• Title/Summary/Keyword: 가슴벨트

Search Result 8, Processing Time 0.021 seconds

Effects of Thorax Belt Application on the Spinal Stability in Subjects with Wide Infra-sternal Angle

  • Ha, Sung-min
    • Journal of the Korea Society of Computer and Information
    • /
    • v.26 no.4
    • /
    • pp.143-147
    • /
    • 2021
  • The purpose of this study is to investigate how the application of a Thorax belt affects the stability of the spine in subjects with a wide infra-sternal angle. A total of 15 subject with wide infra-sternal angle participated in the experiment. Active Double leg lowering and active one-leg raising were performed with or without a thorax belt. Two spinal stability tests (active double lowering and active one-leg raising) performed with or without thorax belt application showed significant differences between each condition. Based on the results of present study, the application of a thorax belt is considered to be an effective therapeutic tool that can stabilize the spine to subjects with abnormally increased chest cage and spinal or trunk instability.

Study on the effect of 3 point belt on chest compression

  • Kim, Gyoung-Yong;Yang, Hyun-Mo
    • Journal of the Korea Society of Computer and Information
    • /
    • v.25 no.3
    • /
    • pp.169-176
    • /
    • 2020
  • This study suggested a method to increase the quality of chest compressions in patients with cardiac arrest during transport. When providing cardiopulmonary resuscitation to a cardiac arrest patient in the pre-hospital phase, the quality of chest compressions should be improved by using a three-point fixed belt to the ambulance. Because the quality of the chest compression was increased when the 119 paramedic wears a 3-point fixed belt in addition to the chest compression method. Also, paramedics are less likely to be at risk. Therefore, if a 3-point fixed belt is worn in an ambulance during transport, 119 paramedics will be able to secure safety and provide high-quality chest compressions to cardiac arrest patients.

Optimization of Seat belt Load Limiter for Crashworthiness (안전벨트 충돌하중특성 최적화)

  • Seo, bo pil;Choi, sung chul;Kim, beom jung;Han, sung jun
    • Journal of Auto-vehicle Safety Association
    • /
    • v.3 no.2
    • /
    • pp.5-10
    • /
    • 2011
  • Under the full frontal crash event, seatbelt system is the most typical and primary restraint device that prevents the second impact between an occupant and vehicle interior parts by limiting the forward motion of an occupant in the vehicle occupant packaging space. Today's restraint systems typically include the three-point seat belt with the pretensioner and the load limiter. A pretensioner preemptively tightens the seat belts removing any slack between a passenger and belt webbing which leads to early restraint of a passenger. After that a load limiter controls level of belt load by releasing the belt webbing to reduce occupant injurys. In this study, load characteristics of load limiters are optimized by the computer simulation with a MADYMO model for a frontal impact against the rigid wall at 56kph and then we suggest performance requirements. We derived optimum load characteristic from the results using four vehicle simulation models represented by the vehicle. Based on the results, we suggest the performance from the results of the second optimization using the simulation considering the design and the standardization. Finally, the performance requirements is verified by the sled tests including the load limiter device for the full vehicle condition.

A Study of the Heart Rate Detection Using Variable Threshold Method (가변 기준값을 이용한 심박동 검출 기법에 관한 연구)

  • Kim, Se-Jin;Jeong, Do-Un
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2008.10a
    • /
    • pp.222-226
    • /
    • 2008
  • 본 논문에서는 장시간 심전도를 측정하더라고 착용의 불편함을 최소화하기 위해 가슴에 착용 가능한 벨트형 심전도 전극을 제작하였다. 그리고 심전도 신호의 검출을 위하여 초저전력 계측시스템을 구현하였으며, Zigbee호환의 무선노드를 이용하여 계측된 심전도 신호를 PC측으로 무선 전송하는 시스템을 구현하였다. 또한 착용을 통해 장시간 심전도 측정이 가능하도록 움직임에 따른 동잡음을 제거하고자 하였으며, 이를 위해 적응 신호처리기법을 사용하였다. 그리고 가변 기준값을 이용하여 보다 정확한 심전도 R피크를 검출하고자 하였다. 구현된 적응신호처리와 R피크검출의 성능을 평가하기 위하여 MIT-BIH 데이터를 이용한 잡음제거성능 및 피크검출 실험을 수행하였으며, 실제 피검자를 대상으로 활동 중 심전도 계측 실험을 통해 구현된 시스템의 성능평가를 수행하였다.

