Despite efforts to reduce unexpected accidents at confined construction sites, choking accidents continue to occur. Because of the poorly ventilated atmosphere, particularly in long, confined underground spaces, workers are subject to dangerous working conditions despite the use of artificial ventilation. Moreover, the traditional monitoring methods of using portable gas detectors place safety inspectors in direct contact with hazardous conditions. In this study, a long-range (LoRa)-based wireless safety monitoring system that features the network organization, fault-tolerant, power management, and a graphical user interface (GUI) was developed for underground construction sites. The LoRa wireless data communication system was adopted to detect hazardous gases and oxygen deficiency within a confined underground space with adjustable communication range and low power consumption. Fault tolerance based on the mapping information of the entire wireless sensor network was particularly implemented to ensure the reliable operation of the monitoring system. Moreover, a sleep mode was implemented for the efficient power management. The GUI was also developed to control the entire safety-monitoring system and to manage the measured data. The developed safety-monitoring system was validated in an indoor testing and at two full-scale water pipeline construction sites.

The viscosity of a shear-thickening fluid damper (STFD) can increase dramatically when the STFD undergoes high-rate of excitation. Therefore, accurate numerical modelling of the STFD has been considered difficult due to this distinct feature. This study aims to develop a numerical model to accurately simulate the response of the STFD. First, a STFD is designed, fabricated, and installed in the laboratory. Then, performance tests are conducted in which sine waves with nine frequencies at three amplitude levels are adopted as the displacement excitations to the STFD. A novel numerical model which contains two parameter sets of the discrete Bouc-Wen model as well as two parameters for transiting the two parameter sets. Therefore, a total number of eighteen parameters need to be identified in the damper model. The symbiotic organisms search is applied to optimize the parameters. Numerical simulation results demonstrate that the proposed STFD model with transit parameter sets outperforms the conventional discrete Bouc-Wen model. The proposed STFD model can be applied to analyses of structures in which STFDs are installed in the future.

In this paper, a hybrid vibration-impedance-based damage monitoring approach is experimentally evaluated for prestressed concrete (PSC) structures with local strand breakage. Firstly, the hybrid monitoring scheme is designed to alert damage occurrence from changes in vibration characteristics and to localize strand breakage from changes in impedance signatures. Secondly, a full-scale PSC anchorage is experimented to measure global vibration responses and local impedance responses under a sequence of simulated strand-breakage events. Finally, the measured data are analyzed using the hybrid monitoring framework. The change of structural condition (i.e., damage extent) induced by the local strand breakage is estimated by changes in a few natural frequencies obtained from a few accelerometers in the structure. The damaged strand is locally identified by tomography analysis of impedance features measured via an array of PZT (lead-zirconate-titanate) sensors mounted on the anchorage. Experimental results demonstrate that the strand breakage in the PSC structure can be accurately assessed by using the combined vibration and impedance features.

In this study, a new type of isolation bearing is proposed by combining S-shaped steel plate dampers (SSDs) with a spherical steel bearing, and the seismic control effect of a five-span standard high-speed railway bridge is investigated. The advantages of the proposed S-shaped steel damping friction bearing (SSDFB) are that it cannot only lengthen the structural periods, dissipate the seismic energy, but also prevent bridge unseating due to the restraint effectiveness of SSDs in the large relative displacements between the girders and piers. This study first presents a detailed description and working principle of the SSDFB. Then, mechanical modeling of the SSDFB was derived to fundamentally define its cyclic behavior and obtain key mechanical parameters. The numerical model of the SSDFB's critical component SSD was verified by comparing it with the experimental results. After that, parameter studies of the dimensions and number of SSDs, the friction coefficient, and the gap length of the SSDFBs were conducted. Finally, the longitudinal seismic responses of the bridge with SSDFBs were compared with the bridge with spherical bearing and spherical bearing with strengthened shear keys. The results showed that the SSDFB can not only significantly mitigate the shear force responses and residual displacement in bridge substructures but also can effectively reduce girder displacement and prevent bridge unseating, at a cost of inelastic deformation of the SSDs, which is easy to replace. In conclusion, the SSDFB is expected to be a cost-effective option with both multi-stage energy dissipation and restraint capacity, making it particularly suitable for seismic isolation application to high-speed railway bridges.

