The recent results concerning the synthesis and application of spiroxazine dyes have been summerized., The absorption bands of usual spiroxazine dyes are changed from colorless to colored from by irradiation of ultraviolet ray. This mechanism is derived from the cleavage of oxazine ring. Such properties are dependent on its chemical structure and surrounded matrix of spiroxazine dyes. the chemical structure of this dye is similar to the well known spriopyran. But spiroxazine dyes have noticed recently, because of excellent high light-sensitivity and superior fatigue-resistant property. This dye are already applied as photochromic lens, cloths and UV light checker.

This paper proposed correction tone density eq. and dot area eq. for perdict tone reproduction when dot gain is constant, and these are based on Yule & Nielson`s tone density equation. The experimental results show that proposed coreaction tone density eq. and dot area eq. are useful and valid for perdict tone reproduction of a half-tone image.

The negative pressure distribution curves of the exit of printing nip were obtained by the transducer type tackometer. As the results, found that the elasticity of rubber rollers and pastic viscosity affect to the maximum negative and positive pressure but, the gap of the printing nip didn`t affects to the tack values of ink and ink film thickness. Ink spritting is accured by negative pressure and inks viscoelasticity. And the tack value is affect by properties of the vehicle component in the inks.

Direct electrostatic coating method is simple, low cost and environmentally useful method. We are investigated on the coating of carrier transfer polymer layer on the carrier generate inorganic pigment layer using direct electrostatic coating method. The sample was obtained electrostatic deposite layer by fusing and calendering on the copper phthalocyanine. we could be found several polymer thin film shows good bond properties between film and pigment layer.

The character of standing box printing reguires a rich representation on a light and a shade of color and cause the modern photographs to be abundant of the ink and also show the continuity of which any other printing is incapable because of its profound gradation.The clear printing in gravure can be said to be due to the good transfer of the ink-the completion of the transference of the ink into the stencil paper and the clear transference of the printing tone.The most inportant matter is the distance between the printing press and the doctor line. It is the matter of the structure and arrangement because of giving the most affect on the dryness of the ink in the cell.The glue of the ink in gravure changes by the kinds of the dye and the cellusolve used.

In screen printing process, printing are streching screen meshs of an angle of 45deg. This angle need much more screen mesh`s quantity of 15% than 22.5deg. To seach mesh angles have affect on reproducting fine line pattern, we modeled the expecting image according to screen angles change and reconfirmed it`s useful and valid from experimentation.

The charater of standing box printing reguires a rich representation in a light and a shade of color and caues the modern photographs to be abundant of the ink and also shows the continuity of which any other printing is incapable because of its profound gradation. The clear printing in gravure can be said to be due to the good transfer of the ink - the completion of the transference of the ink into the stencil paper and the clear transference of the printing tone. The most inportant matter is the distance between the printing press and the doctor line. It is the matter of the structure and arrangement because of giving the most affect on the dryness of the ink in the cell. The glue of the ink in gravure changes by the kinds of the dye and the cellusolve used. To make the printing somoothly progressive from the high glue of the ink to the low glue of the ink will have to be used, which will be possible to choose the ester.ose the ester.