• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.378-379
• /
• 2012

Nowadays, great energy consumption in advanced electrical industry has called up the great y efficiency. Electric power IT industry such as intelligent electric power system is receiving great attention and being marked up as a new growth engine. Through Intelligent electric power system, the electric power supply can be balance optimized according to demand, giving huge cost savings advantage for energy imports, infrastructure construction and operation. Nevertheless, the intelligent system promotes better reliability in power supply. Manual electric power management using man power appears to be non-practical. Real time electric power management on all facilities and equipment can be done through an intelligent electric power system, any accident break out issue can be easily recorded and recognized. In this paper, a fully integrated intelligent switchgear electric management system is developed to monitor and remote control the electrical switch based on smart phone. The proposed system is superior than the existing switchgear management system's weakness and can sharply improve effectiveness and stability with low cost. In future, the proposed system is expected to be greatly contributed to the advancement of the IT industry in electric power management.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.55-64
• /
• 2015

Wind turbine market is showed height growth rate of about 30% for year, and is increasingly growing. Total rate of domestic wind turbine installation is showing share of 0.2% of the global market that is 380MW. However, wind turbine installed in domestic are foreign product more than 90%. Similarly, Datalogger of pretest system for ocean wind turbine plant installation has been leaked huge cost to abroad by mostly abroad company product. In this paper, we proposed pretest weather resource measurement system for efficiency and investment cost cutting of wind turbine construction work. Preset weather resource measurement system is ocean weather resource measurement datalogger based on wireless communication(wifi) that have consist of hardware and software(wind rose) that is able to monitoring as datalogger of wireless bridge and battery state, wind direction, wind speed, temperature, humidity, radiation around weather tower and is able to analysis of measured data.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.17-17
• /
• 2003

1960년대 경제개발 5개년 계획의 시작과 함께 우리나라 과학기술의 발전을 위한 투자가 본격화되었고, 과학기술 혁신이 정부정책의 가장 중요한 시책으로 부각되었다. 지난 40 여 년간 우리나라 과학기술은 선진기술의 모방에서 출발하여 효율적으로 단계별 성장을 거치면서 2000 년대에는 세계수준의 지식 및 기술을 창출할 수 있는 토대가 마련되었다. 본 발표에서는 한국과학기술의 현주소와 향후 전망을 분석하여 국내 연구개발의 방향을 조명해 보고자 한다. 1982년 특정연구개발사업을 시작으로 국가적 차원에서 목표설정 및 연구개발 자원을 전략적으로 집결하여 다양한 국가 연구개발 사업들이 수행되어 왔다. 그 후 20여년이 지난 현재 20개 부처에서 200 여개의 국가 연구개발사업이 추진되고 있으며, 이러한 연구개발사업의 성과로서 DRAM, TFT-LCD, CDMA 등 첨단 분야에서 세계 최고 수준의 국제경쟁력을 갖춘 기술들이 다수 확보되었다. 주력 산업인 IT산업, 자동차, 철강, 조선, 섬유 등도 기술혁신에 의한 국제 경쟁력 강화로 수출이 확대되면서 우리 경제의 견인차 역할을 하고 있다 최근 10년간 연구개발 투자규모는 3배 이상 증가하여 2000년 기준으로 세계 8위의 투자규모를 달성하였으며, 민간의 연구개발 투자 비중도 크게 늘어나 민간주도형 연구개발체제로 전환되게 되었다. 2001년에 이르러서는 총연구비 투자규모가 15조 이상으로서 이는 전체 GDP의 ∼3% 에 해당되는 수치이며 선진국 수준에 육박하고 있음을 짐작 할 수 있다. 지식기반사회를 선도하여 국가 경쟁력을 높이기 위해 정부는 연구개발 투자를 계속 확대할 정책을 시도하고 있으며 창의적 과학기술인력의 양성 체제 구축 및 효율적인 활용에도 적극 투자하고 있다. 과학기술부는 과학기술혁신의 중추적 역할을 담당하고 있으며 현재까지 20,000여개이상의 과제를 수행하여 국가경쟁력 강화에 크게 기여하여왔다. 정부는 국내외 과학기술 환경변화가 심한 21세기를 맞이하여 새로운 기회와 도약을 위하여 과학기술 중심국가 건설이라는 새로운 비전을 제시하게 되었다. vision 2025를 통해 2025년까지 21세기 첫 4반세기 동안 과학기술 경쟁력을 세계적인 수준으로 끌어올려 과학기술에 기반을 둔 선진국 진입을 실현하고자 다양한 정책적 대응을 물색하고 있다. 세계 시장규모, 전략적 중요성 등을 토대로 한 10대 산업을 육성하기 위하여 과학기술부는 기술수요조사를 바탕으로 49개 주요기술을 도출하여, 과학기술 일류 국가 실현, 국민소득 2만불 달성이라는 국가적 슬로건을 내걸고 “차세대 성장동력” 창출을 위한 범정부차원의 기획과 연구비의 집중투자를 추진하고 있다.

• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.23-30
• /
• 2006

This study was carried out to understand the relationship between orientation of tecto-lineaments obtained from aero-photograph and orientation of discontinuities measured at field for the rock types of igneous, sedimentary and metamorphic rocks in Andong area. Total 847 tecto-lineaments were extracted from the aero-photographs and total 1,940 discontinuities including joints, foliations and faults were measured during geologic survey. By using the software DIPS, preferred trends of tecto-lineaments were deduced as N30E-N40E for igneous rocks and N50E-N60E for both sedimentary and metamorphic rocks, while the trends of discontinuities were found as N40E-N50E for igneous rocks, N50E-N80E for sedimentary rocks and N50E-N60E for meta morphic rocks. Even though both orientations for a given rock type showed relatively good agreement in its trend, some discrepancy is also appeared. Since construction safety of geo-structures such as tunnel and slope, etc., is significantly affected by the orientation of discontinuities in rock masses, it is highly recommended to perform a detailed geologic survey as well as an aero-photograph interpretation at a design stage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.543-550
• /
• 2007

As an emerging materials in construction fields, FRP(fiber reinforced polymer) has been used in many area of civil engineering for its light weight and high strength. In this study we chose the 2nd Jindo-Bridge as a prototype, and evaluate effect of replacing steel components to FRP components through simplified 3D linear analysis. Static and modal analysis are done and the analysis results are compared with steel case analysis. From the static analysis results, the maximum stress of each component and maximum displacement of middle span are compared. Due to the reduction of deadload, the FRP structure causes less deflection than the original steel structure and from the reduced section (cable) analysis we confirmed the previous result. The occurrence wind velocity of flutter is compared by the frequency ratio.

• Journal of Korea Water Resources Association
• /
• v.37 no.4
• /
• pp.273-281
• /
• 2004

Generally, reservoir storage is allocated according to planned purposes established before construction and operating policies are established through release control. The established reservoir allocation is hardly changed unless the special cases such as raising dam or changed purposes occur It Is, however, likely that public needs and objectives can be changed as time go on, the study for multipurpose reservoir storage reallocation is performed as an alternative to reflect these. In this study, flood control analysis is performed for several alternatives of reallocation for the Daechung multi-purpose reservoir in Geum river. As a result, it is confirmed that flood control capability is not decreased compared to single operation of Daechung reservoir for the same flood condition even if conservation level of Daechung multi-purpose reservoir is increased.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.51-61
• /
• 2006

Interchanges are passages for vehicle and pedestrians and a gateway to nearby facilities, and a place to stay of vehicle and Pedestrians. Interchange traffic must be able to navigate well for safety and convenience. Traffic safety and efficiency are influenced by the interchange. In this study, relative delays of vehicles are compared by changing traffic interchanges. the volume of traffic, the number of lanes, the rate of left turns vehicle on the interchanges of urban arterial roads. The object of this study is to compare Grade crossing interchange, Diamond interchange. Roundabout interchange. SPUI(Single Point Urban Interchange), Echelon interchange). Echelon interchange. By VISSIM Simulation, this study drew the relative delay value of every scenario and compared the delay value of each vehicle considering construction expenses. Through this comparison study, ideal interchange is dependent on the volume of traffic, the number of lanes, and the rate of left turns.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.139-146
• /
• 2008

Conductors in overhead transmission lines are exposed under various environmental conditions for a long period of time, so that they may be slowly degraded due to air pollutant or thermal history. Aged conductors may reduce power system reliability and public safety. Therefore, diagnosis of aged conductors in service becomes more important concerns with respect to keeping power delivery stable with a proper capability, replacing aged conductors, or constructing a new line. In this paper, we posed a new method to diagnose the refurbishment life and estimate the remaining life of aged conductors by measuring dips. As analyzing some relations of conductor temperature, conductor current, and tension load, it could be verified that dip exactly shows mechanical tension loss for aged conductor. Based on several simulation results, it was shown that the proposed method may be effectively used to diagnose the refurbishment life or remaining one of overhead conductors.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.129-137
• /
• 2017

As the city continues to breed a variety of problems in the development process, in order to prevent the city's decline, the issue of urban regeneration is placed in the significant position among cities' problems. Based on the background of urban regeneration, this paper discussed the research status of urban regeneration in the current stage in various countries and obtained high value cases for analysis through the screening and evaluation. Through the analysis of the cases, outstanding measures had been acquired in developed countries on the urban regeneration. The essence and possibility of urban regeneration solutions had been explored from different angles. Finally, the key points of urban regeneration program solutions had been obtained to make the city keep a longer life and more vitality.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.345-358
• /
• 2003

Recently, the reuse of coarse aggregate derived from demolished concrete was introduced into practice with two environmental aspects: protection of natural sources of aggregate and recycling of construction waste. However, recycled aggregate has been used for the very limited application such as subbase material for pavement and constructional filling material because it was considered as low quality constructional materials. In the present study, in order to examine the possibility that recycled aggregate can be used for concrete mixing, we conducted various experimental tests to identify mineralogical, chemical and mechanical properties of recycled aggregate and to determine the workability and mechanical properties of recycled aggregate concrete (RAC). The cement paste and mortar contained in recycled aggregate significantly affect the basic mechanical properties of aggregate and the workability and mechanical properties of RAC. However, RCA mixed with the proper replacement ratio of recycled aggregate shows the comparable compressive strength and freeze and thaw resistance to those of normal concrete. Therefore, it is considered that recycled aggregate can be widely used for concrete if the cement paste and mortar can be efficiently removed from recycled aggregate and/or if the effective replacement ratios of recycled aggregate are applied for mixing concrete.