Three-dimensional (3D) models have become crucial for improving civil infrastructure analysis, and they can be used for various purposes such as damage detection, risk estimation, resolving potential safety issues, alarm detection, and structural health monitoring. 3D point cloud data is used not only to make visual models but also to analyze the states of structures and to monitor them using semantic data. This study proposes automating the generation of high-quality 3D point cloud data and removing noise using deep learning algorithms. In this study, large-format aerial images of civilian infrastructure, such as cut slopes and dams, which were captured by drones, were used to develop a workflow for automatically generating a 3D point cloud model. Through image cropping, downscaling/upscaling, semantic segmentation, generation of segmentation masks, and implementation of region extraction algorithms, the generation of the point cloud was automated. Compared with the method wherein the point cloud model is generated from raw images, our method could effectively improve the quality of the model, remove noise, and reduce the processing time. The results showed that the size of the 3D point cloud model created using the proposed method was significantly reduced; the number of points was reduced by 20-50%, and distant points were recognized as noise. This method can be applied to the automatic generation of high-quality 3D point cloud models of civil infrastructures using aerial imagery.

During the long-time service of a bolt, its preload may suffer slight perturbations or significant reductions. It is a dilemma to monitor preload changes at high resolution and full scale. Approaches for bolt preload monitoring with multi-resolution should be developed. In this paper, a simple and effective multi-resolution bolt preload monitoring approach using ultrasonic guided waves (UGW) is proposed. A linear relationship between the time-of-flight (TOF) variation of multi-reflected waves and preload is derived to theoretically reveal the multi-resolution properties of UGW. The variations of TOF before and after the slight preload perturbations are extracted by using a global evaluation method. Experimental results show that the signal-to-noise ratio (SNR) of the 1^st, 2^nd, and 3^rd-reflected UGWs is larger than 20 dB. The resolution of the 2^nd-reflected UGW is higher than that of the 1^st-reflected UGW and lower than that of the 3^rd-reflected UGW. The ultimate detectable resolutions of bolt preload (DRBP) of the 1^st and 3^th-reflected UGWs are 0.9% and 0.5%, respectively. By using the 1^st and 3^th-reflected guided waves, the bolt looseness with different degrees can be monitored simultaneously.

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.

The optimal design of structural composite materials is a research topic that attracts the attention of lots researchers. For many more thirty years, there has been increasing interest in the applications in all kinds of topics, which means taking advantage of fuzzy set theory, fuzzy analysis, and fuzzy control for designing high-performance and efficient structural systems is a fundamental concern for engineers, and many applications require the use of a systems approach to combine structural and active control systems. Therefore, an intelligent method can be designed based on the mitigation method, and by establishing the stable of the closed-loop fuzzy mitigation system, the behavior of the closed-loop fuzzy mitigation system can be accurately predicted. In this article, the intelligent algorithm and optimum design of fuzzy theory for structural control has been provided and demonstrated effective and efficient in practical engineering issues.

Through the examination of literatures, electronic commerce is a subject which is accepted in enterprises to define e-commerce adoption, trends, and issues that are assisting and obstructing its efficacy. E-commerce offers numerous advantages to consumer satisfaction in any place and helps the company to get a competitive benefit over its competitors. The Internet has expanded the scope of business. Many business information is available by the global network that supports information gathering between organizations, businesses and their clients, while various divisions of a business is increasing at an exponential rate. Meanwhile, there are a few barriers to proper e-commerce usage and adoption, such as reliable internet connections, poor e-commerce supporting infrastructures, logistics systems presenting socio-regulatory and poor transportation barriers and demonstrating the significant improvement of e-commerce reliable and affordable Internet provisions, i.e., Internet cost, intensity, and reasonable level of e-readiness. The operational and strategic significance of information-based virtual value chains for all organizations cannot be emphasized. As a consequence, this study confirms worldwide market elements of e-commerce, such as its issues, benefits, relevance, scope, facilitators and projects prospective obstacles in a developing economy.