• The Korean Journal of Physiology
• /
• v.8 no.1
• /
• pp.27-30
• /
• 1974

It was planned to evaluate the influence of Panax Ginseng upon hepatic DNA synthesis in mice by observing incorporation of $[^3H]$ thymidine into the tissue cells. Thirty male mice$(body\;weight:\;18{\sim}20\;g)$ were divided equally into the ginseng and the saline groups. Each animal of the ginseng and the saline groups received every day (subcutaneously) 0.05 m1/10 g body weight of ginseng extract (4mg of ginseng alcohol extract in 1 ml of saline) and the same amount of saline, respectively, for 5 days. On the 5th experimental day, all animals received $1\;{\mu}Ci/g$ body weight of $[^3H]$ thymidine intraperitoneally 2 hours after the last medication. Five animals, at a lime, of each group were sacrificed 1, 10, and 24 hours after thymidine administration, and their hepatic radioactivity was measured autoradiographically in terms of the % number of radioactive cells in 1,000 cell counts (Radioactive Index, R.I.). Following results were obtained: 1. The hepatic radioactive indices obtained from the saline group 1, 10, and 24 hour after $[^3H]$ thymidine administration were $3.23{\pm}0.23,\;5.20{\pm}0.21,\;and\;6.00{\pm}0.30\;(mean{\pm}S.D.)$, respectively. 2. The corresponding values obtained from the ginseng group $(4.22{\pm}0.33,\;6.32{\pm}0.32,\;and\;7.42{\pm}0.35)$ were significant higher than the values of the saline group. The inference from the above results was that the ginseng facilitated hepatic DNA synthesis.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.11 no.1
• /
• pp.79-90
• /
• 2000

Objective：This study was performed in order to develop a measuring instrument for assessing and predicting delinquent behavior of the adolescents in Korea. Methods：This study was methodological research for developing a questionnaire for measuring delinquent behavior. Through the relevant literature review and personal interview using open-ended question with 12 adolescents in schools, outpatient basis and the juvenile corrective institutions, the author developed a pre-questionnaire with 31 items for assessing delinquent behavior among delinquentprone adolescents. Statistical method employed were test-retest reliability and Cronbach's alpha coefficient for testing reliability and factor analysis for testing validity of this questionnaire, and t-test for mean difference between student adolescents and delinquent adolescents, using SAS program. Subject served for this study consisted of 2,177 adolescents including 1,206 students and 971 delinquent adolescents by proportional stratified random sampling method. Results：1) Three stable factors were emerged and these contributed 52.2% of the variance in the total score. All 31 items loaded above .40 on each factor. 2) Factor I was named as antisocial delinquent behavior(17 items), factor II was named as aggressive delinquent behavior(8 items), and factor III was named as psychopathic delinquent behavior(6 items). 3) Comparison of these 3 factors between student adolescents and delinquent adolescents showed that there was a significant difference in factor Ⅰ(t=-42.91(student), -41.71(delinquent), p=.0001), factor II(t=-34.10(student), -35.72(delinquent), p=.0001), factor III(t=-14.24(student), -14.26 (delinquent), p=.0000), and total score(t=37.02(student), -36.38(delinquent), p=.0001). 4) Internal consistency reliability was tested by Cronbach's ${\alpha}$. Cronbach's ${\alpha}$ was .952 for total 31 items and .950, .866 and .721 for each 3 factors related to delinquent behavior. Conclusions：The author confirmed that this scale can use for measuring delinquent behavior, and hope to make a contribution to screening test and prevention of juvenile delinquency in Korea.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.1
• /
• pp.14-21
• /
• 1996

