• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.85-86
• /
• 2013

AT-DMB의 향상계층은 DQPSK 신호에 BPSK 또는 QPSK 신호를 더하여 변조하는 계층변조 방식을 사용하였기 때문에 수신기에서 채널 왜곡을 보상해야 신호의 복조가 가능하다. 다중 경로가 많은 지역에서는 주파수 선택적 페이딩이 발생하기 때문에 페이딩을 정확하게 추정하지 못하면 AT-DMB 향상계층 수신 성능이 저하되게 된다. 채널왜곡 추정을 위하여 AT-DMB 수신기에서는 채널추정 값을 스무딩하는 대역제한 필터를 사용한다. AT-DMB의 향상 계층 성능은 이 스무딩 필터의 대역폭에 따라 결정이 되며 적절한 필터 대역을 채널의 지연에 따라 설정해야 한다. 특히 SFN 환경에서는 수신 전력이 큰 둘 이상의 서로 다른 지연시간을 가지면서 수신이 되기 때문에 고정 대역폭 스무딩 필터를 사용한 채널왜곡 추정은 성능의 저하를 가져올 수 있다. 본 논문에서는 채널 지연 값을 추정하고 필터의 대역폭을 가변적으로 결정하는 방법에 대하여 설명하고 실험 결과를 보여준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.443-450
• /
• 2011

Recently, various transmission techniques for communication and broadcasting systems have been developed to meet the dramatically increasing requirement of consumers. Because UWB (Ultra-Wideband) is a wireless communication technique that supports high data rate with low power, it can satisfy the requirement and can be applied to various wireless communication services. The multi-band orthogonal frequency division multiplexing (MB-OFDM) system, one of UWB system, is the wireless communication system that satisfies the transmission characteristic for UWB and so it can be used for various wireless communication services. In this paper, we propose a scheme that uses hierarchical modulation which is applied in digital video broadcasting system at the source and adaptive modulation based on the channel quality at the relays. The simulation results have shown that the proposed scheme has both the advantages of the increased throughput by 33% and similar BER performance to conventional scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.997-1005
• /
• 2008

In this paper, we proposed advanced T-DMB system which is based on Eureka-147 using UEP coding methods and hiererchical modulation for providing additional services while maintaining BER performance. We simulated the proposed advanced T-DMB system using unequal l6QAM modulation scheme combined with various bit split methods and coding methods such as double binary turbo code of DVB-RCS standard and LDPC code of DVB-S2 standard. In the simulation results, double binary turbo code and LDPC code of proposed advanced T-DMB system have coding gain of 2dB and 3.5dB compared to conventional T-DMB system respectively.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.297-310
• /
• 2013

With the explosive growth of internet data traffic due to the FTTH penetration, prevalence of smart devices and cloud network service, the demand for higher bandwidth is ever increasing with the pace of more than 40% annual growth. To accommodate ultra high bandwidth traffic, optical components in each hierarchy have progressed rapidly. WDM has begun to be deployed along with higher bandwidth service in the access network. Next-generation ROADM is under development for efficient network management in the metro network. For long-haul transmission, an advanced modulation scheme based on coherent transmission technology has been adopted to enhance spectral efficiency. In this paper, core components to meet the demands of high speed, high efficiency and low power consumption will be reviewed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.747-749
• /
• 2016

We consider a time-division multiple-access relay channel (MARC), in which two source nodes (SNs) transmit data with different data rate to a destination node (DN) with the help of a relay node (RN) using network coding (NC). However, due to its asymmetric data rate, the RN cannot combine the received bits by XOR NC. In this paper, we compare with the problem of asymmetric data rates by using zero padding and hierarchical 16QAM.

• Journal of Satellite, Information and Communications
• /
• v.3 no.2
• /
• pp.38-42
• /
• 2008

In 2005, DVB-S2 spec. was finalized. But with a large number of DVB-S receivers already installed, backwards compatibility may be required for a period of time, where old receivers continue to receive the same capacity as before, while the new DVB-S2 receivers could receive additional capacity broadcasts. To facilitate the reception of DVB-S serviced by DVB-S2 receivers, implementation of DVB-S in DVB-S2 chips is highly recommended. For the backward compatibility the system adapt the hierarchical modulation scheme. And the system has to meet system margin, so in this paper analyzes the effect according to the deviation angle and shows the BER performance. And finally this paper shows the result of the system implement using FPGA chip.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2004

A basic access method using for IEEE 802.11a wireless LANs is the DCF method that is based on the CSMA/CA. But, Since IEEE 802.11 MAC layer uses original backoff algorithm (Exponential backoff method), when collision occurs, the size of contention windows increases the double size. Hence, packet transmission delay time increases and efficiency is decreased by original backoff scheme. In this paper, we have analyzed TCP packet transmission time of IEEE 802.11 MAC DCF protocol for wireless LANs using a proposed enhanced backoff algorithm. From the results, in OFDM/quadrature phase shift keying channel (QPSK), we can achieve that the transmission time in wireless channel decreases as the TCP packet size increases and based on the data collected, we can infer the correlation between TCP packet size and total message transmission time, allowing for an inference of the optimal packet size in the TCP layer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.902-910
• /
• 2016

Recently, the volume of mobile data traffic increases exponentially due to the emergence of various mobile services. In order to resolve the problem of mobile traffic increase, various new technologies have been devised. Especially, two-way relay communication in which two nodes can transfer data simultaneously through relay node, has gained lots of interests due to its capability to improve spectral efficiency. In this paper, we analyze the SM-PNC which combines Physical-layer Network Coding (PNC) and Spatial Modulation (SM) under two-way relay communication environment. Log-Likelihood Ratio (LLR) is considered and both separate decoding and direct decoding have been taken into account in performance analysis. Through performance evaluation, we have found that the bit error rate of the proposed scheme is improved compared to that of the conventional PNC scheme, especially when SNR is high and the number of antennas is large.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2011

Power Line Communication (PLC) is a system for carrying data on a conductor used for electric power transmission. Recently, PLC has received much attention due to connection efficiency and possibility of extension. It can be used for not only alternative communication, in which communication line is not sufficient, but also for communication between home appliances. Korea Electronic Power Cooperation (KEPCO) is constructing the system, which automatically collects values of power consumption of every household. Due to the randomness and complicated physical characteristics of PLC protocol (KS X4600-1), it has been believed that the current PLC is secure in the sense that it is hard that an attacker guesses or modifies the value of power consumption. However, we show that the randomness of the protocol is closely related to state of the communication line and thus anyone can easily guess the randomness by checking the state of the communication line. In order to analyze the security of PLC, we study the protocol in detail and show some vulnerability. In addition, we suggest that PLC needs more secure protocol on higher layers. We expect that the study of PLC help in designing more secure protocol as well.