  • PDF

Comparison of success rates of chest compressions performed with and without a rescuer's belt during transfer (이송 중 구조자용 벨트(EMT-belt) 착용에 대한 가슴압박 성공률 비교)

  • Kim, Gyoung-Yong
    • The Korean Journal of Emergency Medical Services
    • /
    • v.23 no.1
    • /
    • pp.113-123
    • /
    • 2019
  • Purpose: The aim of this study was to provide basic data to improve the survival rate of pre-hospital cardiac arrest patients. This study suggests a more effective method of performing effective chest compressions for a cardiac arrest patient in a moving ambulance. Methods: To compare the differences between gender and license (qualification), SPSS 18.0 (Windows) was used. Independent and paired t-tests were used for differences between before and after wearing a rescuer's belt. Results: The success rate of chest compressions according to gender was higher in males ($68{\pm}21.91%$) than in females ($25.04{\pm}16.88%$). There was no difference according to license ($44.70{\pm}26.63$ for paramedic, $45.05{\pm}19.25$ for nurse). However, the depth (mm) and the success rate (%) were improved during the evaluation of chest compressions when wearing the rescuer's belt (depth: $46.95{\pm}6.49$ vs. $49.55{\pm}6.05$, success rate: $44.80{\pm}24.66$ vs. $57.39{\pm}26.823$). Conclusion: Wearing a rescuer's belt in an ambulance during patient transport can result in deeper and more accurate chest compressions; therefore, it is expected to be effective in recovering the circulation of patient with cardiac arrest.

Effect of Ribcage Stabilization Using a Belt on EMG Activity of the Abdominal Muscles During Double Leg Lowering in the Supine Position (벨트를 이용한 가슴우리 고정이 누운자세에서 다리내리기 동안 복부 근육들의 근활성도에 미치는 영향)

  • Weon, Jonghyuck
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.5 no.2
    • /
    • pp.25-32
    • /
    • 2017
  • Purpose : The purpose of this study was to determine the effect of ribcage stabilization using a belt in the supine position during double leg lowering (DLL) by investigating the electromyographic (EMG) activities of the abdominal muscles. Methods : Twenty-two subjects with lumbar extension syndrome were recruited. EMG activity was recorded from rectus abdominalis (RA) and internal oblique abdominalis (IO), external oblique abdominalis (EO) muscles while subjects performed three double leg lowering exercises: double leg lowering (DLL), double leg lowering with abdominal draw-in maneuver (DLL-ADIM), and double leg lowering with ribcage stabilization using a belt (DLL-belt). RA, IO, and EO EMG activity were analyzed via one-way repeated-measures analysis of variance (ANOVA). Bonferroni correction was performed where significant differences were identified (p<.017, .05/3). Results : RA, IO, and EO EMG activity differed significantly among the three exercises (p<.05). The use of post hoc pair-wise comparison with Bonferroni correction showed that RA muscle activity significantly differed among the three exercises (p<.017), and IO muscle activity in the DLL exercise was significantly decreased compared to the DLL-ADIM and DLL-belt exercises (p<.017). There was no significant difference between IO muscle activity for DLL-ADIM and DLL-belt exercises (p>.017). EO muscle activity in the DLL-belt exercise was significantly increased compared to both DLL and DLL-ADIM exercises (p<.017), but there was no significant difference between EO muscle activity for DLL and DLL-ADIM exercises (p>.017). Conclusion : DLL-belt is a more effective exercise for activating the abdominal muscles than DLL-ADIM exercise. Therefore, we recommend DLL-belt exercises for strengthening the abdominal muscles.

