• 제목/요약/키워드: ${\pi}$-type

검색결과 651건 처리시간 0.028초

SESIP 시스템의 스윙업과 안정화 제어 (Swing-up and Stabilization Control of a SESIP System)

  • 소명옥;유희한;류기탁;이윤형;이종환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권2호
    • /
    • pp.310-317
    • /
    • 2010
  • 본 논문은 전형적 비선형 시스템인 셀프 이렉팅 도립진자 시스템의 스윙업과 안정화에 대한 제어 방법을 제안한다. 펜던트 상태의 진자를 PV 제어기를 이용하여 스윙업 시키고, 진자가 적절한 위치에 도달했을 경우 PI형 상태피드백 제어기로 스위칭하여 진자가 넘어지지 않게 유지시키도록 한다. 시뮬레이션을 통하여 제안한 제어기법의 유효성을 확인한다.

산업용 냉각기의 열부하 변화에 대응한 정밀온도제어 특성 (Characteristics of Precise Temperature Control of Industrial Cooler on Thermal Load)

  • 백승문;최준혁;변종영;문춘근;정석권;윤정인
    • 동력기계공학회지
    • /
    • 제14권2호
    • /
    • pp.34-39
    • /
    • 2010
  • Recently, technical trend for machine tools is focused on enhancement of speed and accuracy. High speedy processing causes thermal and structural deformation of objects from the machine tools. Water cooler has to be applied to machine tools to reduce the thermal negative influence with accurate temperature controlling system. Existing On-Off control type can't control temperature accurately because compressor is operated and stopped repeatedly and causes increment of power consumption and decrement of the expected life of compressor. The goal of this study is to minimize temperature error in steady state. In addition, control period of an electronic expansion valve were considered to increment of lifetime of the machine tools and quality of product with a water cooler. PI controller is designed using type of hot-gas bypass for precise control of temperature. Gain of PI is decided easily by method of critical oscillation response, excellent performance of control is shown with 4.24% overshoot and ${\pm}0.2^{\circ}C$error of steady state. Also, error range of temperature is controlled within $0.2^{\circ}C$although disturbance occurs.

레이저 유도 초음파를 이용한 재료평가 및 비파괴 검사 시스템 개발에 관한 연구 (The Study on the Material Evaluation and Development of Nondestructive Inspection System Using Laser Guided Ultrasonics)

  • 김재열;송경석;김창현;김유홍
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2004년도 추계학술대회 논문집
    • /
    • pp.263-268
    • /
    • 2004
  • In the present study, a Nd;YAG Laser (pulse type) was used to emit ultrasonic signals to a test material. In addition, a total ultrasonic investigation system was designed by adopting a Fabry-Perot interferometer, which receives ultrasonic signals without any contact. For non-destructive test SM45C, which contains some flaws was used as a test material. Because it is easy to align light beam in receiver, and the length of the light beam does not change much even if convex mirror leans towards one side, confocal Fabry-Perot interferometer, which has stable frequency, and PI control are used to correct interfered and unstable signals from temperature, fluctuation and time shift of laser frequency. Stable signals are always obtained by the feedback of PI circuit signals in the confocal Fabry-Perot interferometer. The type, size and position of flaws inside the test material were examined by achieving the stabilization of an interferometer. This study presented a useful method, which could quantitatively investigate the fault of objects by using a Fabry-Perot interferometer.

  • PDF

Thermo- and Acid/base-induced Spectral Switching of a Poly(N-isopropylacrylamide) Copolymer Containing Benzopyran-based D-π-A type Dye Units

  • Lee, Eun-Mi;Gwon, Seon-Yeong;Ji, Byung-Chul;Kim, Sung-Hoon
    • 한국염색가공학회지
    • /
    • 제22권3호
    • /
    • pp.181-186
    • /
    • 2010
  • A thermoresponsive poly(NIPAM-co-dye) labeled with benzopyran-based D-$\pi$-A type dye was prepared by typical radical copolymerization. It can be also constructed a acid/base-induced molecular switch by modulation of intramolecular charge transfer with protonation/deprotonation. The lower critical solution temperature behavior was investigated by means of UV-vis spectroscopy which allows the measurement of the phase transition from $25^{\circ}C$ to $45^{\circ}C$ in aqueous DMSO solution. The morphology of the internal microstructure of the poly(NIPAM-co-dye) hydrogel was observed by scanning electron microscopy. The reversible switch could be obtained by thermal and acid/base stimuli.

