• 분석과학
• /
• 제19권4호
• /
• pp.301-308
• /
• 2006

본 연구에서 $CCl_4$용해 방법을 이용하여 피치 코팅한 $TiO_2$(anatase형)시료를 제조하였으며, 피치와 $TiO_2$의 비율이 피치 처리한 $TiO_2$시료의 광활성에 미치는 영향에 대하여 고찰하였다. BET 비표면적은 피치의 함량에 의존하였으며 피치의 함량이 증가함에 따라 증가하는 특성을 보였다. 시료의 표면상태 및 원소분석은 SEM와 EDX를 통하여 분석하였으며, 미세구조는 XRD를 통해서 연구하였다. 또한 제조한 광촉매의 광활성으로 UV/VIS를 조사한 것을 특성분석을 하였다. SEM사진으로 보면 피치의 첨가량이 많기 때문에 피치의 분포상태를 분명하게 관찰할 수 있으며, EDX원소 분석결과는 피치 코팅한 $TiO_2$ 광촉매에서 C, O, S와 Ti 같은 네 가지 원소가 존재하였다. 코팅과정 후에도 $TiO_2$ 상은 anatase형을 나타내고 있었다. 피치 코팅한 $TiO_2$은 처리하지 않는 $TiO_2$보다 MB의 UV광분해 효력이 더 우수하였다. 그리고 시료에 $TiO_2$양이 감소함에 따라 MB의 UV광분해 효력이 감소하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.423-423
• /
• 2011

Zinc oxide is metal oxide semiconductor with the 3.37 eV bandgap energy. Zinc oxide is very attractive materials for many application fields. Zinc Oxide has many advantages such as high conductivity and good transmittance in visible region. Also it is cheaper than other semiconductor materials such as indium tin oxide (ITO). Therefore, ZnO is alternative material for ITO. ZnO is attracting attention for its application to transparent conductive oxide (TCO) films, surface acoustic wave (SAW), films bulk acoustic resonator (FBAR), piezoelectric materials, gas-sensing, solar cells and photocatalyst. In this study, we synthesized ZnO nanoparticles and defined their physical and chemical properties. Also we studied about the application of ZnO nanoparticles as a photocatalyst and try to find a enhancement photocatalytic activity of ZnO nanorticles.. We synthesized ZnO nanoparticles using spray-pyrolysis method and defined the physical and optical properties of ZnO nanoparticles in experiment I. When the ZnO are exposed to UV light, reduction and oxidation (REDOX) reaction will occur on the ZnO surface and generate O2- and OH radicals. These powerful oxidizing agents are proven to be effective in decomposition of the harmful organic materials and convert them into CO2 and H2O. Therefore, we investigated that the photocatalytic activity was increased through the surface modification of synthesized ZnO nanoparticles. In experiment II, we studied on the stability of ZnO nanoparticles in water. It is well known that ZnO is unstable in water in comparison with TiO2. Zn(OH)2 was formed at the ZnO surface and ZnO become inactive as a photocatalyst when ZnO is present in the solution. Therefore, we prepared synthesized ZnO nanoparticles that were immersed in the water and dried in the oven. After that, we measured photocatalytic activities of prepared samples and find the cause of their photocatalytic activity changes.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.251-255
• /
• 2004

Laboratory experiments were performed to investigate oxidation system using ozone and hydrogen peroxide for treating water contaminated with phenol. We were able to greatly improve the oxidation efficiency of the aqueous phenol using hydrogen peroxide and ozone. Two methods were compared and analyzed in this study. In the consequence through the methods, we concluded that the $O_3/UV$ is superior to the hydrogen the results. The decomposition efficiency of aqueous phenol by $H_2O_2$. was exceeded at 83.3% in the concentration of phenol, 5, 15, 25 ppm, respectively. The rate of decomposition reaction by $H_2O_2$. was very slow. In the occasion of the fractional life, it was determined the value that $1.61{\times}10^{-5}(l/mol)^{1.172}sec^{-1}$, $3.75{\times}10^{-5}(l/mol)^{0.792}sec^{-1}$, $4.11{\times}10^{-5}(l/mol)^{1.782}sec^{-1}$. The rate of decomposition reaction of aqueous phenol by $O_3$ was fast compared to the $H_2O_2$. We concluded that the $O_3$ method is useful with the consideration of the reaction time 30 minutes. In the occasion of the fractional life, it was determined the value that $1.094{\times}10^{-4}(l/mol)^{0.933}sec^{-1}$, $2.1{\times}10^{-4}(l/mol)^{0.842}sec^{-1}$, $7.22{\times}10^{-4}(l/mol)^{1.332}sec^{-1}$.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.157-163
• /
• 1995

