In this study, we described the result of computer simulation which is real time extraction of FECG and FHR using adaptive digital signal processing. And we designed 2 channel cassette interface circuit to save FECG signal.

In this paper, we proposed the time scaling method for the ultrasonic aids for the blind. This system is simplified by using the analog delay line(BBD) for the time scaling of echo signals and the experimental results show the propsed method is superior to the conventional frequency mapping method.

Crosslinked poly(2-hydroxyethylmethacrylate) has been prepared by polymerizing 2-hydroxyethyl methacrylate(HEMA) with crosslinkers such as ehyleng glycol dime- thacrylate(EGDMA), tetraethylene glycol dimethacrylate(TEGDMA), tetraethylene glycol diacrylate(TEGDA), divinyl benzene(DVB), and N, N-methylenebisacry- lamide(MAB) in the presence of initiator $\alpha$ , $\alpha$ -azobisisobutyronitrile at 60。C, The synthesized copolymers were identified by FT-lR spectrophotomether. The swelling properties of the crosslinked copolymers in various solvents such as water, methanol, ethanol, n-propanol, and n-butanol were investigated at different temperatures. The thermal properties of the crosslinked coplymers were also measured by differential scanning calorimetry(DSC) and thermogravimetry(TG)

2-Hydroxyethyl methacrylate(HEMA) was copolymerized with allyltrimethylsilane- (ATMS) and allylt.imethoxysilane(ATMOS) at 70。C in N, N'dimethylformamide- (DMV) using $\alpha$ , $\alpha$'-azobisisobutyronitrile(AIBN). The compositions of unreacted monomers were determined by gas chromatographic analysis. The monomer reactivity ratios were determined by Fireman-Ross, Helen-Tiidus and intersection methods. The average values are as follows : $$r_1(HEMA) : 6.62 $\pm$ 0.07, r_2(ATMS) : 0.07 $\pm$ 0.01 for HEMA-ATMS system.$$ $$r_l(HEMA) : 4.09 $\pm$ 0.14, r_2(ATMOS) : 0.06 $\pm$ 0.01 for HEMA-ATMOS toys tem.$$ The lower rl(HEMA) In the HEMA-ATMOS system as compared to HEMA ATMS system may be contributed to higher relative reactivity of ATMOS toward the poly(HEMA) radical. The compositions of synthesized copolymers were determined from silicon con tents estimated gravimetrically. The thermal stabilities of the copolymers were investigated by thermogravimetry(TG). The enthalpic changes associated with the endothermic transition were evaluated by differential scanning calorimetry(DSC). The swelling properties of the copolymers in water were also investigated.

In estimating the freguency-dependent attenuation coefficient, we analyzed the range-dependent ultrasonic beam and proposed the method of calculating the experimental equation of beam pattern in order to reduce the error on the influence of beam pattern. These experimental equations are divided into the spectral centroid and the spec ural standard deviation slope according to axial propagation length. These are repnesented by the first-order equation in the near field of the beam and the second- order eqLlatlon In the far field. In order to prove the validity of this method, the attenuation coefficients of the non-corrected ease and the corrected case are compared. Using the reflected signal from acryle plate, the attenuation coefficients were estimated by the spectral shift method ann the spectral difference method. The result shows attenuation coeffi talents after correction are better than attenuation coefficients before correction. And this method can be applied In vivo measurement.

This paper designed LOCOMOTION SYSTEM of a mobile robot for the blind guidance and LOCOMOTION COMMAND SYSTEM that gave the moving path to the locomotion system. This system analyzed COMMAND and calculated the speed and direction of the robot. And during locomotion it measured wheel's rotation number for the position and speed control. Also, this system was considered about the 110 interface with host computer and the locomotion method for the blind. In the locomotion experiment the standard speed of robot was 0.4m/sec and the locomotion error was below 5%

본 연구에서는 8-node cubic element로서 3차원 흉부모델을 구성하였고 또한 3차원 정상상태 유한요소법 코드를 FORTRAN을 이용하여 개발하였다. 프로그램의 출력은 각 node의 전위. 각 요소의 전ㄹ. 그리고 Z축방향으로의 각 층에서 총 전류이다. 이 흉부모델을 이용한 임피던스혈량측정법에서의 기초임피던스 ($Z_0$)를 계산하였다. 일반화된 라플라스 방정식을 정전위와 무전속 경계조건을 적용하여 풀었다. 또한, 전극간의 전위차와 $Z_0$의 계산값이 실측치와 근접하였으므로 이 모델이 인체의 흉뷰화 유사함을 확인하였다.

The biological effects for the use of hypertherinla to treat malignant tumors has been well studied and encouraging clinical results have been reported. However, the engineering and technical aspects of hyperthermia for the deepseated tumors has not been satisfactory. We have developed the FF capacitive hyperthermia device(GHT RF8)by cooporation with Yonsei Cancer Center and Green Cross Medical Equipment Corporation. It was composed with 8.10 MHz RF generator, capacitive electrode, matching system, cooling system, temperature measuring thermocouples and control PC computer. We have measured the temperature and thermal distribution in agar phantom, animals and human tumors.

The power spectrum of background EEG is estimated by the Plsarenko Harmonic Decomposition with the stochastic process whlch consists of the nonhamonic sinus Bid and the white nosie. The estimation results are examined and compared with the results from the maximum entropy spectral extimation, and the optimal order of this from the maximum entropy spectral extimation, and the optimal order of this model can be determined from the eigen value's fluctuation of autocorrelation of background EEG. From the comparing results, this method is possible to estimate the power spectrum of background EEG.

With the conventional CW Doppler velocity meter, bl-directional velocities cannot be separated. The new CW Doppler system uses quadrature detection and phase rotation to produce simultaneous independent audio and velocity signals for forward and reverse blood flow direction, is fabricated. Specially, this system shows that phase rotation method for flow direction separation provides easy and satisfactory feature. From in vivo blood flow measurement, we can easily differentiate typical artery flow from vein flow, and measure both velocity characteristics qualitatively.

An image feature extraction method for the low contrast fluoresceln angiogram in dlabetes was studied. To obtain effective image segmentation, an adaptive local difference image is generated and relaxation process are applied to this difference Image. By the use of distance transformed data with segmented image, shape and location of feature regions were obtained. It was shown that the location and shape descriptions of Impaired blood vessel networks and retinal regions are can he utilized for the diagnosis of diabetes and other disease.

In order to evaluate the artificial skin for burn would covering materials, copoly(N. carbobenzoxy-L-Iysine-L-leucine)s were prepared by Ipolymerization of N - carbobenzoxy-L- I sine anhydride and L-leucine anhydride in homogeneous solvents using triethylamine as an initiator. The synthetic polypeptides and the oxter type polyurethane(PV)of medical grade were used as the sheet type membranes were prepared ; monolayer membrances were composed of only the polypeptides, bilayer membranes and blend membranes were controlled by composition of the polypeptides and PU. Test of the swelling degree, mechanical tensile strength, elongation, oxygen permeability, water-vapor loss and In vitro degradation treated by pretense TV of samples of artificial skin were measured by adequate methods so as to mechanical, physincal characterization and biodegradation. As a result, all the values of samples were found to be similar to desired value of skin which was nature. The Artificial skin based on polypeptides can be considered as ideal burn wound covering materials.