DOI QR코드

DOI QR Code

A Study on the Influence of Centrifugal Force for Flow Characteristics in Square-sectional Air Duct

정방형 공기덕트 내부의 유동특성에 원심력이 미치는 영향에 관한 연구

  • Bong, Tae-Keun (Division of Marine Engineering, Mokpo National Maritime University) ;
  • Cho, Dae-Hwan (Division of Marine Engineering, Mokpo National Maritime University)
  • 봉태근 (목포해양대학교 기관시스템공학부) ;
  • 조대환 (목포해양대학교 기관시스템공학부)
  • Received : 2012.05.04
  • Accepted : 2012.10.26
  • Published : 2012.10.31

Abstract

In this paper, an experimental and numerical investigation of transition characteristics in a square-sectional curved duct flow under Centrifugal force is presented. The experimental study is carried out to measure axial velocity profiles by using Laser Doppler Velocimeter (LDV) system. Computational fluid dynamic (CFD) simulation was performed using the commercial CFD code FLUENT to investigate the transition characteristics. The flow development is found to depend upon Dean number and curvature ratio. The velocity profiles in center of the duct have lower value than those of the inner and outer walls because of the centrifugal forces.

이 연구에서는 정사각 단면을 갖는 덕트 내부에 원심력의 영향을 받는 유동의 천이특성을 실험 및 수치적으로 규명하였다. 실험적 연구로서 레이저도플러 속도계를 이용하여 축방향속도를 측정하였고, 상용소프트웨어인 플루언트를 이용한 전산유체 시뮬레이션으로 천이특성을 고찰하였다. 유동의 발달은 딘수와 굽힘각에 의존한다는 사실을 알 수 있었으며 덕트의 중앙에서의 속도분포는 원심력 때문에 내외벽보다 낮은 값을 나타내었다.

Keywords

References

  1. 손현철(2005), "곡관덕트에 연결된 정사각단면 직관덕트에서 층류정상유동의 유동장내 유동특성", 대한기계학회논문집 B, 제29권, 제5호, pp. 545-553.
  2. 이철재, 조대환(2009), "슬라이드 밸브 급폐쇄에 따른 디스크 주위 비정상유동의 PIV계측에 관한 연구" 해양환경안전학회지, 제15권, 제3호, pp. 251-256.
  3. 장용준, 정우성, 박일순(2010), "PIV 기법을 이용한 모형 철도터널 직관덕트에서 유동 분포 계측 및 수치해석 결과와의 비교분석", 한국전산유체공학회지, 제15권, 제3호, pp. 39-45.
  4. Aoyama, Y., K. Hijikata and K. Futagami(1989), "Experimental Study on Turbulent Flow in a Curved Tube", 일본기계학회논문집(B편), pp. 2212-2220.
  5. Bong, T. G. and G. M. Park(2000), "A Study on the Flow Characteristics of Developing Transitional Steady Flows in a Curved Duct by Using Laser Doppler Velocimeter (I)", 한국마린엔지니어링학회지, 제24권, 제6호, pp. 768-774.
  6. Hille, P., R. Vehrenkamp and E. O. Schulz-Dubois(1985), "The Devolopment and Structure of Primary and Secondary Flow in a Curved Square Duct" J. Fluid Mech, Vol. 151, pp. 219-241. https://doi.org/10.1017/S0022112085000933
  7. Lee, Y. H.(2012), "Flow Characteristics of Polluted Air in a Rectangular Tunnel using PIV and CFD", 한국마린엔지니어링학회지, 제36권, 제5호, pp. 609-617. https://doi.org/10.5916/jkosme.2012.36.5.609
  8. Takami, T., K. Sudou and Y. Tomita(1989), "Flow of Non-Newtonian Fluids in Curved Pipes (5th Report, Turbulent Flow Region)", 일본기계학회논문집(B편), 제55권, 제516호, pp. 2128-2138.

Cited by

  1. 정사각형 단면을 갖는 180° 곡관에서 위치별 속도분포특성 및 직관거리의 유효성에 관한 연구 vol.17, pp.10, 2012, https://doi.org/10.5762/kais.2016.17.10.618