• Title/Summary/Keyword: yield conditions

Search Result 3,129, Processing Time 0.033 seconds

Photosynthesis, Growth and Yield Characteristics of Peucedanum japonicum T. Grown under Aquaponics in a Plant Factory (식물공장형 아쿠아포닉스에서 산채 갯기름의 광합성, 생육 및 수량 특성)

  • Lee, Hyoun-Jin;Choi, Ki-Young;Chiang, Mae-Hee;Choi, Eun-Young
    • Journal of Bio-Environment Control
    • /
    • v.31 no.1
    • /
    • pp.67-76
    • /
    • 2022
  • This study aimed to determine the photosynthesis and growth characteristics of Peucedanum japonicum T. grown under aquaponics in a plant factory (AP) by comparing those grown under hydroponic cultivation system (HP). The AP system raised 30 fishes at a density of 10.6 kg·m-3 in a 367.5 L tank, and at HP, nutrient solution was controlled with EC 1.3 dS·m-1 and pH 6.5. The pH level ranged from 4.0 to 7.1 for the AP system and 4.0 to 7.4 for the HP system. The pH level in the AP began to decrease with an increase in nitrate nitrogen (NO3-N) and lasted bellower than pH 5.5 for 15-67 DAT. It was found that ammonium nitrogen (NH4-N) continued to increase even under low pH conditions. EC was maintained at 1.3 to 1.5 dS·m-1 in both systems. The concentration of major mineral elements in the fish tank was higher than that of the hydroponics, except for K and Mg. There was no significant difference in the photosynthesis characteristics, but the PIABS parameters were 30.4% lower in the AP compared to the HP at the 34DAT and 12.0% lower at the 74DAT. There was no significant difference in the growth characteristics, but the petiole length was 56% longer in the leaf grown under the AP system. While there was no significant difference in the fresh and dry weights of leaf and root, the leaf area ratio was 36.43% higher in the AP system. All the integrated results suggest that aquaponics is a highly-sustainable farming to safely produce food by recycling agricultural by-products, and to produce Peucedanum japonicum as much as hydroponics under a proper fish density and pH level.

Transition of Rice Culture Practices during Chosun Dynasty through Old References IV. Preparation of Seeds and Land (주요 고농서를 통한 조성시대의 도작기술 발전 과정 영구 IV. 조선시대의 비곡종 및 경지관리)

  • Lee, Sung-Kyum;Guh, Ja-Ok;Lee, Eun-Woong;Lee, Hong-Suk
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.6
    • /
    • pp.576-585
    • /
    • 1991
  • General procedures of seed preparation as conventional guide had been established in China before most of Korean literature documented them. ‘Chwijongbeob’ (method of seed select) was to select good quality of seeds and to discard the rest. In ‘Seonjongbeob’ (method of seed grading) although China employed only ‘Sooseonbeob’ (method of seed select with water), but seeds were selected in order of selection of seeds by winds, selection of seeds by sieve and selection of seed with water in Korea. As compared with the recent techniques, those methods were perfect techniques for selection of good quality seeds of rice, except for method of seed selection by salt water was developed. The method for measurement of seed moisture, and for measurement of melted snow, spoiled urine and extracted juice by boiling water with the bone of livestock were originated from ancient China. The farming books in Korea were more or less followed the above methods. However, these techniques were complicated and impractical interms of validity and rationality. Also, it is judged that these tchniques are more appropriate in dry areas and alkaline soil of China rather than in Korean conditions. The plowing is a work to begin farming, and is operated for air ventilation between atmosphere and earth. Also, this techniques was adopted in the farming books from the early to the late Chosun dynasty without changes. Fields were deep-plowed in the first, in fall (or in spring) and for cultivation, and were shallow -plowed in the second, in spring (or in summer) and in intertillage. The former was for water reserve and land preparation, and the later was for weed control with intertillage. However, plowing in fall which was different from fallowing in dry areas, was recommended in Korea (Jikseol). but was not practiced in Sejongsilrok. This was changed with time, and plowing for cultivation in Korea was interrelated with use of green manure crops, method of plowing of upseting plough, method of manure practice and sometimes dry plowing. In addition, until the 15th century method of using a kind of plowing-tool made of log as farm tools was created to support reclamation for enlargement of farm land in mountaineous and coastal areas. For desolate farm lands by many internal and external disturbances, one tried to recover yield ability by increasing labor productivity from the 17th or 18th century. To do this, ‘Banjongbeob’ (culture method by upset plowing weed control) and ‘Hwanubeob’(culture method by firing weed control) which were cultural methods of ancient China were readapoted but the results were not clearly informed. Also, the reality of those was reexamined in the end of the Chosun dynasty.

