• Journal of Preventive Medicine and Public Health
• /
• v.43 no.2
• /
• pp.174-184
• /
• 2010

Objectives: This study shows the issues that should be considered when applying standardized rates using Community Health Survey(CHS) data. Methods: We analyzed 2008 CHS data. In order to obtain the reliability of standardized rates, we calculated z-score and rank correlation coefficients between direct standardized rate and indirect standardized rate for 31 major indices. Especially, we assessed the change of correlations according to population composition (age and sex), and characteristics of the index. We used Mantel-Haenszel chi-square to quantify the difference of population composition. Results: Among 31 major indices, 29 indices' z-score and rank correlation coefficients were over 0.9. However, regions with larger differences in population composition showed lower reliability. Low reliability was also observed for the indices specific to subgroups with small denominator such as 'permanent lesion from stroke', and the index with large regional variations in age-related differences such as 'obtaining health examinations'. Conclusions: Standardized rates may have low reliability, if comparison is made between areas with extremely large differences in population composition, or for indicies with large regional variations in age-related differences. Therefore, the special features of standardized rates should be considered when health state are compared among areas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.949-955
• /
• 2009

In this study, we investigated the effects of Cr dopant (1.0 at% $Cr_2O_3$ sintered at $1000^{\circ}C$ for 1 h in air) on the bulk trap (i.e. defect) and interface state levels of ZnO using dielectric functions ($Z^*$, $M^*$, $Y^*$, $\varepsilon^*$, and $tan{\delta}$), admittance spectroscopy (AS), and impedance-modulus spectroscopy (IS & MS). For the identification of the bulk trap levels, we examine the zero-biased admittance spectroscopy and dielectric functions as a function of frequency and temperature. Impedance and electric modulus spectroscopy is a powerful technique to characterize grain boundaries of electronic ceramic materials as well. As a result, three kinds of bulk defect trap levels were found below the conduction band edge of ZnO in 1.0 at% Cr-doped ZnO (Cr-ZnO) as 0.11 eV, 0.21 eV, and 0.31 eV. The overlapped defect levels ($Zn^{..}_i$ and $V^{\cdot}_0$) in admittance spectra were successfully separated by the combination of dielectric function such as $M^*$, $\varepsilon^*$, and $tan{\delta}$. In Cr-ZnO, the interfacial state level was about 1.17 eV by IS and MS. Also we measured the resistance ($R_{gb}$) and capacitance ($C_{gb}$) of grain boundaries with temperature using impedance-modulus spectroscopy. It have discussed about the stability and homogeneity of grain boundaries using distribution parameter ($\alpha$) simulated with the Z"-logf plots with temperature.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.180-187
• /
• 2001

The structure of current guides is largely illogical and without any rational use of color ordering. The shade guides are generally made of plastic (rather than the actual composite material) and do not accurately depict the true shade. translucency. or opacity of the composite resin after polymerization. To solve this problem, information based on evaluations of natural teeth and material that use the same method and experimental conditions is necessary. The present investigation measured the color of natural maxillary anterior teeth in vivo and compared the results with those of composite resins. 269 Korean subjects were selected for this study. Intact central incisor. lateral incisor. and canine were selected. The clinical crowns were free of caries or restorations. The middle site of the coronal portion on the labial surface of the tooth was measured by Chroma Meter. The five light activated. resin-based materials (Amelogen, Denfil, Elitefil, Spectrum, Z100) were used in this study. Resin composite was condensed into plastic mold with a diameter of 8mm and a thickness of 4mm. pressed between glass plates to flatten the surfaces. and polymerized using a Visilux II visible light activation unit. The surfaces were polished sequentially on wet sandpaper. Color measurements of each specimen were accomplished by Chroma Meter. A computer program that compares each tooth color with each composite resin color was written and the minimum CIELAB color difference ($\Delta$E$^*$) between tooth and each material was calculated. Under the conditions of this study: 1. Teeth tend to become darker with advancing age. 2. Canines were darker. more yellow. and less green than incisors. 3. The teeth from the women were lighter. more green. and less yellow than the male teeth. 4. In general. composite resins were lighter. more green. and less yellow than teeth. Deficiencies were noted in Hues in YR range. 5. Mean color differences between the five composite resin products and teeth were detectable to the naked eye($\Delta$E$^*$>1.0). 6. In comparing the mean $\Delta$E$^*$ values of materials. Spectrum showed the least followed by Z100, Elitefil, Amelogen, Denfil in increasing order.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.35.2-35.2
• /
• 2014

Today, it is widely accepted that dense environments tend to accelerate galaxy evolution. However, according to recent studies, the environments where galaxies evolve most considerably are galaxy groups rather than galaxy clusters. In an isolated group, the central host galaxy and its satellites co-evolve and interact with each other; as a result, they tend to have similar properties. Such conformity between host and satellite galaxies are relatively well known in galaxy groups, but it is hardly studied what happens after such galaxy groups merge into a galaxy cluster. Recently, J. H. Lee et al. (2014) have found that the colors of bright galaxies in WHL J085910.0+294957, a galaxy cluster at z = 0.3, show a measurable correlation with the mean colors of faint companions around them, which may be the vestige of infallen groups in the cluster. As a follow-up study, we explore more galaxy clusters, Abell 3659 and Abell 1146 at z ~ 0.1, using deep images obtained from the Magellan (Baade) 6.5-m telescope. Cluster members are selected based on the distributions of color, size and concentration along magnitude and spatial distribution. We investigate the dependence of the mean colors of faint companion galaxies on local environments and the properties of adjacent bright galaxies. After comparing the results with those in J. H. Lee et al. (2014), we discuss the origin of the relationships between bright galaxies and their faint companions based on their dependence on cluster properties.

