Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Properties of Loop System Configured by Coupling 2 PI Controllers for Fault Diagnosis

고장진단을 위한 PI제어기간 직결합 루프시스템의 응답특성에 대한 연구

  • Published : 2007.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

When 2 sets of PID controllers are coupled directly each other to configure a closed control loop on behalf of coupling a controller and a plant. the behaviors or this exclusive loop system are expected to be unique in inherent system responses. If its properties be disclosed and generalized well in advance, it is possible for us to use the results for the purpose of fault detection and performance monitoring between control stations from the stage of system design. particularly in such cases as cascade control systems. In this paper. general properties of the proposed system are analyzed firstly to check whether it is controllable and how its steady responses would be. To simplify calculation, the analysis has been performed based on the transfer equation derived from a modelled case which consists of 2 PI controllers and signal converters between them. including time delay element and first-lag element to consider the situation of signal transmission. The results acquired from simulation are suggested to show how it works actually.

Keywords

References

  1. M. Sampath, R. Senguptaq, S. Lafortune, K. Sinnamohideen and T.C. Demosthemis, 'Fault Diagnosis using Discrete-Event Models', IEEE Trans. On Control Systems Technology, Vol.4, No.2, pp. 105-124, 1996 https://doi.org/10.1109/87.486338
  2. Gabor Karsai, Gautam Biswas, Tal Pasternak and Sriram Narasimhan, 'Fault-Adaptive Control: A CBS Application', IEEE International Conference on ECBS, pp. 205, 2001
  3. M. Sampath, S. Lafortune and D. Teneketzis, 'Active Diagnosis of Discrete-Event Systems', IEEE Trans. On Automatic Control, Vol.43, No.7, pp. 908-929, 1998 https://doi.org/10.1109/9.701089
  4. Sriram Narasimhan, Feng Zhao, Gautam Biswas and Elmer Hung, 'Fault isolation in hybrid systems combining model based diagnosis and signal processing', In Proc. 4th IFAC Symp. SafeProcess, pp. 1074-1079, 2000
  5. H. E. Rauch, 'Intelligent fault diagnosis and control reconfiguration', IEEE Control Systems Magazine, Vol.14, No.3, pp. 6-12, 1994 https://doi.org/10.1109/37.291462
  6. R. J. Patton, J. Chen and S. B. Nielsen, 'Model-Based Methods for Fault Diagnosis', Trans. of Institute of Measurement and Control, Vol.17, NO.2, pp. 73-76, 1995 https://doi.org/10.1177/014233129501700203
  7. M. Blanke, R. Izadi-Zamanabadi and T. F. Lootsma, 'Fault monitoring and re-configurable control for a ship propulsion plant', Journal of Adaptive Control and Signal Processing, Vol.12, No.8, pp. 671-688, 1998 https://doi.org/10.1002/(SICI)1099-1115(199812)12:8<671::AID-ACS531>3.0.CO;2-J
  8. M. Sampath, R. Sengupta, S. Lafortune, K. Sinnamohideen, and D. Teneketzis, 'Failure diagnosis using discrete-event models', IEEE Trans. on Control Systems Technology, Vol.4, No.2, pp. 105-124, 1980 https://doi.org/10.1109/87.486338