This paper proposes a method for constructing the virtual characters adopting the personal body types for the clothing coordination. At first, the method produces the 38 kinds of the Korean 3D body models considering sex, ages and body types, and constructs model DB. We select a model similar to the personal body size from DB and deform the selected model according to body size. The method deforms the model linearly for height 12 items, width 6 items, depth 5 items and round 13 items, and constructs the personal character fitted to the personal body size. The preprocess for model deformation consists of grouping for body part and establishing the feature points. Linear deformation for each group leads us to easy construction of the virtual personal characters. This method has two advantages as follows: 1. Large reduction of man power, cost and time for DB construction of the body 3D models, since the preprocess permits us to effectively use the various body models whose geometrical structures are different, 2 Suitability to Web-based clothing coordination, since the body deformation method is simple and its speed is very high.

The purposes of this study were to analyze the new lifestyle of female consumer of age in the range of 19∼35 and to investigate their clothing-purchasing behavior and preferred sensation by lifestyle group. The questionnaire survey was carried out on 402 subjects with 31 lifestyle questions, 32 questions of clothing purchasing behavior and 18 questions of preferred sensation. Through factor, cluster analysis and anova using SPSS, we found that the female consumers were composed of 6 lifestyle groups; Traditional Appearance Pursuit(19.4%), Personal Life Pursuit(15.7%), Outer Beauty Pursuit(15.9％), Active Practical Pursuit(11.4%), Digital Leisure Pursuit(13.4%) and Unconcern(21.6%). The location of 6 lifestyle group were visualized in 2-D as the horizontal axis of 'Internal↔Appearance' and the vertical axis of 'Personal↔Collective'. Six groups by lifestyle showed different clothing-purchasing behavior and preferred sensations, and had different socio statistical parameters, such as age, income, job and education.

This study was carried out in the purpose of proposing internet marketing strategy which can make conversion rate higher through analysis of internet shopping behavior types. This study was executed in two stages; qualitative study, quantitative study. In the qualitative study, internet shopping behavior types were investigated through the In-depth interview and direct observation, and then in the quantitative study, differences of internet shopping behavior types according to consumer characteristics, product properties and shopping-mall types were examined. For qualitative study, 30 samples by focus sampling were inquired and for quantitative study, 334 data were collected through web survey. The results of this study are as follows: First, 7 Internet shopping behavior types of apparel were found through the qualitative study: cautious purchase by price comparison, searching purchase, special low price purchase, impulse purchase, prepurchase deliberation, information accumulation, recreation-oriented. Second, in relation to consumer characteristics, consumers that have many internet purchase experiences showed goal-directed behavior more and female did more special low price purchase behavior and impulse purchase behavior than male. Third, according to product properties, high price product led more cautious purchase by price comparison & prepurchase deliberation behavior and fashionable product led more information-searching behavior. In the case of low price and fashionable products, impulse purchase behaviors were showed more. Forth, according to Internet shopping mall types, category killer shopping mall visitors showed information search behavior, recreation-oriented behavior more.

This study focusses pattern draft and grading of jeans for women in their 20s, who consume jeans the most. Pattern was drafted based on existing patterns collected from companies. It is different from the existing educational patterns. It suggests new sizing system for twenties referring to sizes used companies and grading rule and method. he results were as follows; 1. Companies manufacture 2-8 sizes and they referred to the Korean Industrial Standards, KS K 0051, for their sizing system. 2. Drawing method for Pattern of the study had following measurements for each part: in the case of waist circumference, front part was W/4+1.5cm, back part was W14+2cm, front hip circumference was H/4-1.5cm, crotch line was the crotch length (practical measurement), hip circumference was (upper crotch line length)/5+0.5cm, front crotch part was 2.7cm, back crotch part was W/5+2.7cm, knee height was (the length of leg)/2+6cm and the circumference of knee and the tip of pants were 40cm. Through the wearing test on the subject of twenties, researched pattern received higher ratings, especially in appearance than the existing pattern. 3. 5 sizes system was made referred to the sizing system of companies and National Anthropometric Survey of Korean in 1997 Grading rule for 12 grading points of front part and 13 grading points of back part was suggested. Results of wearing test on the graded patterns showed high ratings similar to standard size.