Objectives: Although outbreak of MDR Tb has been a recent problem in western countries, it has been a longstanding problem in Korea. The poor outcome of MDR Tb is mainly due to poor compliance, high rate of side reaction of secondary drugs, and limitation in number of available drugs. Thus, to improve the outcome of MDR Tb, it is crucial to make individualized adequate prescription based on the knowledge of the patterns of resistance to each drugs in the community as well as the natural history. The purpose of present study is to evaluate the clinical features of Korean MDR Tb patients including patterns of drug resistance and success rate of treatment which was prescribed according to the sensitivity tests. Methods: Retroscpective analysis of 71 Korean patients with MDR Tb was made. All strains isolated from patients showed resistence to at least two first line drugs. Patients profile, previous treatment history, patterns of drug resistance, outcome of treatment was analysed. Initial treatment regimen was selected according to the previous treatment history and was modified according to the sensitivity reports. The regimen was composed to include at least 4 sensitive drugs when possible. Results: The patients showed resistance to 4.1 drugs on average. 90% of them were resistant to INH and RFP. Among 71 patients, 35 patients(49%) had cavitary lesions in CXR. Treatment outcome was analysed in 55 patients. 35 patients(67%) were improved after treatment and 18 patients(33%) showed treatment failure. 5 patients showed primary resistance. Treatment outcome could be evaluated in 4 of them and all showed improvement after treatment. 14 patients(20%) had to change their regimens due to drug side effects. The most frequent side effect was elevation of liver enzymes(6 patients). Others included dizziness, hyperuricemia, tinnitus, skin rash, GI troubles. More than 50% of side effects developed within 3 months. In repeated drug sensitivity test, the concordance rate of resistance to INH was 100% and RFP 98%. EMB, PZA showed 80% concordance rate. But in the other drugs, the concordances were less than 50%. Operation was done in 5 patient - 1 patients as a adjunctive means of chemotherapy -. In that case, negative conversion of sputum AFB was done. Conclusion: 2/3 patients of multidrug-resistant tuberculosis were improved by appropriate prescription and regular medication suggesting that more aggressive management and monitoring is indicated in multidrug-resistant tuberculosis.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.96-113
• /
• 1996

It has been found that the misfit dislocations in heavily boron-doped layers originate from wafer edges. Moreover, the propagation of the misfit dislocation into a heavily boron-doped region can be suppressed by placing a surrounding undoped region. Using a surrounding undoped region the disloction-free heavily boron-deoped silicon membranes have been fabricated. The measured surface roughness, fracture strength, and residual tensile stress of the membrane are 20.angs. peak-to-peak, 1.39${\times}$10$^{10}$ and 2.7${\times}$10$^{9}$dyn/cm$^{2}$, while those of the conventional heavily boron-doped silicon membrane with high density of misfit dislocations are 500 peak-to-peak, 8.27${\times}$10$^{9}$ and 9.3${\times}$10$^{8}$dyn/cm$^{2}$ respectively. The differences between these two membranes are due to the misfit dislocations. Young's modulus has been extracted as 1.45${\times}$10$^{12}$dyn/cm$^{2}$ for both membranes. Also, the effective lattice constant of heavily boron-doped silicon, the in-plane lattice constant of the conventional membrane, and the density of misfit dislocation contained in the conventional membrane have been extracted as density of misfit dislocation contained in the conventional membrane have been extracted as density of misfit dislocation contained in the conventional membrane have been extracted as 5.424.angs. 5.426.angs. and 2.3${\times}$10$^{4}$/cm for the average boron concentration of 1.3${\times}$10$^{20}$/cm$^{-23}$ cm$^{3}$/atom. Without any buffer layers, a disloction-free lightly boron-doped epitaxial layer with good crsytalline quality has been directly grown on the dislocation-free heavily boron-doped silicon layer. X-ray diffraction analysis revealed that the epitaxial silicon has good crystallinity, similar to that grown on lightly doped silicon substrate. The leakage current of the n+/p gated diode fabricated in the epitaxial silicon has been measured to be 0.6nA/cm$^{2}$ at the reverse bias of 5V.

• Asian Journal of Turfgrass Science
• /
• v.19 no.2
• /
• pp.65-72
• /
• 2005

Creeping bentgrass (Agrostis palustris Huds.) had been the problematic weed for Kentucky bluegrass (Poa pratensis L.) fairway since it shows light green color all year. Experiment was carried out to determine the best herbicides combination to control creeping bentgrass in Kentucky bluegrass. fairway without injury. To investigate the efficacy of herbicides, five post-emergence herbicides of asulam WG ($87.6\%$), imazaquin SL ($20\%$), fenoxaprop-P-ethyl EC ($7\%$), mecoprop SL ($50\%$), triclopyr-TEA SL ($30\%$) and one pre-emergence herbicide pendimethalin EC ($31.7\%$) treated on 21 Sept. and 10 Nov. 2003. Kentucky bluegrass visual quality evaluated 30 and 50 days after application for phytotoxic effects of the herbicides. As a result, asulam WG (0.2g/$m^{2}$) and imazaquin SL (0.3ml/$m^{2}$) showed approximately $90\%$ of control in creeping bentgrass, but visual quality of Kentucky bluegrass significantly decreased from 20 to 50DAT (day after treatment). However, creeping bentgrass was acceptably controlled(over $80\%$) by fenoxaprop-P-ethyl EC (0.4ml/$m^{2}$)+triclopyr-TEA SL(0.3 ml/$m^{2}$) applied twice on 21 Sept. and 1 Oct. 2003 without serious injury on Kentucky bluegrass. Therefore, it is suggested that an application of fenoxaprop-P-ethyl EC (0.4ml/ $m^{2}$)+triclopyr-TEA SL (0.3 ml/$m^{2}$) may be more effective to control creeping bentgrass in Kentucky bluegrass with the least phytotoxicity by herbicides.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