The ultraviolet blocking agents used to skincare are largely classified ultraviolet scattering agent and ultraviolet absorbent agents. There are UVC, UVB, and UBA in ultraviolet ray(UV) showing shorter wavelength than visible light. Both visible light and UVA give rise to 1st dark-skinned phenomena. On exposure of the skin to UV, phenomena of skin variation are termed sunburn or suntan. There are chronic and acute adverse reactions in skin response to UV. The latter is caused by UVB, which has mainly effects on the skin. But lately due to destruction of ozone layer, UVA has more serious irritation on the skin than UVB. In this paper spectrometric properties of UV absorbent agents such as PABA, octyl-PABA, Urocanic acid, and 2-hydroxy-4-methoxy benzophenone in vitro have been investigate. As results, it was found that the three fomer were more suitable than the last. UV scattering measurements on the sample used inorganic pigments showed that pigments containing titanium dioxide had a better scattering effects than the inorganic pigments such as $Fe_2O_3$, $Al_2O_3$, etc.

• 한국환경보건학회지
• /
• 제31권5호
• /
• pp.415-422
• /
• 2005

The photocatalytic decolorization of Reactive Red 2B(RR2B) was studied using immobilized photocatalyst/UV System. Two pairs of 20 W UV-B and UV-C lamps were employed as the light source. Immobilization of $TiO_2$ was carried out using sponge (as the photocatalyst body) and silicone sealant(as the binder). The effects of parameters such as the thickness, pore size of sponge photocatalyst and attached material on the reactor bottom were investigated. The results showed that the optimum thickness of sponge photocatalyst was 1 cm. Decolorization of reactor which had the bottom coated $TiO_2$ was higher than that of reactor attached aluminum plate. Decolorization of photocatalyst with large pore size(mean pore size, 3.8 mm) was higher than that of the small(mean pore size, 1.75 mm). Initial decolorization of RR2B could be descrived using the Langmuir-Hinshelwood(L-H) model and gave constant values of $0.55mg/l{\cdot}min(k)\;and\;2.65{\times}10^{-2}l/mg(K)$, respectively.

• International Journal of Oral Biology
• /
• 제46권3호
• /
• pp.105-110
• /
• 2021

The physicochemical properties of crystalline titanium dioxide nanoparticles (TiO₂ NPs) were investigated by comparing amorphous (amTiO₂), anatase (aTiO₂), metaphase of anatase-rutile (arTiO₂), and rutile (rTiO₂) NPs, which were prepared at various calcination temperatures (100℃, 400℃, 600℃, and 900℃). X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed that the phase-transformed TiO₂ had the characteristic features of crystallinity and average size. The surface chemical properties of the crystalline phases were different in the spectral analysis. As anatase transformed to the rutile phase, the band of the hydroxyl group at 3,600-3,100 cm^-1 decreased gradually, as assessed using Fourier transform infrared spectroscopy (FT-IR). For ultraviolet-visible (UV-Vis) spectra, the maximum absorbance of anatase TiO₂ NPs at 309 nm was blue-shifted to 290 nm at the rutile phase with reduced absorbance. Under the electric field of capillary electrophoresis (CE), TiO₂ NPs in anatase migrated and detected as a broaden peak, whereas the rutile NPs did not. In addition, anatase showed the highest photocatalytic activity in an UV-irradiated dye degradation assay in the following order: aTiO₂ > arTiO₂ > rTiO₂. Overall, the phases of TiO₂ NPs showed characteristic physicochemical properties regarding size, surface chemical properties, UV absorbance, CE migration, and photocatalytic activity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1355-1359
• /
• 2006

Due to its efficient red emission, $Eu^{3+}$ ion has been doped in various host materials. $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor for red emission has been prepared by solid state reaction. Photoluminescence properties for the phosphor under UV and VUV excitation were investigated. The $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor under both excitation conditions shows typical red emission spectrum centered at 611 nm with several weak peaks due to energy transfer from $^5D_O\;to\;^7F_J(J=1,2,3,4)$ of $Eu^{3+}$ ion. On the other hand, the activator content exhibiting the concentration quenching under UV and VUV irradiation is 10 mole% and 2.5 mole%, respectively.

