By using the boundary element method, the cahracterization and the circuit modelling of the coplanar waveguide (CPW) discontinuities are performed bvia quasi-static approximation. The capacitive equivalent circuits are obtained by developing the 3-D boundary element method with collocation method. On the triangular patch, the numerical scheme employed the linear basis functions and the analytic solutions of the integrals on the singular points. The capacitive discontinuities of gaps, end-gaps, and open-ends are characterized and the results compared with the conductor backed coplanar waveguides.

For the circuit modeling of th ecoplanar waveguide (CPW) discontinuities, th eequivalent inductance is analyzed via the 3-dimensional boundary element method. The proposed method utilizes the magnetic scalar potential to obtain the magnetic flux passing sthrough the air-dielectric interfaces of the coplanar waveguide. The boundary integral is simplified by use fo the symmetry when the substrate is composed of the nonmagnetic material. In the numerical analysis, linear basis function and the collocationscheme are employed. The short-end and the step discontinuities are cahracterized through the calculations of the equivalent inductance andd the capacitance. The present method avoids the usual vector formulation and is quite advantageous in the quasi-staic characterization of the CPW disconditnuities.

An optimum parasitic inductance is observed for maximizing the modulation bandwidth of the multiple quantum well (MQW) electro-absorption optical modulator. For 1.1 pF device cpaacitance of the current MQW optical modulator, the optimum parasitic inductances for maximum bandwidth are calculated for different terminating resistors. In ase of 50.ohm. terminating resistor, the 3-dB modulation bandwidth can be increased 45% wider by using the optimum parasitic inductance than nothing parasitic inductance. This calculated optimum inductance can be practically implemented, since the parasitic inductance of bondwires can be accurately analyzed using the method of moments (MoM) and controlled by changing the length and shpae of bondwires.

In this paper, a new structure for a dC plasma display pane(PDP) with a wall-catode and a wall-auxilizry anode has been suggested. The wall-cathode with a sufficient discharge area maximizes the discharge volume. The auxiliary anode surrounding the discharge region makes the effective control of the charged particles possible. We have investigated the cahracteristics of the new cell structure with a 2-dimensional computer simulation and a micro gap discharge system, and compared experimentally with those of previous cell structure. The new cell structure with the wall-cathode and auxiliary wall-anode turned out to have improved luminance, discharge forming time and sustain voltage.

Tungsten poycide has studied gate oxide reliability and dielectric strength charactristics as the composition of gate electrode which applied submicron on CMOS and MOS device for optimizing gate electrode resistivity. The gate oxide reliability has been tested using the TDDB(time dependent dielectric breakdwon) and SCTDDB (stepped current TDDB) and corelation between polysilicon and WSi$_{2}$ layer. iN the case of high intrinsic reliability and good breakdown chracteristics on polysilicon, confirmed that tungsten polycide layer is a better reliabilify properities than polysilicon layer. Also, hole trap is detected on the polysilicon structure meanwhile electron trap is detected on polycide structure. In the case of electron trap, the WSi$_{2}$ layer is larger interface trap genration than polysilicon on large POCL$_{3}$ doping time and high POCL$_{3}$ doping temperature condition. WSi$_{2}$ layer's leakage current is less than 1 order and dielectric strength is a larger than 2MV/cm.

TiO$_{2}$ tin films have been grown by MOCVD and their cahracteristics of crystallization and microstructures ahve been invetigated. Envelope mehtods are applied to the analysis of the transmission spectra to obtain the optical constants such as refractive indices and extinction coefficients for the TiO$_{2}$ thin films. The envelope methods are proved to be accurate by simulatin gthe transmission spectra. TiO$_{2}$ thin films start to crystallize at 350.deg.C and then crystallize fully into anatase phase at 400.deg.C or higher temperatures. Activation energies are obtained by plotting the deposition rate with varying the substrate temperature. It is 17.8 kcal/mol for the reaction limited regions. The refractive index and the extinction coefficient of the TiO$_{2}$ thin film at .gamma.=632.8 nm increases from 2.19 to 2.32 and decreases from 0.021 to 0.007, respectively, as the substrate temperature increases from 400 to 600.deg. C.

The wavelengt lockin gsystem of the optical fabry-perot filter theoretially derived and experimentally realized by using the ithering method in order to compensate the laser wavelength drift increasing the BER of the WDM system. The deviation between the laser wavelength and the optical filter center wavelength is compensated by applying a suitable voltage to the PZT. Accordingly, the laser wavelength selected by the fabry-perot filter always maintains the condition of maximum transmission powr. A wavelength locking system has been demonstrated using a fiber fabry-perot filter with a free spectral range of 80nm and an FWH of 1nm. The voltages of the sine wave generated for dithering was 20mV and 10mV, the frequency was 2kHz and center wavelength of the tunable laser was 1550nm. In this paper, the locking system have 20ms of locking time and 2nm of locking range.

In this paper, SA-multiplexed filter is designed using SA (simulated ananealing) to recognize music notation patterns varying in size, shape, position and having considerably many similar shapes for optical pattern recognition system. This filter has correlation resutls at wanted location and can identify same class, classify similar class for scale-varianted or rotation-varianted music notation patterns havng learning process. Also, the optimum filter is oriented to analyze on the similar discrimination at acquired position using SA and enhances optical diffractive efficiency as well as peak beam intensity. Compared with POF *(phase only filter), cosine-BPOF(cosine-binary phase only filter), that has excellent discrimination capability even if the different rate is 0.1% quantitatively.

Today's wireless communication needs the super-high speed for picture transmission as well as voice. The optical communication with the very wide bandwidth is suitable for this demand. To fulfill the optical wireless communication, however, the atmospheric attenuation in rainy weather condition must be overcome. In the optical satellite up-link communication between geo-satellite and earth station, the factors of attenuation are turbulence, pointing error, scattering, and so on. The most serious factor for these is the scattering by rain. Under the weather conditiion of rain and cloud, in this paper, the atmospheic attenuation which affects the optical satellite up-link communication was considered, and the optimum idameter of the optical satellite transmitting antenna in the earth station versus elevation angles, data rates and rainfall rates was presented.