  • PDF

Effect of Temperatures during Ripening Period on Morpological Characteristics of Rachis-Grain in Rice (등숙기간중 온도와 벼 이삭 지경간 곡립의 형태 형성차이)

  • Lee, Jeong-Il;Shin, Jin-Chul;Kim, Je-Kyu;Kim, E-Hun;Cho, Dong-Ha
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.40 no.5
    • /
    • pp.662-669
    • /
    • 1995
  • To clarify the effect of temperature during ripening on grain quality, rice plant which was grown under normal natural conditions untill heading stage was subjected various temperature regimes during grain filling stage. Three varieties, Odaebyeo, Hwaseongbyeo and Dongjinbyeo were used. Grains on primary and secondary-rachis branches were harvested seperately and measured specific gravity, grain size and weight. The optimum daily temperature for grain filling of rice during ripening period was about 22$^{\circ}C$ and grain filling under alternating temperature(26/18$^{\circ}C$, day /night) was better than constant temperature (22 /22$^{\circ}C$) based on 1, 000-grain weight and yield. Grain size based on volume per grain was smallest under the constant temperature of 22 /22$^{\circ}C$. The size of secondary-rachis branches was smaller than primary-rachis branch. The difference in size between primary and secondary-rachis branches was biggest in Hwaseongbyeo, followed by Odaebyeo and Dongjinbyeo. The temperature regimes treated did not influence the grain size difference between branches so much. The 1000-grain weight was lighter under high temperature than low temperature in Odaebyeo, but reversed tendency was observed in Dongjinbyeo of secondary rachis-branches.

  • PDF

Estimation of Rice Canopy Height Using Terrestrial Laser Scanner (레이저 스캐너를 이용한 벼 군락 초장 추정)

  • Dongwon Kwon;Wan-Gyu Sang;Sungyul Chang;Woo-jin Im;Hyeok-jin Bak;Ji-hyeon Lee;Jung-Il Cho
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.25 no.4
    • /
    • pp.387-397
    • /
    • 2023
  • Plant height is a growth parameter that provides visible insights into the plant's growth status and has a high correlation with yield, so it is widely used in crop breeding and cultivation research. Investigation of the growth characteristics of crops such as plant height has generally been conducted directly by humans using a ruler, but with the recent development of sensing and image analysis technology, research is being attempted to digitally convert growth measurement technology to efficiently investigate crop growth. In this study, the canopy height of rice grown at various nitrogen fertilization levels was measured using a laser scanner capable of precise measurement over a wide range, and a comparative analysis was performed with the actual plant height. As a result of comparing the point cloud data collected with a laser scanner and the actual plant height, it was confirmed that the estimated plant height measured based on the average height of the top 1% points showed the highest correlation with the actual plant height (R2 = 0.93, RMSE = 2.73). Based on this, a linear regression equation was derived and used to convert the canopy height measured with a laser scanner to the actual plant height. The rice growth curve drawn by combining the actual and estimated plant height collected by various nitrogen fertilization conditions and growth period shows that the laser scanner-based canopy height measurement technology can be effectively utilized for assessing the plant height and growth of rice. In the future, 3D images derived from laser scanners are expected to be applicable to crop biomass estimation, plant shape analysis, etc., and can be used as a technology for digital conversion of conventional crop growth assessment methods.