• 한국염색가공학회지
• /
• 제25권2호
• /
• pp.94-101
• /
• 2013

Poly(acrylonitrile) (PAN) nanofibers containing different amounts of titanium dioxide ($TiO_2$) have been prepared by electrospinning technique. Photocatalytic activity of these electrospun PAN/$TiO_2$ nanofibers and the effect of $TiO_2$ content on the photocatalytic efficiency of PAN/$TiO_2$ nanofibers have been evaluated by monitoring the photodecomposition of fluorescein dye, rhodamine B and methylene blue under UV irradiation with respect to irradiation time. Moreover, the effect of hydrogen peroxide ($H_2O_2$) on the photocatalytic behavior of PAN/$TiO_2$ nanofibers has also been investigated. The results showed that PAN/$TiO_2$ nanofibers are effective photocatalyst and their photocatalytic efficiency increases with the increase of $TiO_2$ content in the PAN/$TiO_2$ nanofibers. It is also observed that the presence of $H_2O_2$ significantly enhances the photocatalytic ability of PAN/$TiO_2$ nanofibers. The morphology and the photocatalytic behavior of the PAN/$TiO_2$ nanofibers containing different amounts of $TiO_2$ nanoparticles have been investigated by field-emission scanning electron microscopy (FE-SEM) and UV/Visible spectroscopy, respectively.

• 멤브레인
• /
• 제23권1호
• /
• pp.61-69
• /
• 2013

고도정수처리를 위한 관형 세라믹 정밀여과와 이산화티타늄($TiO_2$) 광촉매 첨가 PES (polyethersulfone) 구의 혼성공정에서 유기물질의 영향 및 정밀여과(MF), PES 구 흡착, 광산화의 역할을 막오염에 의한 저항($R_f$) 및 투과선속(J), 총여과부피($V_T$)를 통해서 비교 및 고찰하였다. 휴믹산의 농도가 증가함에 따라 급격한 막오염으로 인해 $R_f$는 증가하고 J는 감소하였으며, $V_T$는 휴믹산의 농도가 2 mg/L인 조건에서 가장 높았다. 광산화와 흡착의 영향을 알아보기 위해 휴믹산의 농도 4 mg/L와 6 mg/L에서의 결과를 비교하였다. 두 가지 조건에서 공통적으로 정밀여과(MF)만의 단독공정에서 막오염이 급격하게 진행되어 $R_f$값이 가장 높게 나타났고, 총여과부피($V_T$)는 광촉매와 자외선의 혼성공정(MF + $TiO_2$ + UV)에서 가장 높은 값을 나타내었다. 탁도와 유기물질의 평균처리효율은 MF + $TiO_2$ + UV 공정에서 가장 높은 값을 나타내었다.

• 대한환경공학회지
• /
• 제37권1호
• /
• pp.34-44
• /
• 2015

본 연구는 기존의 광촉매 산화 기술에서 주로 사용된 자외선램프의 단점을 보완할 수 있는 대체 광원인 자외선 LED를 사용하여 자유 시안을 폐수로부터 제거하는 공정을 평가하고자 수행되었다. 특히 광촉매 산화 공정의 다양한 영향 인자들에 대해 살펴보았다. 연구 결과, 자외선 LED는 기존의 광원인 자외선램프를 대체할 수 있는 적용성을 확인할 수 있었다. 뿐만 아니라 LED 개수를 증가할수록 광촉매 산화 반응의 효율은 증가하였으나, 공정의 경제성과 효율성을 동시에 만족시키기 위해서는 최적의 LED의 개수를 선정할 필요가 있다는 것을 확인하였다. 광촉매로 이용된 아나타제(anatase), 루틸(rutile), Degussa P25 등 세 종류의 $TiO_2$ 중 Degussa P25가 가장 높은 성능을 보였으며, 아나타제(anatase)와 루틸(rutile)을 특별한 전처리 과정없이 단순하게 혼합하였을 때는 Degussa P25 만큼의 공정의 효율은 얻지 못했다. 또한 $TiO_2$의 입자 크기가 작을수록 광촉매 산화 반응이 더욱 활발하게 이루어졌다. 그리고 광촉매 산화 반응에 있어 주로 전자 수용체 역할을 수행하는 산소를 주입함으로써 공정의 효율이 증진되는 효과를 얻을 수 있었다.