Design of a 1~10 GHz High Gain Current Reused Low Noise Amplifier in 0.18 ㎛ CMOS Technology

  • Seong, Nack-Gyun;Jang, Yo-Han;Choi, Jae-Hoon
    • Journal of electromagnetic engineering and science
    • /
    • 제11권1호
    • /
    • pp.27-33
    • /
    • 2011
  • In this paper, we propose a high gain, current reused ultra wideband (UWB) low noise amplifier (LNA) that uses TSMC 0.18 ${\mu}m$ CMOS technology. To satisfy the wide input matching and high voltage gain requirements with low power consumption, a resistive current reused technique is utilized in the first stage. A ${\pi}$-type LC network is adopted in the second stage to achieve sufficient gain over the entire frequency band. The proposed UWB LNA has a voltage gain of 12.9~18.1 dB and a noise figure (NF) of 4.05~6.21 dB over the frequency band of interest (1~10 GHz). The total power consumption of the proposed UWB LNA is 10.1 mW from a 1.4 V supply voltage, and the chip area is $0.95{\times}0.9$ mm.

속도 오버슈트 발생 시 제한 속도를 초과하지 않는 실속형 블레이드 풍력터빈의 속도제어기 설계 (Design of Speed Controller for Stall Blade Wind Turbine Complying with the Speed Limit During Speed Overshoot)

  • 김예찬;송승호
    • 전력전자학회논문지
    • /
    • 제27권5호
    • /
    • pp.438-445
    • /
    • 2022
  • Blade efficiency decreases when the rotor speed is kept constant even though the wind speed is higher than the rated value. Therefore, a speed controller is used to regulate the rotor speed in the high-wind-speed region. In stall-blade wind turbine, the role of the speed controller is important because precise aerodynamic regulation is unavailable. In this study, an effective parameter design method of a PI speed controller is proposed to limit the speed overshoot of a type 4 wind turbine with stall blades even though wind gust occurs. The proposed method considers the efficiency characteristics of the stall blade and the mechanical inertia of the wind turbine rotor. It determines the bandwidth of the speed controller to comply with the speed limit during generator speed overshoot for the worst case of wind gust. The proposed method is verified through intensive simulations with a MATLAB/SIMULINK model and experimental results obtained using a 3 kW MG set of wind turbine simulator.

Coupled Line으로 구성된 작고 넓은 대역폭을 가지는 3-dB Ring Hybrids (Compact and Wideband Coupled-Line 3-dB Ring Hybrids)

  • 안희란;김정준;김범만
    • 한국전자파학회논문지
    • /
    • 제19권8호
    • /
    • pp.862-877
    • /
    • 2008
  • 두 종류의 넓은 대역폭을 갖는 ring hybrids(하나는 coupled line이 포함되어 있고, 다른 하나는 left-handed transmission line을 포함한 ring hybrids)가 비교되었으며, 비교 결과로부터 coupled line을 포함한 ring hybrid가 모든 면에서 우수한 특성을 가짐을 보여줬다. 그러나, coupled line을 포함한 ring hybrid는 -3 dB coupling power를 가질 경우에 한해서만이 perfect matching이 이루어지기 때문에, perfect matching을 갖는 coupled line ring hybrid는 2차원으로 구현하기는 거의 불가능하다. 이 문제를 해결하기 위해서 coupled line을 해석했고, 그 해석 결과로부터 coupling coefficient에 관계없이 어느 경우에도 perfect matching을 이룰 수 있는 설계 식을 유도했다. 이 설계식을 이용하여, transmission line의 길이가 ${\pi}$보다 큰 경우에도 적용될 수 있는 크기를 줄이기 위한 새로운 형태의 transmission line 등가회로를 제시했다. 이 새로운 형태의 transmission line의 등가회로를 이용하면 기존의 ring hybrid의 $3\;{\lambda}/4$의 transmission line을 줄이는 데 사용할 수 있기 때문에 ring hybrid의 크기를 더욱 줄이는데 장점이 될 수 있다. 이 등가회로를 증명하기 위해서, coupling power를 고정하고 또는 transmission line의 길이를 고정하는 2가지 형태의 simulation을 하였으며, 대역폭은 coupled line의 coupling power에 직접적인 상관 관계가 있음을 보였다. 기존의 등가회로와 새로운 형태의 등가회로를 이용하여, 작고 넓은 대역폭을 가지는 ring hybrid를 제시하였다. 새로 제시된 ring hybrid를 이용하여, 기존의 ring hybrid와 비교하였다. 비교 결과로부터, 본 논문에서 제시한 ring hybrid의 전체 ring 둘레가 1/3보다 더 작음에도 불구하고, 대역폭이 훨씬 넓음을 보여줬다. 작고 넓은 대역폭을 가지는 ring hybrid를 측정했으며, 측정 결과는 -2.78 dB, -3.34 dB, -2.8 dB, -3.2 dB의 power division 특성을 보여줬으며, matching과 isolation은 20 % 이상의 대역폭에서 -20 dB보다 좋은 특성을 보여줬다.

