• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.192-198
• /
• 2006

In this study, the light addressable potentiometric sensors (LAPS) with $Si_{3}N_{4}/SiO_{2}/Si$, and $Ta_{2}O_{5}/SiO_{2}/Si$ structures were fabricated. The penicillinsae was immobilized on the devices to hydrolyze the penicillin using self-assembled monolayer (SAM) method. Then response characteristics according to the penicillin concentrations were measured and compared. The measuring system was simplified by using LabVIEW. The pH response characteristics of fabricated devices are 56 mV/pH ($Si_{3}N_{4}$ sensing membrane) and 61 mV/pH ($Ta_{2}O_{5}$ sensing membrane). The sensitivity of sensor by enzyme reaction result of the enzyme reaction were 60 mV/decade and 74 mV/decade for $Si_{3}N_{4}/SiO_{2}/Si$ and $Ta_{2}O_{5}/SiO_{2}/Si$ structure, respectively, in the range of $0.1\;mM{\sim}10\;mM $of the penicillin concentration.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.221-227
• /
• 2007

Fenton's reagent is applied to directly decompose the ion-exchange resins, IRN-78 and the mixed resin with IRN-77. The newly applied procedures is to dry the resin first and the catalyst solution is completely absorbed into the resin, then a limited dose of $H_2O_2$ is introduced for an effective reaction between the reagents within the resin. As a characteristic on the decomposition of IRN-78, the resin mixture should be heated to $40^{\circ}C$ to induce the initial reaction and lag time is also needed for about 20 minutes until the main reaction occurs. The effectiveness of the decomposition is investigated using $CuSO_4,\;Cu(NO_3)_2\;and\;FeSO_4$ as a catalyst and the decomposition rate is compared depending on the concentration of each catalyst and the amount of $H_2O_2$. The most effective catalyst was found to be $FeSO_4$ for IRN-78 alone and the mixed resin with IRN-77, and $FeSO_4$ showed a special effect that the reaction was initiated without heating and a lag time. Furthermore, the optimum concentration of the catalyst for each resin and the mixed one is suggested in the view point of the amount of $H_2O_2$ needed and the stability of the decomposition reaction.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.768-772
• /
• 2010

In this study, the neuronal cell protective effects of methanol extract from cheonggukjang were evaluated. The proximate composition and total phenolics of the methanol extract were 40.95% crude protein, 22.49% crude fat, 15.99% nitrogen free extract, 7.91% moisture, 6.74% crude ash, 5.92% crude fiber, and 28.43 mg/g of total phenolics. Intracellular ROS accumulation resulting from $H_2O_2$ treatment of PC12 cells was significantly reduced when methanol extract was present in the media compared to PC12 cells treated with $H_2O_2$ only. In a cell viability assay using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium-bromide (MTT), the methanol extract showed protective effects against $H_2O_2$-induced neurotoxicity, and lactate dehydrogenase (LDH) release into the medium was also inhibited. Furthermore, the inhibitory effect of the methanol extract against acetylcholinesterase was dose-dependent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.271-274
• /
• 2000

Gas sensor materials capable of detecting hydrogen gases (H$_2$) or nitrogen oxides (NO$\_$x/, primarily NO and NO$_2$) with high sensitivity have attracted much interest in conjunction with the growing concern to the protection of global environments. Beside conventional sensor materials, such as semiconductors., conducting polymers and solid electrolytes, the potential of sensor materials with a new method for detecting hydrogen gases or nitrogen oxides gas has also been tested. The breakdown voltage of porous varistors shifted to a low electric field upon exposure to H$_2$ gas, whereas it shifted to a reverse direction in an atmosphere containing oxidizing gases such as O$_3$ and NO$_2$ in the temperature range of 300 to 600$^{\circ}C$. Furthermore, it was found that the magnitude of the breakdown voltage shift, i. e. the magnitude of sensitivity, was well correlated with gas concentration, and that the H$_2$ sensitivity was improved by controlling the composition of the Bi$_2$O$_3$ rich grain boundary phase. However, NO$\_$x/ sensing properties of porous varistors have not been studies in detail. The objective of the present study is to investigate the effect of the composition of the Bi$_2$O$_3$ rich grain boundary phase and other additive such as A1$_2$O$_3$ on the hydrogen gases (H$_2$) sensing properties of porous ZnO based varistors.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.83-87
• /
• 2010

