• 대기
• /
• 제17권1호
• /
• pp.17-26
• /
• 2007

The station relocations, the replacement of instruments, and the change of a procedure for calculating derived climatic quantities from observations are well-known nonclimatic factors that seriously contaminate the worthwhile results in climate study. Prior to embarking on the climatological analysis, therefore, the quality and homogeneity of the utilized data sets should be properly evaluated with metadata. According to the metadata of the Korea Meteorological Administration (KMA), there have been plenty of changes in the procedure computing the daily mean values of temperature, humidity, etc, since 1904. For routine climatological work, it is customary to compute approximate daily mean values for individual days from values observed at fixed hours. In the KMA, fixed hours were totally 5 times changed: at four-hourly, four-hourly interval with additional 12 hour, eight-hourly, six-hourly, three-hourly intervals. In this paper, the homogeneity in the daily mean temperature dataset of the KMA was assessed with the consistency and efficiency of point estimators. We used the daily mean calculated from the 24 hourly readings as a potential true value. Approximate daily means computed from temperatures observed at different fixed hours have statistically different properties. So this inhomogeneity in KMA climate data should be kept in mind if you want to analysis secular aspects of Korea climate using this data set.

• 무역상무연구
• /
• 제15권
• /
• pp.89-116
• /
• 2001

Throughout the history of UCP, the longest lasting operational rules have been those derived from internationally acceptable best practices. I would propose that the effort to establish best practices be undertaken using four tools the SBPED, ISP98, the Opinions of the Banking Commission, and decisional law by respected courts in jurisdictions that influence letter of credit case law in the various regions. The SBPED and the ISP98 should be used; not only as a model for the drafting of future operational rules, but also as a questionnaire on best practices directed to all the national committees. The Opinions of the Banking Commission and the leading cases should be used to verify the soundness and enforceability of proposed rules. For this reason, I would suggest that the revision wait until the dust settles sometime in 2003 (10 years after the enactment of UCP 500) and we know if it is a good idea to attempt the drafting of new operational rules and whether to merge with closely related sets of rules. To do otherwise may entail a revision of the revision while it is still going on, or worse, discarding it before the ink dries or the electronic message reaches its intended recipient.

• Journal of Microbiology and Biotechnology
• /
• 제13권1호
• /
• pp.110-118
• /
• 2003

Pseudomonas syringae pv. actinidiae strains, which cause canker disease in kiwifruit, were collected from kiwifruit orchards in Korea and identified using biochemical and physiological tests. The nucleotide sequences of the 16s rDNA and 16s-23s internally transcribed spacer of the isolates were found to be Identical to those of' the pathotype strain, Kwl 1, of P syringae pv. actinidiae. Remarkably, no coding sequence for phaseolotoxin biosynthesis or phaseolotoxin- resistant ornithine carbamoyltransferase was found by PCR amplification in any of the new Korean isolates of pseudomonas syringae pv. actinidiae, although this was clearly identified in the control pathotype Kwl 1 reference strain. In contrast, three primer sets derived from the coronatine biosynthetic gene cluster and DNA from the Korean strains yielded amplified DNA fragments of the expected size. A sequence analysis of the PCR products revealed that P. syringae pv. actinidiae and the Korean strains of pv. actinidiae contain coronafncate ligase genes (cfl)with identical sequences, whereas their. corR genes exhibited 91% sequence similarity. The production of coronatine, instead of phaseolotoxin, by the Korean strains of P. syringae pv. actinidiae was confirmed by a bioassay using reference pathovars known to produce coronatine and phaseolotoxin. The genes for coronatine biosynthesis in the Korean strains of P. syringae pv. actinidiae were found to be present on plasmids.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.103-119
• /
• 2018

In the present research, an attempt is made to obtain a semi analytical solution for both nonlinear natural frequency and forced vibration of embedded functionally graded double layered nanoplates with all edges simply supported based on nonlocal strain gradient elasticity theory. The interaction of van der Waals forces between adjacent layers is included. For modeling surrounding elastic medium, the nonlinear Winkler-Pasternak foundation model is employed. The governing partial differential equations have been derived based on the Mindlin plate theory utilizing the von Karman strain-displacement relations. Subsequently, using the Galerkin method, the governing equations sets are reduced to nonlinear ordinary differential equations. The semi analytical solution of the nonlinear natural frequencies using the homotopy analysis method and the exact solution of the nonlinear forced vibration through the Harmonic Balance method are then established. The results show that the length scale parameters give nonlinearity of the hardening type in frequency response curve and the increase in material length scale parameter causes to increase in maximum response amplitude, whereas the increase in nonlocal parameter causes to decrease in maximum response amplitude. Increasing the material length scale parameter increases the width of unstable region in the frequency response curve.