This study was intended to identify customer's response to CRM of fashion business.488 questionnaires were distributed to male and female respondents aged 16 to 55, and then analyzed by descriptive statistics, oneway-ANOVA, chi-square test, and factor analysis. As a result of customer information management, respondents evaluated taste, interest and demographic informations as most valuable. But they did not value personal and credit information. For CRM concept, 4 factors were determined: continuous care and suggestion, particular service to important customer, customer management program development, and customer convenience consideration. For CRM activity, 3 factors were determined: customization, information offering, and programmed service strategies. Respondents were having positive attitude toward CRM concept and activity of fashion business. Among customer loyalty programs, they affected by immediate and direct programs most. The preference of customer contact methods was differentiated by sex and age groups. Males and teenagers preferred e-mail, and females preferred catalog and telephone connection.

This study presents comparisons between 286 male and female in their 60s in terms of the perception of their body shape. The results were as follows: 1. In the perception of male and female elders in their sixties on their body shape, a larger number of female elders considered that they were fat, short and heavy than male elder did. With regard to satisfaction with the body, male elders appeared to be more satisfied with their bodies than female elders, and both male and female elders were dissatisfied most with their abdomen girth. 2. The satisfaction of male and female elders in their sixties with their body shape appeared to be influenced more by their perception than their measured sizes. They were more satisfied with their body shape when they perceived that they had small girths, they were tall and they had long legs. In addition, female elders were more satisfied with their body shape when they perceived that their thigh girth and ankle girth were large. 3. As for perception on normal body types and fat body types and satisfaction, male elders' satisfaction with their body shape appeared to be less influenced by their body types than female elders'.

The purpose of this study was to identify the current situation of textiles and apparel firms in the overseas markets and to examine the relationship between firms' characteristic(i.e., sales volume) and international marketing strategies. A random sample of 311 textiles and apparel firms were selected. The survey design method was used to test conceptual framework. Adjusted response rate was 33.4%(n=115). Descriptive analysis (i.e., frequency, percent) and $\chi$$^2$-test were used for data analysis. About the current situation of textiles and apparel firms in the overseas markets, the motivation for international market entry was highly found to expand their operation from domestic to international market, and most firms were found to be involved with OEMs(Original Equipment Manufacturers) as an entry mode for international market. China and US market were the most popular market among Korean textiles and apparel firms. Product differentiation strategy, pricing strategy based on manufacturing cost and buyer's offering price, place strategy using foreign buyers and participating a few international exhibition were frequently used among Korean textiles and apparel firms for international marketing. Among textile firms, sales volume was related to product strategies(product development), price strategy(buyer's offer) and place strategy(channel). Among apparel firms, product strategy(product labeling), price strategy(price satisfaction). The findings of this can be used when Korean textiles and apparel firms do strategic planning and evaluate the international marketing strategies. Also information and results of this study may assist policy makers to develop better ideas and strategies for textiles and apparel industry.

Following a treatment with edible oils and/or washing, the tensile properties of vulcanized rubber were measured to assess the effect of the sorbed edible oil. Rubber soiled with soybean oil, after 8 weeks storage in a 30$^{\circ}C$ incubator, retained 61% of its original strength, and rubber soiled and washed retained the 73%. The strength of the rubber soiled with oil decreased remarkably during the first 2 weeks. After repeating this soiling and/or washing 7 times, the soiled rubber had only 16％ of its original strength, the rubber soiled and washed had 45%. In all cases, breaking elongations were not decreased as much as tensile strengths; therefore , more of the elasticity of the rubber remained than did the strength. From these results it is concluded that washing after soiling with oils is very helpful in maintaining the strength of rubber. In this study, three different surfactant solutions, AS, AE and AS/AE, were used. In the AS solution, the contact angle of the soybean oil was greater and the work of the detergency was the smaller than in either the AE or the AS/AE solution, the loss of the strength of the rubber washed in AS solution did not decrease significantly. These results suggest that rolling-up, emulsification and solubilization also participate in the removal of oil from rubber.