Antioxidant and Anti-Inflammatory Effects on Optimal Extraction Conditions of Different Edible Parts of Perilla (Perilla frutescens L.) (들깨 가식부위별 최적 추출 조건 확립을 위한 항산화 및 항염증 활성 평가)

  • Min Young Kim;Jung In Kim;Sang Woo Kim;Sungup Kim;Eunyoung Oh;Jeongeun Lee;Eunsoo Lee;Yeon Ju An;Myoung Hee Lee;Choon-Song Kim
    • The Korean Journal of Food And Nutrition
    • /
    • v.36 no.6
    • /
    • pp.551-560
    • /
    • 2023
  • This study was performed to investigate antioxidant and anti-inflammatory activities of perilla(Perilla frutescens L.) seed, flower and leaf according to extraction condition. Perilla seed extracts(PSE), perilla flower extracts(PFE), perilla leaf extracts(PLE) was extracted by stirring extraction (STE, 25℃), shaking extraction (SHE, 80℃), and sonication assisted extraction(SAE, 25℃) with 94% ethanol, 60% ethanol and distilled water, followed by analysis of total polyphenol and flavonoid and testing radical scavenging activities. The highest total polyphenol content (5.47, 9.36, 38.58 mg gallic acid equivalent/g), total flavonoid content(5.77, 8.62, 46.44 mg catechin equivalent/g), ABTS(10.68, 19.46, 63.56 mg trolox equivalent/g) and DPPH(6.51, 7.69, 79.73 mg trolox equivalent/g) radical scavenging activity of PSE, PFE and PLE was observed in the HWE with 60% ethanol,. Among the three extraction method, SHE provided the best results for yield, polyphenol, flavonoid content of perilla seed, flower, leaf in comparison to STE or SAE. SHE with 60% ethanol of perilla seed, flower, leaf more effectively inhibited secretion of nitric oxide(NO) and pro-inflammatory cytokine in RAW 264.7 macrophage exposed to LPS compared to other extraction solvent and method. Therefore, these extracts obtained from perilla seed, flower, leaf could be used antioxidant and anti-inflammatory ingredients in the food industry.

Ethanol extract of Aster glehni exhibits anti-inflammatory and anti-oxidant effects in RAW 264.7 cells and Caenorhabditis elegans (섬쑥부쟁이 에탄올 추출물이 대식세포와 예쁜꼬마선충에서의 항염증 및 항산화 효과 )

  • Mi-Kyung Seo;Han-Na Chu;Da-Bin Lee;Haeng-Ran Kim;In-Seon Hwang;Yong-Jin Jeong;Sung-Ran Yoon;Seok-Seong Kang;Kyeong-A Jang;Min-Sook Kang
    • Food Science and Preservation
    • /
    • v.30 no.6
    • /
    • pp.1095-1106
    • /
    • 2023
  • This study investigated the anti-oxidative and anti-inflammatory effects of Aster glehni (AG) extract in RAW 264.7 cells and Caenorhabditis elegans. The total polyphenol and flavonoid contents were higher in the ethanol extracts than in the hot water extracts. As a result of measuring the moisture contents (%) and extraction yields (%) of AG and drying A. glehni for processing (DAG), 70% ethanol, which has the highest percentage of extraction yield, was selected as the final solvent. DPPH radical scavenging activity showed higher antioxidant activity of ethanol extracts of DAG than AG. The cytotoxicity assay of the AG or DAG ethanol extracts was treated at different concentrations (25, 50, and 100 ㎍/mL), and cell viability rates were higher than 80% at all concentrations. The LPS-stimulated nitric oxide (NO) production in RAW 264.7 was significantly reduced at all concentrations of AG and DAG groups. As a result of measuring the gene expression of iNOS, which induces NO production, the AG or DAG group decreased by 33% and 32%, compared with the phosphate buffer saline (PBS) group. Under inflammatory stress conditions, the survival rate of C. elegans treated with AG or DAG ethanol extract with LPS showed concentration-dependent improvement in survival rate compared with the PBS group. Considering these results, AG could potentially be developed as an antioxidant and anti-inflammatory functional food material.