한국 산업부문의 에너지성과 지표 이용에 관한 연구 (Investigating the Use of Energy Performance Indicators in Korean Industry Sector)

  • 심홍석;이성주
    • 한국산학기술학회논문지
    • /
    • 제22권3호
    • /
    • pp.707-725
    • /
    • 2021
  • 에너지경영시스템은 생산 중심으로 발전하는 한국의 경제구조에서 에너지경영의 역할을 강조하여 지속 가능한 에너지 절약 및 온실가스 감축에 기여하고 있다. 에너지 성과에 대한 측정 방법론을 이해하는 것은 기업이 성공적인 에너지경영시스템을 구축하는 데 핵심 요소이지만, 적용 방법론, 적용 가능성 및 실제 활용도를 조사하려는 시도는 국내에서 찾아보기 어렵다. 본 연구는 에너지경영시스템에 관한 국제표준인 ISO 50006에서 제안한 4가지 에너지 성과 지표(EnPI)인 ①측정 된 에너지 값, ②측정 된 값 간의 비율, ③ 선형 회귀 모델, ④ 비선형 회귀 모델에 초점을 맞추어 에너지성과 측정에 대한 이해를 심화시키고, 효과적으로 확산시키기 위한 정책과 적정 관리 지표를 제시하는 것을 목표로 한다. 41명의 전문가들의 설문조사를 통해 수집된 데이터를 활용하여, EnPI에 대한 선호도와 산업 분류별, 조직규모, 전문가 유형별로 EnPI의 주요 선책 기준을 분석하였다. 연구 결과에 따르면 가장 선호되는 EnPI는 측정 된 값과 측정 된 에너지 값 사이의 비율이며 EnPI를 선택하는 기준은 사용 편의성이 가장 중요하다고 분석되었다.

플랜트 모델참조를 이용한 병렬형 퍼지제어기 설계 (Design of Parallel Type Fuzzy Controller Using Model Reference Plant)

  • 추연규
    • 제어로봇시스템학회논문지
    • /
    • 제9권5호
    • /
    • pp.379-383
    • /
    • 2003
  • Parallel type fuzzy controller is designed by using a hybrid connected type fuzzy-PID controller and a model reference fuzzy controller. The first controller, consists of a fuzzy-PI and a fuzzy-PD making a hybrid type fuzzy-PID controller, plays a role as firstly reaching stable responses and secondly overcoming disturbance in plants. The second controller, model reference fuzzy controller, plays a role as reaching faster responses than other controllers. We have confirmed that the controller produces rapid and stable responses and overcomes disturbance by using parallel type fuzzy controller in a DC motor application.

A TURÁN-TYPE INEQUALITY FOR ENTIRE FUNCTIONS OF EXPONENTIAL TYPE

  • Shah, Wali Mohammad;Singh, Sooraj
    • Korean Journal of Mathematics
    • /
    • 제30권2호
    • /
    • pp.199-203
    • /
    • 2022
  • Let f(z) be an entire function of exponential type τ such that ║f║ = 1. Also suppose, in addition, that f(z) ≠ 0 for ℑz > 0 and that $h_f(\frac{\pi}{2})=0$. Then, it was proved by Gardner and Govil [Proc. Amer. Math. Soc., 123(1995), 2757-2761] that for y = ℑz ≤ 0 $${\parallel}D_{\zeta}[f]{\parallel}{\leq}\frac{\tau}{2}({\mid}{\zeta}{\mid}+1)$$, where Dζ[f] is referred to as polar derivative of entire function f(z) with respect to ζ. In this paper, we prove an inequality in the opposite direction and thereby obtain some known inequalities concerning polynomials and entire functions of exponential type.