Crystal structure of coumarin 6 has been solved by X-ray diffraction. The crystals are triclinic, space group P-1, with a=8.823(2) ${\AA}$, b=8.898(2) ${\AA}$, c=11.025(9) ${\AA}$, ${\alpha}$=86.41(3)$^{\circ}$, ${\beta}$=85.39(3)$^{\circ}$, ${\gamma}$=76.23(3)$^{\circ}$, Mr=350.42, V=837.1(3) ${\AA}^3$, Z=2 and R=0.0516. The molecules are packed parallel to each other by weaker ${\pi}{\cdots}{\pi}$ and C-H${\cdots}{\pi}$ interactions. The detailed geometry of C-H${\cdots}{\pi}$ interactions were discussed. The hydrogen bonds and non-traditional C-H${\cdots}O$ interactions join the no-parallel molecules together. All the molecules packed wall-like with the molecular brick.

• Journal of Surface Science and Engineering
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1982

80% Ni-Permalloy is soft magnetic material with high initial permeability and low magnetic coercive force Hc, and is used to computer memory cores and minirelays of communication e-ngineering. In this paper 80 Permalloy thin film on copper cathode was alloy-deposited from Watts so-lution contatining FeSO4$.$7H2O. The amount of FeSO4$.$7H2O in the solution, pH, temperature of the solution and plating current density were varied as parameters and the resulting comp-osition changes of deposited film were analyzed electrochemically with respect to the parame-ters. From the above procedure electroplating conditions for deposition of 80 Permalloy were est-ablished as following: 17-21 g/$\ell$ of FeSO4$.$7H2O in Watts solution, current density 1.0-2.0 Amp/dm2, pH 2.5-3.0 and temperature range of 50-60$^{\circ}C$.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.290-290
• /
• 1994

The binding characteristic of oxomemazine to muscarinic receptor in the cerebrum, heart, and ileum were compared to those of pirenzepine to investigate whether oxomemazine could classify the muscarinic receptor subtypes. 〔$^3$H〕Quinucl idinyl benzilate(QNB) identified a single class of muscarinic receptors with apparent K$\sub$D/ value of about 60 pM in three tissues. Analysis of the pirenzepine inhibition curve of 〔$^3$H〕QNB binding to cerebral microsome indicated the presence of two receptor subtypes with high (Ki=16 nM, M$_1$-receptor) and low (Ki=400 nM, M$_2$-receptor) affinity for pirenzepine. Oxomemazine also identified two receptor subtypes with high (Ki=84 nM, On-receptor) and low (Ki=1 4 ${\mu}$M, O$\sub$L/-receptor) affinity in rat cerebral microsome, The percentage population of the M$_1$-and M$_2$-receptors to the total receptors were 61 : 39, and those of the O$\^$H/- and O$\sub$L/-receptors 39 : 61, respectively, However, the Hill coefficients of these two drugs for the inhibition of 〔$^3$H〕QNB binding to the heart and ileum were close to unity which indicated that these drugs bound to a uniform population of receptors in these two tissues. The Ki values for the low affinity sites of pirenzepine and oxomemazine in the cerebrum were similar to those of these drugs in the heart ileum. Both pirenzepine and oxomemazine increased K$\sub$D/ value for 〔$^3$H〕QNB without affecting the binding sites concentration and Hill coefficient for the 〔$^3$H〕QNB binding. Oxomemazine had a 10-fold lower affinity at Ma-receptors than at M$_1$-receptors, and pirenzepine a 8-fold lower affinity at O$\sub$L/-receptors than OH-receptors. Analysis of the shal low competition curves of oxomemazine for the H$_1$ receptors and pirenzepine for the O$\sub$L/-receptors yielded that 69% of the M$_1$-receptors were of the O$\sub$H/-receptors and the remaining 31% of the O$\sub$L/-receptors, and that 29% of the O$\sub$L/-receptors were of the M$_1$-receptors and 71% of the M$_2$-receptors. However, M$_2$ for oxomemazine and O$\sub$H/ for pirenzepine were composed of a uniform population. These results suggest that oxomemazine could discriminatethe muscarnic receptor subtypes and may subclassify the M$_1$-receptors into two subtypes.