Breeding of New Ever-bearing Strawberry 'Jinha' with High Soluble Solid Content (당도가 높은 사계성 딸기 '진하' 육성)

  • Jong Nam Lee;Jong Taek Suh;Su Jeong Kim;Ki Deog Kim;Hye Jin Kim;Mi Za Choi;Bok Rye Yun;Hwang Bae Shon;Yul Ho Kim;Su Young Hong
    • Korean Journal of Plant Resources
    • /
    • v.37 no.4
    • /
    • pp.386-391
    • /
    • 2024
  • 'Jinha' is a new strawberry (Fragaria × ananassa Duch.) cultivar, which was released by the Highland Agriculture Research Institute in 2019. The 'Jinha' cultivar originates from a 2011 cross between 'Albion' and 'Goha,' both of which exhibited excellent ever-bearing characteristics, including continuous flowering and large fruits under long-day and high temperature conditions. This new cultivar was initially named 'Saebong No. 11' after examining its characteristics and productivity during summer cultivation between 2012 and 2016. After regional adaptability tests, 'Jinha' was selected from 'Saebong No. 11' as an elite cultivar. The general characteristics of 'Jinha' include intermediate, elliptic leaves, and medium growth. The fruits are conical and of a red color. The plant height of 'Jinha' is simiar to that of the control variety, 'Flamenco', but it has a lot of number of leaves. The cluster length of 'Jinha' was 35.5 cm, 10.8 cm longer than 24.7 cm of the control variety. The number of flower clusters of 'Jinha' appeared 14.4, which was 4.1 more than that of 'Flamenco'. The average fruit weight of 'Jinha' was 10.1 g, which was 0.8 g heavier than that of 'Flamenco'. The soluble solid content of 'Jinha' was 10.2 °Brix, which was 2.0 °Brix higher than that of 'Flamenco'. The marketable yield of 'Jinha' was 25,931 kg·ha-1, 440% more than that of 'Flamenco' with 5,900 kg·ha-1. Therefore, the new cultivar of ever-bearing strawberry 'Jinha' is expected to be very popular in the export or bakery market because it is high soluble solid content and good shape.

Effects of Cutting Condition on Quality of Nursery Plant and Fruit Yield in 'Sulhyang' Strawberry (삽목 조건이 '설향' 딸기의 묘소질 및 과실 수량에 미치는 영향)

  • Sang Woo Lee;Yong Hyuk Lee;Jeum Kyu Hong;Sung Hwan Choi;Soo Jeong Park
    • Journal of Bio-Environment Control
    • /
    • v.32 no.4
    • /
    • pp.405-415
    • /
    • 2023
  • This study was conducted to investigate optimal conditions for cutting propagation of the strawberry cultivar "Sulhyang" through the collection methods of cuttings (runners tips), leaf number of cuttings, and cutting time. Cuttings were collected from the mother plant in the nursery bed (MP) and plants after fruit harvest (HP); the leaf number of cuttings was 0, 1, and 2, and the cutting time was at one-week intervals from June 4 to July 9. The survival rates for MP and HP cuttings were notably high, reaching 99.5% and 98.7%, respectively, but no significant difference was found. The number of roots were higher in MP cuttings, and there was no significant difference in crown and leaf growth. The fruit yields were 419.2 and 428.4 g, for MP and HP cuttings, respectively. The survival rates according to leaf number of cuttings were 98.1% and 98.3% for 1 and 2 remaining leaves, respectively, and remarkably lower at 25.3% for no remaining leaves. The root numbers were 26.0 and 26.3 for 1 and 2 remaining leaves, respectively, compared with 23.5 for no remaining leaves, with no significant differences in crown and leaf growth. The fruit yields were 424.4 and 421.5 g for 1 and 2 remaining leaves, respectively, and 396.7 g for no remaining leaves. The survival rates according to cutting time was over 97.2% in all cutting time without any difference in each treatment. The root, shoot, and crown of the nursery plant before planting showed the best growth in the cuttings on June 4 and 11, resulting in the highest fruit yields of 433.3 and 426.4 g, respectively, with the lowest yields at 384.5 g for cutting time on July 9. Both MP and HP materials proved suitable for strawberry cuttings. The optimal leaf number for cuttings was at least 1, and the optimal cutting time in Gyeongnam area was evaluated as around June 4-11.