In this paper, high LO-RF isolation W-band MIMIC single-balanced mixer was designed and fabricated using a branch line coupler and a $\lambda$/4 transmission line. The simulation results of the designed 94 GHz balun show return loss of -27.9 dB, coupling of -4.26 dB, and thru of -3.77 dB at 94 GHz, respectively. The isolation and phase difference were 23.5 dB and $180.2^{\circ}$ at 94 GHz. The W-band MIMIC single-balanced mixer was designed using the 0.1 $\mu$m InGaAs/InAlAs/GaAs Metamorphic HEMT diode. The fabricated MHEMT was obtained the cut-off frequency(fT) of 189 GHz and the maximum oscillation frequency(fmax) of 334 GHz. The designed MIMIC single-balanced mixer was fabricated using 0.1 $\mu$m MHEMT MIMIC Process. From the measurement, the conversion loss of the single-balanced mixer was 23.1 dB at an LO power of 10 dBm. Pl dB(1 dB compression point) of input and output were 10 dBm and -13.9 dBm respectively. The LO-RF isolations of single-balanced mixer was obtained 45.5 dB at 94.19 GHz. We obtained in this study a higher LO-RF isolation compared to some other balanced mixers in millimeter-wave frequencies.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.468-477
• /
• 2019

The numerical model of Boussinesq approximation, which is mainly used for evaluating the port calmness due to the irregular waves, has a limit of applicability of lattice size in ports such as marinas with narrow port openings of around 30m. The SWASH model controls the partial reflection according to the depth, porosity coefficient and structure size when applying the reflected wave incident on the structure and terrain. In this study, the partial reflection evaluation at the front of the structure according to the bottom shape and the shape of the structure are examined. In order to evaluate the reproducibility of the model due to the diffraction waves entering the term, the area of incidence at right angles and inclination of the structure is constructed and compared with the diffraction theory suggested by Goda et al. (1978). The experimental results of the sectional structure reflectances calculated as the depth mean show reflectances similar to the approximate values of the reflectances presented by Stelling and Ahrens (1981). It is considered that the reflected wave is well reproduced according to the control of the reflected wave at the boundary and the shape and topography of the structure. Compared with previous studies to examine the diffraction of the wave incident from the breakwater opening, the wave incidence angle and the shape of the diffraction wave are very similar to the theoretical values, but both oblique and rectangular incidence In the case where the direction concentration is small, the diffraction degree is underestimated in some sections with the crest ratio of 0.5 to 0.6.

• Journal of Environmental Impact Assessment
• /
• v.27 no.4
• /
• pp.353-366
• /
• 2018

The purpose of this study was assessment the quality of water by using the statistical analysis technique of the Water flow and water quality from January 2012 to December 2016 at the unit basin for total pollutant load management system (TPLMS) in the Imjin River. Water flow and water quality were monitored at an average of 8 day intervals, 11 parameters were used for correlation analysis, principal component analysis (PCA), factor analysis (FA), and cluster analysis (CA). The Hierarchical CA was classified into three according to the change of space, such as natural rivers, urban rivers, point with large influence of point pollution source, it was found that the type of contamination source the similarity of water quality affected the classification of cluster. Using one-way analysis of variance (ANOVA) and post-hoc Analysis, there were statistically significant differences between mean values among the clusters. Correlation analysis showed the correlation coefficient between $COD_{Mn}$ and TOC was 0.951 (p<0.01) and the correlation was statistically significantly higher. According to the result PCA and FA, 3 principal components can explaining 72% of the total variations in water quality characteristics and main factor was EC, $BOD_5$, $COD_{Mn}$, TN, TP and TOC indirect indicators of organic matter and nutrients were influenced. This study presented the regression equation obtained by applying the factor scores to the multiple linear regression analysis and concluded that the management Indirect indicators of organic matter and nutrients is important for water quality management in the Imjin River basin.