• 대한의용생체공학회:의공학회지
• /
• 제12권4호
• /
• pp.235-242
• /
• 1991

This research has reported that the selection and assessment of treatment in anxiety disorders depend to a large extend on patient reports of somatic symptomatology. However, the correspondence between such reports and actual physiological data Is unknown as the physiological measures used were taken in laboratory. The purpose of the ambulatory momboring device is, therefore, to present for analysis physiological data derived from the sub jects during their daily activities. The physiological parameters of interest are heart rate, respiratory rate, skin conductance level/response, skin temperature, and activity level. This device had an microcomputer based data acquisition unit, Interfaced to it for the purpose of data collection. The data is collected usually over a period of 12 hours. The data from the ambulatory monitoring device can be used to assess the psychophysiology of anxiety in the field. The data from the device will also reveal if patients who report different sets of symptoms differ physiologically too. Thls will help physicians for the right kind of treatment and also solve the many uncertainties that have existed thus far in quantizing anxiety.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.213-218
• /
• 2011

The two-stage intermittent aeration activated sludge process (IAP) and dynamic-flow intermittent aeration activated sludge process (DFP) were investigated for the nutrient removal of domestic wastewater. Three sets of IAP and one set of DFP were operated. The fermented settled sludge taken from the primary settling tank was added to two IAP and one DFP as an external electron donor, with one IAP, in which an external carbon source was not added, as a control. All the systems were operated at a sludge retention time of 20 days and a hydraulic retention time of 12 hr. A Higher denitrification rate was observed with the fermented settled sludge for the denitrification compared to the process without the addition of the organic source. The result indicates that the fermented acid from the primary domestic sludge has been proved to be an excellent electron donor for denitrification and biological phosphorus removal with IAP and DFP in treating relatively low C/N ratio(Carbon / Nitrogen ratio) wastewater. Phosphate accumulating organisms have a capability of competing with denitrifiers in the presence of volatile organic acids under anoxic conditions.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.394-397
• /
• 2006

Gridded products of surface wind/wind-stress over the world ocean have been constructed by using satellite scatterometer as the Japanese Ocean Flux data sets with Use of Remote-sensing Observation (J-OFURO) data. Our previous validation study in the tropical Pacific using TAO/Triton and NDBC buoys revealed high reliability of our products. In this study, the Kuroshio Extension Observatory (KEO) buoy data are used for validation of other gridded wind-stress products including the NCEP-1 and 2 in the western North Pacific region where there have been few in-situ data. Results reveal that our J-OFURO product has almost zero mean difference and smallest root-mean-square (RMS) difference, while the NCEP-1 and 2 ones significantly positive biases and relatively high RMS difference. Intercomparison between the J-OFURO and NCEP products in a wide region of the North Pacific covered by the westerly winds exhibits that the NCEPs have larger magnitudes in the wind stress than the J-OFURO's, suggesting overestimation of the NCEPs.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.1-13
• /
• 2016

The increase of consumer needs for quality metal cutting related products with more precise tolerances and better product surface roughness has driven the metal cutting industry to continuously improve quality control of metal cutting processes. In this paper, two different approaches are discussed. First, design of experiments (DOE) is used to determine the significant factors and then fuzzy logic approach is presented for the prediction of surface roughness. The data used for the training and checking the fuzzy logic performance is derived from the experiments conducted on a CNC milling machine. In order to obtain better surface roughness, the proper sets of cutting parameters are determined before the process takes place. The factors considered for DOE in the experiment were the depth of cut, feed rate per tooth, cutting speed, tool nose radius, the use of cutting fluid and the three components of the cutting force. Finally the significant factors were used as input factors for fuzzy logic mechanism and surface roughness is predicted with empirical formula developed. Test results show good agreement between the actual process output and the predicted surface roughness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.791-796
• /
• 2007

When 2 sets of PID controllers are coupled directly each other to configure a closed control loop on behalf of coupling a controller and a plant. the behaviors or this exclusive loop system are expected to be unique in inherent system responses. If its properties be disclosed and generalized well in advance, it is possible for us to use the results for the purpose of fault detection and performance monitoring between control stations from the stage of system design. particularly in such cases as cascade control systems. In this paper. general properties of the proposed system are analyzed firstly to check whether it is controllable and how its steady responses would be. To simplify calculation, the analysis has been performed based on the transfer equation derived from a modelled case which consists of 2 PI controllers and signal converters between them. including time delay element and first-lag element to consider the situation of signal transmission. The results acquired from simulation are suggested to show how it works actually.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.97-104
• /
• 2007

Vibration analysis of a rigid body supported by in-parallel linear springs can be greatly simplified by utilizing the conditions for a plane of symmetry. The vibration modes of an oscillatory system having plane of symmetry are classified into the in-plane and out-of-plane modes. From the viewpoint of screw theory, they represent respectively the vibration axes perpendicular to the plane of symmetry and lying in the plane of symmetry. In this paper, the sets of orthogonal and mutually intersecting three springs are used as resilient support of a rigid body. The geometrical conditions for the system to have a plane of symmetry and diagonalized stiffness matrix are presented. From the orthogonality of the vibration modes with respect to the inertia matrix, the geometrical relation between the reaction wrenches and the vibration modes are derived. This geometrical relation is then used to get the cubic design equation for the design of out-of-plane modes. The numerical design example of engine mounts is presented in order to explain the suggested design technique.