Comparison with Growth Characteristics of Korean Melon (Cucumis melo var. makuwa) Grafted Seedlings in a Container Type Farm with LED Light and a Greenhouse under High Temperature Conditions (인공광 기반 컨테이너 육묘 시스템과 고온 조건의 플라스틱 온실 육묘에서 참외 접목묘 생육 특성 비교)

  • Wook Jin Song;Hee Woong Goo;Gyu Won Lee;Hyun Mun Kim;Kyoung Sub Park
    • Journal of Bio-Environment Control
    • /
    • v.33 no.1
    • /
    • pp.22-29
    • /
    • 2024
  • This study was carried out to analyze the growth of grafted seedlings produced in a container-type farm system and a greenhouse to stably produce high-quality seedlings. For 14 days after graft-taking, the characteristics of korean melon grafted seedlings were compared by container farm and greenhouse. The container seedling system maintained a stable day/night temperature (25/20℃), relative humidity (70%), and light environment (PPFD 200µmol·m-2·s-1, photoperiod (16/8h). The difference between day and night temperature (DIF) was relatively large, with a mean temperature of 28.1/15.4℃ in the high-temperature greenhouse. Plant height of the korean melon seedling was longer in the greenhouse than in the closed seedling system, and the average SPAD value was 30.5 and 41.1 in the greenhouse and closed seedling system, respectively. To calculate the compactness of the graft seedlings, the shoot dry weight was divided by the plant height, and the value was 44.9±2.64 mg/cm and 24.4±1.56 mg/cm in the closed seedling system and the greenhouse treatment, respectively, 7 days after graft-taking. To produce high-quality seedlings during high-temperature or low-photo periods, it will be necessary to analyze the key factors that affect growth characteristics and transplanting growth and to verify the effects of the closed seedling system based on post-transplanting growth and yield.

The Association between Periodontal Disease and Renal Disease Occurrence : A Retrospective Cohort Study (치주질환과 신장질환 발생과의 연관성: 후향적 코호트 연구)

  • Seon-Ju Sim;MinHee Hong;Ja-Young Moon;Hye-Sun Shin
    • Journal of Korean Dental Hygiene Science
    • /
    • v.7 no.1
    • /
    • pp.53-68
    • /
    • 2024
  • Background: Research on the association between renal disease and periodontal conditions has yet to yield definitive results. In this study, we analyzed whether periodontal disease increases the risk of developing renal disease using Korean national cohort data over a period of 11 years. Methods: From 2002 to 2015, a retrospective follow-up investigation was conducted on the 203,538 Korean population using the National Health Insurance Service-National Sample Cohort. Periodontal disease and renal disease were identified through diagnoses using the International Statistical Classification of Diseases and Related Health Problems, 10th revision (ICD-10) codes. The assessment of periodontal status involved considering the number of dental visits related to periodontal disease during the baseline 3-year period. Results: During the 11-year follow-up period, renal disease occurred in 19,868 out of the total 203,538 individuals. After adjusting for age, gender, income, smoking, drinking, physical activity, diabetes, hypertension, obesity, hypercholesterolemia, ischemic heart disease, and advanced periodontal treatment, periodontal disease increased the risk of renal disease occurrence by 1.04 times (adjusted hazard ratio [aHR] = 1.04, 95% CI = 1.01 to 1.08). Additionally, a higher frequency of dental visits attributed to periodontal disease was associated with an increased risk of renal disease,exhibiting a dose-response trend (aHR = 1.02, 95% CI = 1.00 to 1.06 for once; aHR = 1.08, 95% CI = 1.04 to 1.13 for two times; aHR = 1.11, 95% CI = 1.03 to 1.21 for three times). Conclusions: Our data confirmed that periodontal disease is associated witha higher incidence of renal disease.