• Korean Journal of Environment and Ecology
• /
• v.21 no.5
• /
• pp.432-441
• /
• 2007

This study was done to classify the Quercus forests, along with their interpretations of environmental conditions, located in the lower montane zones of Mt. Bakdal, Gyemyeong, Boryeon, Worak, Cheondeung, Joryeong, Gugmang, Buyong, Duta, Malloe, Midong, Gamak, Sirubong, Sipjabong and Yongsanbong in Chungbuk Province, According to the methodology of the Z.-M. schools of phytosociology, the Quercus forests were classified into three communities and two subcommunities A. Quercus variabilis community, A-1. Quercus acutissima subcommunity, A-2. Typical subcommunity; B. Quercus mongolica community; C. Quercus dentata community. These vegetation units were arranged by human interferences and a gradient of environmental complex such as altitudes, and also were corresponded relatively well with the result of cluster analysis(UPGMA), based on the dominance of component species.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.171-181
• /
• 2009

The objective of this study was to analyse stress distribution of maxillary complex by use of face mask. The construction of the three-dimensional FEM model was based on the computed tomography(CT) scans of 13.5 years-old male subject. The CT image were digitized and converted to the finite element model by using the mimics program, with PATRAN. An anteriorly directed force of 500g was applied at the first premolar 45 degrees downwards to the FH plane and at the first molar 20 degrees downwards to the FH plane. When 45 degrees force was applied at maxillary first premolar, there were observed expansion at molar part and constriction at premolar part. The largest displacement was 0.00011mm in the x-axis. In the y-axis, anterior displacement observed generally 0.00030mm at maximum. In the z-axis, maxillary complex was displaced 0.00036 mm forward and downward. When 20 degrees force was applied at maxilla first molar, there were observed expansion at lateral nasal wall and constriction at molar part. The largest displacement was 0.001mm in the X-axis. In the Y-axis, anterior displacement observed generally 0.004mm at maximum. In the Z-axis, ANS was displaced upward and pterygoid complex was displaced downward. The largest displacement was 0.002mm.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.49.3-50
• /
• 2015

Synchrotron radiation of relativistic electrons is an important radiation mechanism in many astrophysical sources. In the sources where the synchrotron cooling timescale is shorter than the dynamical timescale, electrons are cooled down below the minimum injection energy. It has been believed that such fast-cooling electrons have a power-law distribution in energy with an index -2, and their synchrotron radiation has a photon spectral index -1.5. On the other hand, in a transient expanding astrophysical source, such as a gamma-ray burst (GRB), the magnetic field strength in the emission region continuously decreases with radius. Here we study such a system, and find that in a certain parameter regime, the fast-cooling electrons can have a harder energy spectrum. We apply this new physical regime to GRBs, and suggest that the GRB prompt emission spectra whose low-energy photon spectral index has a typical value -1 could be due to synchrotron radiation in this moderately fast-cooling regime.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.419-422
• /
• 2007

This paper, designed UWB elliptical slot antenna and analysis based on the distribution of the electromagnetic fields pattern and resonant mode of designed antenna is presented. Designed antenna is fabricated on FR4 substrate with thickness of 1.524mm and relative dielectric constant 4.4. The measured bandwidth of $3.6GHz{\sim}20GHz$ for VSWR<2. Through the field pattern and resonant mode analysis that the slot antenna operates on a series of the multi-pole radiation based on TE modes matched to system impedance. And the perfect magnetic wall is along the axis of symmetry on the y-z plane. This result gives us an easier method to design the similar antennas, which is the impedance matching to the system impedance after once constructing a proper structure with a series of multi-mode resonances.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.8
• /
• pp.820-827
• /
• 1990

For the purpose of investigation the thrust force, the lateral force, and the eddy current loss when the primary and the secondary of a single-sided linear induction motor is displaced in the space, this paper proposes an analysis technique for the characteristics of the eddy current induced on the secondary and the magnetic flux density distribution in the y-z plane by F.E.M. To verify the effectiveness of this analysis technique, the starting-thrust force due to a lateral displacement is compared to the experimental data.

• International Journal of Reliability and Applications
• /
• v.16 no.2
• /
• pp.55-79
• /
• 2015

It is well known that using any additional information in the estimation of unknown parameters with new sample of observations diminishes the sampling units needed and minimizes the risk of new estimators. There are many rational reasons to assure that the existence of additional information in practice and there exists many practical cases in which additional information is available in the form of target value (initial value) about the unknown parameters. This article is described the problem of how the prior initial value about the unknown parameters can be utilized and combined with classical Bayes estimator to get a new combination of Bayes estimator and prior value to improve the properties of the new combination. In this article, two classes of Bayes-shrinkage and preliminary test Bayes-shrinkage estimators are proposed for the scale parameter of exponential distribution. The bias, risk and risk ratio expressions are derived and studied. The performance of the proposed classes of estimators is studied for different choices of constants engaged in the estimators. The comparisons, conclusions and recommendations are demonstrated.