• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.32.2-32.2
• /
• 2016

We present the catalog of the KVN Calibrator Survey (KVNCS). This first part of the KVNCS is a single dish radio survey conducted at 22 (K band) and 43 GHz (Q band) simultaneously using the Korean VLBI Network (KVN) from 2009 to 2011. A total 2045 sources selected from the VLBA Calibrator Survey (VCS) with an extrapolated flux limit of 100 mJy at K band. The KVNCS contains 1533 sources in the K band with a flux limit of 70 mJy and 553 sources in the Q band with a flux limit of 120 mJy; it covers the whole sky down to -32. ${\circ}$ 5 in declination. Five hundred thirteen sources were detected in the K and Q bands, simultaneously; ~76% of them are flat-spectrum sources ($-0.5{\leq}{\alpha}{\leq}0.5$). From the flux-flux relationship, we anticipated that the most of the radiation of many of the sources comes from the compact components. Therefore, the sources listed in the KVNCS are strong candidates for high frequency VLBI calibrators.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• Kyungpook Mathematical Journal
• /
• v.58 no.4
• /
• pp.637-650
• /
• 2018

In this paper first we show properties of isosymmetric operators given by M. Stankus [13]. Next we introduce an [m, C]-symmetric operator T on a complex Hilbert space H. We investigate properties of the spectrum of an [m, C]-symmetric operator and prove that if T is an [m, C]-symmetric operator and Q is an n-nilpotent operator, respectively, then T + Q is an [m + 2n - 2, C]-symmetric operator. Finally, we show that if T is [m, C]-symmetric and S is [n, D]-symmetric, then $T{\otimes}S$ is [m + n - 1, $C{\otimes}D$]-symmetric.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.444-444
• /
• 2011

Recently, patterned magnetic films and elements attract a wide interest due to their technological potentials in ultrahigh-density magnetic recording and spintronic devices. Among those patterned magnetic structures, magnetic anti-dot patterning induces a strong shape anisotropy in the film, which can control the magnetic properties such as coercivity, permeability, magnetization reversal process, and magneto-resistance. While majority of the previous works have been concentrated on anti-dot arrays with a single magnetic layer, there has been little work on multilayered anti-dot arrays. In this work, we report on study of the magnetic properties of bilayered anti-dot system consisting of upper perforated Co layer of 40 nm and lower continuous Ni layer of 5 nm thick, fabricated by photolithography and wet-etching processes. The magnetic hysteresis (M-H) loops were measured with a superconducting-quantum-interference-device (SQUID) magnetometer (Quantum Design: MPMS). For comparison, investigations on continuous Co thin film and single-layer Co anti-dot arrays were also performed. The magnetic-domain configuration has been measured by using a magnetic force microscope (PSIA: XE-100) equipped with magnetic tips (Nanosensors). An external electromagnet was employed while obtaining the MFM images. The MFM images revealed well-defined periodic domain networks which arise owing to the anisotropies such as magnetic uniaxial anisotropy, configurational anisotropy, etc. The inclusion of holes in a uniform magnetic film and the insertion of a uniform thin Ni layer, drastically affected the coercivity as compared with single Co anti-dot array, without severely affecting the saturation magnetization ($M_s$). The observed changes in the magnetic properties are closely related to the patterning that hinders the domain-wall motion as well as to the magneto-anisotropic bilayer structure.

• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.131-142
• /
• 2002

Geomagnetic transfer function is generally estimated by choosing transfer to minimize the square sum of differences between observed values. If the error structure sccords to the Gaussian distribution, standard least square(LS) can be the estimation. However, for non-Gaussian error distribution, the LS estimation can be severely biased and distorted. In this paper, the Gaussian error assumption was tested by Q-Q(Quantile-Quantile) plot which provided information of real error structure. Therefore, robust estimation such as regression M-estimate that does not allow a few bad points to dominate the estimate was applied for error structure with non-Gaussian distribution. The results indicate that the performance of robust estimation is similar to the one of LS estimation for Gaussian error distribution, whereas the robust estimation yields more reliable and smooth transfer function estimates than standard LS for non-Gaussian error distribution.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.192-198
• /
• 2007

In this paper, a new method to reduce the size of ROM in the direct digital frequency synthesizer(DDFS) is proposed. The new ROM compression method can reduce the ROM size by using the two ROM. The quantized value of sine is stored by the quantized-ROM(Q-ROM) and the differential ROM(D-ROM). To reduce the ROM size, we use the differential quantization technique with this two ROM. First, we quantize the quarter sine wave with the $2^L$ address and store the quantized value at the Q-ROM. Second, after the $2^L$ address are equally divided into $2^M$ sampling intervals, the sampling value is quantized. And the D-ROM store only the difference between this quantized value and the Q-ROM. So the total size of the ROM in the proposed DDFS is significantly reduced compared to the original ROM. The ROM compression ratio of 67.5% is achieved by this method. Also, the power consumption is affected mostly by this ROM reduction.