• Korean Journal of Materials Research
• /
• v.15 no.5
• /
• pp.353-360
• /
• 2005

Surface treatment play an important role in nucleating calcium phosphate deposition on surgical Ti implant. Therefore, the purpose of this study is to examine whether the precipitation of apatite on cp-Ti and Ti alloys are affected by surface modification in HCl and $H_2O_2$ solution. Specimens were then chemically treated with a solution containing 0.1 M HCl and 8.8M $H_2O_2$ at $80^{\circ}C$ for 30 mins, and subsequently heat-treated at $400^{\circ}C$ for 1 hour. All specimens were immersed in the HBSS with pH 7.4 at $36.5^{\circ}C$ for 15 days, and the surface was examined with XRD, SEM, EDX ana XPS. Also, pure Ti, Ti-6Al-4V and Ti-6Al-7Nb alloy specimens with and without surface treatment were implanted in the abdominal connective tissue of mice for 4 weeks. All specimens chemically treated with HCl and $H_2O_2$ solution have the ability to form a apatite layer in the HBSS which has inorganic ion composition similar to human blood plasma. The average thickness of the fibrous capsule surrounding the specimens implanted in the connective tissue was $38.57\;{\mu}m,\;62.27\;{\mu}m\;and\;45.64\;{\mu}m$ in the cp-Ti, Ti-6Al-4V ana Ti-6Al-7Nb alloy specimens with the chemical treatment respectively, and $52.20\;{\mu}m,\;75.62\;{\mu}m\;and\;66.56\;{\mu}m$ in the commercial specimens of cp-Ti, Ti-6Al-4V and Ti-6Al-7Nb without any treatment respectively. The results of this evaluation indicate that the chemically treated cp-Ti, Ti-6Al-4V ana Ti-6Al-7Nb alloys have better bioactivity and biocompatibility compared to the other metals tested.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.84-88
• /
• 1999

In chlorine dioxide delignigication or bleaching, chlorate is mainly formed by the reaction between chlorite and hypochlorous acid, thus scavengers of chlorine or hypochlorous acid can be used to reduce the formation of chlorate which is unfavorable to environment. In this study, additives such as sulfamic acid, DMSO, hydrogen peroxide, or sodium chlorite was added to chlorine solution or pure $ClO_2$ solution to check their reactivity with $Cl_2$ and $ClO_2$. These additives were also added directly into general $ClO_2$ solution which contained certain amount of chlorine, then the additive-treated $ClO_2$ solution were used in bleaching stages. The aim of this procedure was to remove the original amount of chlorine that was thought to be possibly the main reason for the formation of chlorate and AOX. The additives were found to be able to eliminate chlorine very fast and selectively, but $H_2$ $O_2$ should be used under pH4, otherwise it also reacts with $ClO_2$. After the additives reacted With $Cl_2$, DMSO turned into an inactive product $(CH_3)_2SO_2$, While Sulfamic acid turned into $HClSO_3H$ that still remained active in oxidation, and $NaClO_2$ produced $ClO_2$. The addition of $HNaClO_2$ showed significant improvement in delignification but the deeper delignification led to higher formation of chlorate. When the additive-treated chlorine dioxide solutions were used in bleaching, both sulfamic acid, DMSO, and hydrogen peroxide showed no significant changes of DE brightness and Kappa number. The formation of chlorate was reduced by addition of sulfamic acid, DMSO and hydrogen peroxide.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.155-157
• /
• 1991

This paper describe a Laser CVD technology which realizes planarized interlevel dielectrics in sub-micron VLSI's. This technology comprises sub-micron gap filling with $SiO_2$ films between metal lines. Laser CVD process conditions have been investigated to improve step coverage of interlevel dielectrics. An ArF(193nm) Excimer Laser was used to excite and dissociate gas phase $SiH_4\;and\;N_2O$ molecules. The Laser CVD by $N_2O\;and \;SiH_4$. mixture gases has realized conformal deposition above the temperature of $300^{\circ}C$, as a result sub-micron gaps were buried with $SiO_2$ films.