The objectives of this study were to classify the contents of lifestyle of adolescents, to investigate the relationships between lifestyles and appearance behavior, and to examine how appearance behavior was influenced by lifestyles and demographic variables of male and female adolescents. The method of the study was survey research by using questionnaires. Subjects were 414 high school students in Seoul: 176 were males and 238 females. Five dimensions of lifestyles were derived by factor analysis: ‘digital orientation', 'positive activity', 'achievement orientation', 'material orientation', and ‘frugality'. Digital orientation had, in case of the male, a positive relation with body-modification need, a positive one with appearance interest in female. Positive activity had positive relations with appearance interest and body satisfaction in both male and female. Appearance interest, weight interest, and body-modification need levels were significantly higher for female than for male, whereas body satisfaction were higher for male than for female. Appearance interest of male was influenced by positive activities and social stratification. Appearance interest of female was influenced by material orientation and positive activity. Body-modification need of male was influenced by digital orientation and frugality(-), that of female only influenced by material orientation. Fashion and brand preference of male was influenced by material orientation, frugality(-), and social stratification. In case of the female, fashion was influenced by positive activity, material orientation and frugality(-), brand preference influenced by material orientation and positive activity.

This study is designed for improving wearing styles for middle-aged women who are in unsatisfactory body types and also providing the basic information about the suitable clothing designs for them. This study focuses on what kinds of body types they perceive, what the differences are between the perception of their body types and the real ones, and how the actual clothing styles can be affected by those perceived body types. This study is based on the survey of the perception of body types, the clothing styles, and the satisfaction level of body cathexis, while measuring body size of each person responded. The data were analyzed by Mean, ANOVA, Duncan-test of SPSS Win. (ver 10.1)program. The results are as follows: 1. The perception of their body types can be categorized into three clusters, the obesity, the arm & leg obesity, the slender. 2. By and large, Middle-aged women perceive their body types exactly what they we. However, they show a relatively subjective view on the upper arm girth, ankle girth, and arm length 3. The abdomen is at the lowest satisfactory part in body cathexis for the entire groups responded, and there are some differences among the perception of their body types in whole body silhouette and trunk. 4. Middle-aged women who perceive themselves as a bit slender show a tendency of having tight and revealing clothing styles, while the obese who perceived themselves wouldn't take them as appropriate dresses.

The purpose of this study was to investigate relationships among partnership variables and sourcing performance. Partnership variables were included as: contract conditions, information sharing, communication, conflict, job understanding, monitoring, culture understanding, trust and commitment. Sourcing performance included perceived benefits and sourcing satisfaction. The survey research design was employed with the structured questionnaire. A sample of 104 Korean apparel firms' managers participated in this survey. Apparel firms selected for this study were casual, sports, children's wear firms doing actively international sourcing. For the data analysis, descriptive statistics (i.e., frequency, percent), factor analysis, correlation, and multiple regression analysis were used. Information sharing and job understanding were positively related with trust. That is to say, the better information sharing and the better job understanding apparel firms had higher scores of trust than others. Contract conditions, communication, conflict, and culture understanding were known as predictions of commitment to international outsourcing. The more trust firms had with their vendors, the more commitment the firms had in the international sourcing. This result showed that trust is the essential factor of commitment. Trust and commitment were significantly related with outsourcing performance (i.e., perceived benefits, satisfaction of the international sourcing). Partnership information of international sourcing assembled in the review of literature and the results from this empirical study may assist the domestic apparel firms to make better decision in the adoption process of international sourcing.