• Clinical and Experimental Reproductive Medicine
• /
• v.46 no.3
• /
• pp.112-118
• /
• 2019

Objective: Oxidative stress contributes to male infertility, and antioxidants have been recommended for treating idiopathic oligoasthenoteratozoospermia (OAT). There is, however, a lack of agreement on the type, dosing, and use of individual antioxidants or combinations thereof. The purpose of this study was to compare the effects of two doses of coenzyme Q10 (CoQ10) on semen parameters and antioxidant status in men with idiopathic OAT. Methods: In this prospective study, patients with idiopathic OAT received 200 mg/day (n = 35) or 400 mg/day (n = 30) of CoQ10 orally for 3 months. All patients underwent semen analysis according to the fifth editions of the World Health Organization criteria. Total antioxidant capacity (TAC), catalase (CAT) activity, and superoxide dismutase (SOD) activity were measured both before and after treatment. Results: Treatment with CoQ10 (200 mg/day or 400 mg/day) resulted in a significant increase in sperm concentration from baseline ($8.22{\pm}6.88$ to $12.53{\pm}8.11million/mL$, p= 0.019; $7.58{\pm}5.41$ to $12.33{\pm}6.1million/mL$, p= 0.002, respectively), progressive motility ($16.54%{\pm}9.26%$ to $22.58%{\pm}10.15%$, p=0.011; $14.22%{\pm}12.85%$ to $26.1%{\pm}14.52%$, p= 0.001, respectively), and total motility ($25.68%{\pm}6.41%$ to $29.96%{\pm}8.09%$, p= 0.016; $23.46%{\pm}12.59%$ to $34.82%{\pm}14.17%$, p= 0.001, respectively). CoQ10 therapy also increased TAC (p= 0.009, p= 0.001, respectively), SOD activity (p= 0.004, p= 0.001, respectively), and CAT activity (p= 0.039, p= 0.024, respectively). Furthermore, antioxidant measures correlated significantly with seminal fluid parameters (r = 0.36-0.76). Conclusion: CoQ10 supplementation improved semen parameters and antioxidant status in men with idiopathic OAT, with a greater improvement shown in men who took 400 mg/day than in those who took 200 mg/day.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.165-175
• /
• 1985

The natural forest vegetation of the Piagol, Mt. Chiri, was classified into five major communities, i.e. Quercus mongolica, Carpinus laxiflora, C. tschonoskii, Q. serrata and Fraxinus mandshurica community. C. tschonoskii, C. laxiflora and Q. mongolica characteristically were dominated in the range of 500∼700 m, 700∼900 m and 900∼1,400 m in altitude, respectively. Abies nephrolepis and Rhododendron schlippenbachii in the ridge of Nogodan-Nalnaribong, and F. mandshurica and Q. serrata in the Yongsuam ravine were found as the dominant species. The transition between C. tschonoskii and C. laxiflora communities was relatively wide. The boundary between F. mandshurica, in the conglomerated zone, and the other communities surrounding its community was fairly abrupt. In Q. mongolica community, the canopy was relatively opened and the oak young tree of undergrowth was fairly dense. In the community of C. laxiflora and C. tschonoskii, the species composed of their understory was rich while their coverage was lower than that of Q. mongolica community. Shannon's diversity index was decreased in order of C. tschonoskii, C. laxiflora and Q. mongolica community, while their Simpson's dominance index increased conversely. Judging by the DBH-class distribution showing the negative exponential curve, these communities were considered as the climax forest. In Polar Ordination used samples (quadrats), the vegetation of the Piagol was divided into five groups, which was coincided with five communities classified by Braun-Blanquet system. In the ordination, the first axis and the second axis may be considered soil conditions and thermal conditions, respectively. It seems that two different methods, phytosociological method in macro level and ordination techniques in micro level, are useful for the vegetation classification.

• Geomechanics and Engineering
• /
• v.35 no.5
• /
• pp.539-554
• /
• 2023

This article is dedicated to the pursuit of establishing a robust empirical relationship that allows for the estimation of in-situ modulus of deformations (E_m and G_m) within sedimentary rock slope masses through the utilization of Q_slope values. To achieve this significant objective, an expansive and thorough methodology is employed, encompassing a comprehensive field survey, meticulous sample collection, and rigorous laboratory testing. The study sources a total of 26 specimens from five distinct locations within the South Pars (known as Assalouyeh) region, ensuring a representative dataset for robust correlations. The results of this extensive analysis reveal compelling empirical connections between E_m, geomechanical characteristics of the rock mass, and the calculated Q_slope values. Specifically, these relationships are expressed as follows: E_m = 2.859 Q_slope + 4.628 (R² = 0.554), and G_m = 1.856 Q_slope + 3.008 (R² = 0.524). Moreover, the study unravels intriguing insights into the interplay between in-situ deformation moduli and the widely utilized Rock Mass Rating (RMR) computations, leading to the formulation of equations that facilitate predictions: RMR = 18.12 E_m0.460 (R² = 0.798) and RMR = 22.09 G_m0.460 (R² = 0.766). Beyond these correlations, the study delves into the intricate relationship between RMR and Rock Quality Designation (RQD) with Qslope values. The findings elucidate the following relationships: RMR = 34.05e^0.33Qslope (R² = 0.712) and RQD = 31.42e^0.549Qslope (R² = 0.902). Furthermore, leveraging the insights garnered from this comprehensive analysis, the study offers an empirically derived support system tailored to the distinct characteristics of discontinuous rock slopes, grounded firmly within the framework of the Q_slope methodology. This holistic approach contributes significantly to advancing the understanding of sedimentary rock slope stability and provides valuable tools for informed engineering decisions.

• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.229-242
• /
• 2012

This study presents a physical habitat modeling of adult Zacco platypus in a reach of the Dalcheon Stream located downstream of the Goesaan Dam. CASiMiR model is used to estimate habitat suitability index based on the fuzzy logic. Results are compared with those from River2D model, which uses habitat preference curve for habitat suitability index. Hydraulic data simulated by River2D are used as input data for CASiMiR model after verification against field measurements. The result shows that the habitat suitability of the adult Zacco platypus is maximum around the riffle area located upstream of the bend. CASiMiR and River2D estimate the maximum weighted usable areas at the discharge rates of 7.23 $m^3/s$ and 9.0 $m^3/s$, respectively. Overall comparison of the two models employed in this study indicates that CASiMiR model overestimates the weighted usable area by 0.3~25.3% compared with River2D model in condition of drought flow (Q355), low flow (Q275), normal flow (Q185), and average-wet flow (Q95).