The Clinical Effect and Construction of a Stereotactic Whole Body Immobilization Device (전신 정위 고정장치 제작과 임상효과에 대한 연구)

  • 정진범;정원균;서태석;최경식;진호상;지영훈
    • Progress in Medical Physics
    • /
    • v.15 no.1
    • /
    • pp.30-38
    • /
    • 2004
  • Purpose: To develop a whole body frame for the purpose of reducing patient motion and minimizing setup error for extra-cranial stereotactic radiotherapy, and to evaluate the repositioning setup error of a patient in the frame. Materials and Methods: The developed whole body frame is composed of a base plate, immobilizer, vacuum cushion, ruler and belts. The dimension of the base plate is 130 cm in length, 50 cm in width and 1 cm in thickness. The material used in the base plate of the frame was bakelite and the immobilizer was made of acetal. In addition, Radiopaque angio-catheter wires were engraved on the base plate for a coordinate system to determine the target localization. The measurement for radiation transmission and target localization is peformed in order to test the utilization of the frame. Also, a Matlab program analyzed the patients setup error by using the patient's setup images obtained from a CCTV camera and digital record recorder (DVR). Results: A frame that is useful for CT simulation and radiation treatment was fabricated. The frame structure was designed to minimize collisions from the changes in the rotation angle of the gantry and to maximize the transmission rate of the Incident radiation at the lateral or posterior oblique direction. The lightening belts may be used for the further reduction of the patient motion, and the belts can be adjusted so that they are not in the way of beam direction. The radiation transmission rates of this frame were measured as 95% and 96% at 10 and 21 MV, respectively. The position of a test target on the skin of a volunteer is accurately determined by CT simulation using the coordinate system in the frame. The estimated setup errors by Matlab program are shown 3.69$\pm$1.60, 2.14$\pm$0.78 mm at the lateral and central chest, and 7.11 $\pm$2.10, 6.54$\pm$2.22 mm at lateral and central abdomen, respectively. The setup error due to the lateral motion of breast is shown as 6.33$\pm$ 1.55 mm. Conclusion: The development and test of a whole body frame has proven very useful and practical in the radiosurgery for extra-cranial cancers. It may be used in determining target localization, and it can be used as a patient immobilization tool. More experimental data should be obtained in order to improve and confirm the results of the patient setup error.

  • PDF

Effect of Fabric Sensor Type and Measurement Location on Respiratory Detection Performance (직물센서의 종류와 측정 위치가 호흡 신호 검출 성능에 미치는 효과)

  • Cho, Hyun-Seung;Yang, Jin-Hee;Lee, Kang-Hwi;Kim, Sang-Min;Lee, Hyeok-Jae;Lee, Jeong-Hwan;Kwak, Hwi-Kuen;Ko, Yun-Su;Chae, Je-Wook;Oh, Su-Hyeon;Lee, Joo-Hyeon
    • Science of Emotion and Sensibility
    • /
    • v.22 no.4
    • /
    • pp.97-106
    • /
    • 2019
  • The purpose of this study was to investigate the effect of the type and measurement location of a fabric strain gauge sensor on the detection performance for respiratory signals. We implemented two types of sensors to measure the respiratory signal and attached them to a band to detect the respiratory signal. Eight healthy males in their 20s were the subject of this study. They were asked to wear two respiratory bands in turns. While the subjects were measured for 30 seconds standing comfortably, the respiratory was given at 15 breaths per minute were synchronized, and then a 10-second break; subsequently, the entire measurement was repeated. Measurement locations were at the chest and abdomen. In addition, to verify the performance of respiratory measurement in the movement state, the subjects were asked to walk in place at a speed of 80 strides per minute(SPM), and the respiratory was measured using the same method mentioned earlier. Meanwhile, to acquire a reference signal, the SS5LB of BIOPAC Systems, Inc., was worn by the subjects simultaneously with the experimental sensor. The Kruskal-Wallis test and Bonferroni post hoc tests were performed using SPSS 24.0 to verify the difference in measurement performances among the group of eight combinations of sensor types, measurement locations, and movement states. In addition, the Wilcoxon test was conducted to examine whether there are differences according to sensor type, measurement location, and movement state. The results showed that the respiratory signal detection performance was the best when the respiratory was measured in the chest using the CNT-coated fabric sensor regardless of the movement state. Based on the results of this study, we will develop a chest belt-type wearable platform that can monitor the various vital signal in real time without disturbing the movements in an outdoor environment or in daily activities.