The purpose of this study is to investigate surface color change and effects of mordants on the K/S values of silk and wool fabrics dyed with Lac extract, according to the mordanting methods and conditions such as temperature, concentration and time of the mordanting bath. The results were as follow; 1 K/S values of the silk and wool fabrics according to the temperature of the mordanting bath were shown a slight decline beyond 40$^{\circ}C$. 2. Surface color of the silk changed from red to reddish purple and that of the wool showed red tone when mordanted with Aluminum postassium sulfate, Copper acetate and Copper (II) sulfate regardless of the mordanting conditions. 3. The light and dry cleaning fastness of silk and wool fabrics dyed with Lac extract according to the mordanting methods were very good.

Kenaf has been cultivated in Jeju Island. After being harvested at 105 DAP(day after planting) and separated from kenaf stalks , decorticated kenaf basts were treated with different concentration/temperature/time combinations in order to do chemical rotting. The following fiber properties were compared; rotting effects, colors, crystallinity, molecular structures, dyeabilities, and non-cellulose contents such as pectins, lignins, & hemicellulose. The best results of chemical rotting were obtained from the specimens treated with low concentration/ low temperature/short time. Their colors were bright yellow. The lumens of specimens diminished with the affect of NaOH. The structures of chemically rotted kenaf fibers were cellulose 1. The degree of crystallinity of chemically retted kenaf fibers were very high. Non-cellulose content, especially hemicellulose, was low in the specimens treated with the high NaOH concentration. Dyeabilities of kenaf fibers were higher among the specimens without the non-cellulose content than those with the non-cellulose content.

The effects of changing aqueous solution properties by nonionic surfactants on wetting behavior and water retention properies of hydrophobic PET (polyethylene terephthalate) fabric were reported. The aqueous solution properties were diversified by mixing and diluting two nonionic surfactants, i.e., sorbitan monolaurate (Span 20) and polyoxyethylene(20) sorbitan monolaurate (Tween 20). The surface wetting properties ($cos{\theta}$) of PET fabric were greatly improved by adding $10^{-1}g/dl$ Tween 20 and further improved by mixing Span 20 to the system. The water retention properties (W) of PET fabric were also greatly increased by addition of $10^{-1}g/dl$ Tween 20. In diluted surfactant systems, the $cos{\theta}'s$ were increased with decreasing surface tension of aqueous liquids. The ratios of aqueous liquid retained in the pore structure to liquid retention capacity (W/H) were also increased with decreasing surface tension, however, W/H values were dramatically increased right after critical micelle concentration (cmc). The existence of micelles was important for the retention of aqueous liquids in the fabric. The critical surface tension of PET fabric used was found to be 28.7dyne/cm.

This study is intended to examine the current situation and the problems of the "worksheets, regarding various factors that exert influences onto the quality-risk management, which is one of the most significant factors specifying an apparel product. This paper advances according to the following sequences: 1. Literature survey 2. Field research on actual "apparel vendors" and production factories 3. Investigating the requirements relating to the worksheet 4. Developing standard format of the worksheet 5. Effectiveness analysis on the standard worksheet 6. Proposal of an intelligent model applying standard worksheet system. This study is performed with the following research methods; those are questionnaire surveys, statistical analysis, interviews, collecting & analyzing worksheets, product sample quality experiment, functional analysis of the system, and materialization of the prototype system. The significance of this research is that it suggests the possible effective use of worksheet, which reflects the customers' needs in terms of the product quality, at the stage of the product planning process. Despite its importance, the current work structure does not visibly reflect these components. Therefore, with the result of this research, it is considered that the worksheet systems will meet more useful improvements in risk management process. The limitations of this research are as follows. Although it is evident that the standard worksheets bring effective results in quality improvements of products, considerations must be made onto some additional payoffs arising from the additional cost of necessary labor forces with expert knowledge and cost of the effort and time inputting correct information for running the system.

Microcapsules were prepared by complex coacervation between gelatin and gum arabic. The object of this work is evaluation of the effect of jelly strength, hardening agent on the particle size distribution, surface morphology and DSC. It was found that the 300bloom jelly strength caused microcapsules' size larger. When the amount of hardening agent increased, the particle mean diameter was larger. The amount of hardening agent was determined to be 10m1 for getting suitable size to finish the fabric.