In order to computerize the sight reduction process completely, the coordinates of celestial bodies have to be calculated. The author calculates the equtorial coordinates of the sun and stars using formulae by computer programming. And they are compared with data from an nautical almanac. Generally, data based on formulae is slightly less accurate than those derived from an nautical almanac. In the case of calculating coordinates of the sun, maximum error of GHA is $0{'\\.}2$, and that of declination is $0{'\\.}1$.

The purpsoe of automatic steering system is to keep the ship's course stable with the minimum course error and rudder angle, and there have been a number of studies as to the optimal design and adjustment of the autopilot. Recently, modern control theories are being used widely in analyzing and designing the system. When a ship is at sea, autopilot installed on the ship plays an important role, particularly in the respect of economic aspects, that is, when the design and the adjustment of adjustable parameters are not conducted perfectly, the amount of loss in energy and the extension of sailing distance become large. Therefore the optimal design and adjustment of a autopilot are very important. Though P.I.D type autopilots are widely spread and generally used in modern ships, the suitability and the adjusting method are not clarified. In this paper the authors considered the stabilaity and the economical efficiency of the P.I.D. type autopilot and investigated various facts which should be considered at the time of designing and using the P.I.D. type autopilot through the digital computer simulation.

The transportation productivity is the throughput of utility per locations of resources and is able to be brought forth by using transportation mode. Therefore, Oil energy is necessary for using the transportation mode that is mainly consisted of four parts trucks, railroad, ship and aircraft, and Oil quantity used for such modes is not respectively same. Noticing Such a Point, the purpsoe of this paper is to reaserch the transportation mode of convertable cargoes and to minimize energy consumption quantity by adopting such a mode. We must ttend to Energy-Intensity, Transportation, Distance and cargo quantity for selecting the transport mode to energy consumption and the minimization of transportation energy consumption is concluded in the next LP Problem. As above mentioned, we can find the solution of Xij by the LP when Xij is transportation cargo per routes, and fullfil the minimization of Energy Consumption.

As a circular cylinder has a comparatively simple shape and becomes a basic problem for flows around other various shapes of bodies, the problem of two-dimensional viscous flow around the circular cylinder has been investigated, both theoretically and experimentally. But not a few problems are left unsolved. It is well known that the calculations are successfully made with the approximations of Stokes or Oseen for very low Reynolds numbers, but as Reynolds number is increased, Oseen's approximations as well as Stokes's ones become more and more remote from the exact solution of the Navier-Stokes equations. Therefore, in this paper, the authors transform the Navier-Stokes equations into the finite difference equations in the steady two-dimensional viscous flow at Reynolds number up to 45, and then solve the solution of the Navier-Stokes equations numerically. Also, the authors examine the accuracy of the solution by means of flow visualization with aluminum powder. The main results are as follows; (1) The critical Reynolds number at which twin vortices begin to form in the rear of the circular cylinder is found to be 6 in the experiment and 4 in the numerical solution. (2) As Reynolds number is increased, it is proved that the ratio of the length of the twin vortices to the diameter is grown almost linearly, both experimentally and numerically. (3) Separation angle is also increased according to reynolds number. But it is found that it would converge into 101.3 degrees, both experimentally and numerically.

According to the report prepared by Legl Committee of IMO, 1978, since the disaster of motor tanker Amoco Cadiz carrying approximate 220, 000 tons of crude oil was wrecked on the coast of France and damaged the largest oil pollution accident in shipping history, Legal Committee of IMO has studied and discussed a new Salvage Convention with assistance of CMI. CMI has prepared a new draft convention under the chairmanship of professor Erling Chr. Selvig and adopted it as a report of CMI to IMO in the 32 Internaltional Conference of CMI, Montreal, May, 1981. This paper has been written to study comparatively andinterprete the questions and/or considerations of the new draft convention by the delegates participated in the Legal Committee of IMO in particular on the private legal view of it. This Salvage Convention Draft has not yet been deliberated thoroughly to agreed the revisiion of the 1910 Convention in accordance with CMI Report 1981 until session 54, March 1985. Therefore this paper has been prepared in the light of the comments made at the Legal Committee in order to interpret the legal questions and contents of the new draft.