radical scavenger, increased the removal efficiencies of diclofenac and carbamazepine by increasing the ozone exposure. However, the oxidation of bezafibrate and ibuprofen was inhibited by the presence of tert-butanol due to the suppression of the exposure to hydroxyl radical. The elimination of the selected pharmaceuticals could be successfully predicted by the kinetic model base on the $R_{ct}$ concept. Depending on the experimental condition, $R_{ct}$ values were determined to be $(1.54{\sim}3.32){\times}10^{-7}$ and $(1.19{\sim}3.04){\times}10^{-7}$ for the Sayeon Dam and the Hoeya Dam waters, respectively. Relatively high $R_{ct}$ values indicate that the conversion of $O_3$ into $^{\cdot}OH$ is more pronounced for surface waters in Ulsan compared to other water sources.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.349-355
• /
• 2018

This study interrogated multi-layer heterojunction anodes were interrogated for potential applications to water treatment. The multi-layer anodes with outer layers of $SnO_2/Bi_2O_3$ and/or $TiO_2/Bi_2O_3$ onto $IrO_2/Ta_2O_5$ electrodes were prepared by thermal decomposition and characterized in terms of reactive chlorine species (RCS) generation in 50 mM NaCl solutions. The $IrO_2/Ta_2O_5$ layer on Ti substrate (Anode 1) primarily served as an electron shuttle. The current efficiency (CE) and energy efficiency (EE) for RCS generation were significantly enhanced by the further coating of $SnO_2/Bi_2O_3$ (Anode 2) and $TiO_2/Bi_2O_3$ (Anode 3) layers onto the Anode 1, despite moderate losses in electrical conductivity and active surface area. The CE of the Anode 3 was found to show the highest RCS generation rate, whereas the multi-junction architecture (Anode 4, sequential coating of $IrO_2/Ta_2O_5$, $SnO_2/Bi_2O_3$, and $TiO_2/Bi_2O_3$) showed marginal improvement. The microscopic observations indicated that the outer $TiO_2/Bi_2O_3$ could form a crack-free layer by an incorporation of anatase $TiO_2$ particles, potentially increasing the service life of the anode. The results of this study are expected to broaden the usage of dimensionally stable anodes in water treatment with an enhanced RCS generation and lifetime.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.146-151
• /
• 1987

The storage stability of sardine oil and the effect of BHA on the oxidation of fatty acids especially, highly unsatureted fatty acids like EPA and DHA were investigated. The sardine oil was extracted from round sardine, with chloroform-methanol(2:1 v/v) solvent with/without addition of BHA, and then stored at $30^{\circ}C$. The deterioration of oil was examined periodically by measuring acid value(AV), peroxide value(POV), carbonyl value(COV), and oxygen absorption. The changes in fatty acid composition during the storage was determined by GLC analysis to elucidate the oxidative stability of individual fatty acid. Formation of free fatty acid increased rapidly according to the storage time elapsed in the BHA free oil while it was obviously inhibited in the BHA added oil. Peroxides and carbonyl compounds were formed very rapidly at the beginning of storage of BHA free oil. But in the oil extracted with BHA, formation of peroxides was somewhat inhibited and formation of carbonyl compounds was very strongly inhibited. Principal fatty acids of sardine oil were $C_{16:0},\;C_{16:1},\;C_{18:1},\;C_{20:5}\;and\;C_{22:6}$ acids, and $\omega_33$ polyunsaturated fatty acid $(\omega_3\;PUFA)$ content was very high as much as $23\%$ of the total fatty acid content. The oxidative degradation of fatty acids was enhanced at PUFA especially $C_{20:5}$ ana $C_{22:6}$ acid in BHA free oil. However, the oxidation was fairly retarded in the oil extracted with BHA and the both $C_{20:5}$ and $C_{22:6}$ acids remained at the end of a month storage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.3
• /
• pp.213-218
• /
• 1987

The DNA damage mechanism by fish oil peroxidation was investigated through the model system of a DNA-mackerel lipid at $37^{\circ}C$. Mackerel lipid peroxidation products induced a great DNA damage with the increment of its concentration, and such DNA damage in all systems examined occurred below $100millieq{\cdot}/kg$ in POV (peroxide value) Singlet oxygen $(^1O_2)$ and superoxide anion${\cdot}O_2^-$ greatly participated in the DNA damage during peroxidation of mackerel lipid, while hydrogen peroxide$(H_2O_2)$ and hydroxyl radical $({\cdot}OH)$ did little show the DNA damage. From the results of the addition of several active oxygen scavengers to the DNA-lipid systems, singlet oxygen ana superoxide anion greatly affected to the increase of POV ana to the DNA damage by mackerel lipid peroxidation, respectively. It indicates that there was a close relationship between the effects of active oxygens in the mackerel lipid peroxidation and its DNA damage mechanism.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4274-4282
• /
• 2011

In this study, Fenton reaction was studied for the possibility of applying as advanced treatment and its optimal condition for the removal of refractory organics from the dye wastewater. Fenton reaction was applied to remove refractory organics after the bio-treatment (secondary treatment) inside test laboratory and on-site pilot plant. Wastewater from the secondary treatment was used and its $COD_{Mn}$ was measured as 30~50mg/L. After the Fenton reaction, the optimal condition was found as pH 3~3.5, reaction time 2~2.5hr, chemical input ratio of ($FeCl_2$(33%)/$H_2O_2$(35%)) was 3 : 1. When chemical input ratio of ($FeCl_2$(33%)/$H_2O_2$(35%)) was at its optimal, amount of sludge volume ($SV_{2hr}$) was 21~28%. With pilot plant test, removal rate was heavily influenced by the hydraulic retention time(HRT), and optimum value of HRT was 2.0 hr. When pilot plant($2m^3/d$) was placed on-site and operated continuously, it showed steady and fairly good treatment of COD where COD removal rate was 60~70%, treated water showed below 20mg/L.