• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.16 no.2
• /
• pp.175-199
• /
• 2005

Family Restaurant is a service business of a kind. The role of service operator is to improve a sales of service goods through maximizing the service value with customer satisfaction at the moment of MOT(moment of truth). Family Restaurant come to the great growth on the face of it. In future, it will place emphasis more and more on not hardware but software including service quality. The purpose of this study, therefore, is to research the effect on service quality of the job satisfaction of Family Restaurant's service staff. Data was collected from the employee who are working at Family Restaurant located in Taegu. The empirical research has been done over 50days from 1April, 2004 to 20May, 2004. In conclusion of empirical analysis, 4 hypotheses were significant among 7 hypotheses suggested in this study. The research showed as follows : First, the organic trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed positive influence on job satisfaction. Second, the personal trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed positive influence on service quality. Third, the official trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed negative influence on job satisfaction. Fourth, the organic trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed positive influence on service quality. Fifth, the personal trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed negative influence on service quality. Sixth, the organic trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed negative influence on service quality. Seventh, the job satisfaction of Family Restaurant service staff showed positive influence on service quality. Besides, the critical points of this study are as follows; First, we designated the subject of research to the employee of Family Restaurant only. Second, multi-situations(time, holiday) which can happen as service was offered, wasn't concerned. Third, as service quality was estimated by general service quality, the research in future should subdivide service quality more. I, finally, applied the pervious researches on job satisfaction and service quality in the employee of Family Restaurant. To extend more this research model in future, the variables like customer satisfaction should be added.

• Asia pacific journal of information systems
• /
• v.18 no.4
• /
• pp.105-130
• /
• 2008

Consumers of e-learning market differ from those of other markets in that they are replaced in a specific time scale. For example, e-learning contents aimed at highschool senior students cannot be consumed by a specific consumer over the designated period of time. Hence e-learning service providers need to attract new groups of students every year. Due to lack of information on products designed for continuously emerging consumers, the consumers face difficulties in making rational decisions in a short time period. Increased uncertainty of product purchase leads customers to herding behaviors to obtain information of the product from others and imitate them. Taking into consideration of these features of e-learning market, this study will focus on the online herding behavior in purchasing e-learning contents. There is no definite concept for e-learning. However, it is being discussed in a wide range of perspectives from educational engineering to management to e-business etc. Based upon the existing studies, we identify two main view-points regarding e-learning. The first defines e-learning as a concept that includes existing terminologies, such as CBT (Computer Based Training), WBT (Web Based Training), and IBT (Internet Based Training). In this view, e-learning utilizes IT in order to support professors and a part of or entire education systems. In the second perspective, e-learning is defined as the usage of Internet technology to deliver diverse intelligence and achievement enhancing solutions. In other words, only the educations that are done through the Internet and network can be classified as e-learning. We take the second definition of e-learning for our working definition. The main goal of this study is to investigate what factors affect consumer intention to purchase e-learning contents and to identify the differential impact of the factors between consumers with purchase experience and those without the experience. To accomplish the goal of this study, it focuses on herding behavior and perceived usefulness as antecedents to behavioral intention. The proposed research model in the study extends the Technology Acceptance Model by adding herding behavior and usability to take into account the unique characteristics of e-learning content market and e-learning systems use, respectively. The current study also includes consumer experience with e-learning content purchase because the previous experience is believed to affect purchasing intention when consumers buy experience goods or services. Previous studies on e-learning did not consider the characteristics of e-learning contents market and the differential impact of consumer experience on the relationship between the antecedents and behavioral intention, which is the target of this study. This study employs a survey method to empirically test the proposed research model. A survey questionnaire was developed and distributed to 629 informants. 528 responses were collected, which consist of potential customer group (n = 133) and experienced customer group (n = 395). The data were analyzed using PLS method, a structural equation modeling method. Overall, both herding behavior and perceived usefulness influence consumer intention to purchase e-learning contents. In detail, in the case of potential customer group, herding behavior has stronger effect on purchase intention than does perceived usefulness. However, in the case of shopping-experienced customer group, perceived usefulness has stronger effect than does herding behavior. In sum, the results of the analysis show that with regard to purchasing experience, perceived usefulness and herding behavior had differential effects upon the purchase of e-learning contents. As a follow-up analysis, the interaction effects of the number of purchase transaction and herding behavior/perceived usefulness on purchase intention were investigated. The results show that there are no interaction effects. This study contributes to the literature in a couple of ways. From a theoretical perspective, this study examined and showed evidence that the characteristics of e-learning market such as continuous renewal of consumers and thus high uncertainty and individual experiences are important factors to be considered when the purchase intention of e-learning content is studied. This study can be used as a basis for future studies on e-learning success. From a practical perspective, this study provides several important implications on what types of marketing strategies e-learning companies need to build. The bottom lines of these strategies include target group attraction, word-of-mouth management, enhancement of web site usability quality, etc. The limitations of this study are also discussed for future studies.

• Journal of Korean Medical classics
• /
• v.23 no.2
• /
• pp.205-223
• /
• 2010

In Korean Traditional Medicine(abbreviated to K.T.M.), hyperhidrosis and anhidrosis are the targets of the medical treatment. Furthermore sweating appearance is also one of the important symptoms which explain a particular situation of the patient in K.T.M. And at "Sanghanron(傷寒論)" which is a traditional chief clinical bible written by Jang Gi(張機) later Han dynasty(漢代) in China made full use of the various kinds of diaphoresis[汗法] as a main medical treatment with purgation therapy[下法] and emetic therapy[吐法]. So the sweat in itself not only is the disease, but also is one of the symptoms explain a disease pattern. This thesis inquires into "Hwangjenaegyeong(黃帝內經)" referring to sweat which is the origin of recognition to the sweat in K.T.M. Some theses similar to this research had been made progresses and already reported, but most of them have classified the contents into biology, pathology, diagnosis, treatment after the model of western medical theory. In the aspect of comparative studying with other literature and clinic practical using, we found characteristics of referring to sweat in "Hwangjenaegyeong(黃帝內經)". And we classify the characteristics into some categories as follows. 1. There are some terms which make a title including sweat and symbolize the characteristics, for example sweat of soul[魄汗], sweat of death[絶汗], sweat of streaming[灌汗], sweat of weakness[白汗], sweat of sleep[寢汗], sweat of bright and heat[炅汗], sweat of kidney[腎汗], sweat of escaping[漉汗], cold sweat[寒汗], sweat on the head[頭汗], hyperhidrosis[多汗], heavy sweat[大汗]. But there aren't spontaneous sweat[自汗] or sweat like a thief[盜汗] which are the normal terms referring to sweat in history of K.T.M. And there are several descriptions about sweat appearance such as sweating in half of body[汗出偏沮], sweating in the rear end and thigh and knee[汗出尻陰股膝], hyperhidrosis in the neck and aversion to wind[頸多汗惡風], hyperhidrosis in the head and face and aversion to wind[頭面多汗惡風], cannot stopping the sweating under head[頭以下汗出不可止], make a person sweat to one's feet[令汗出至足], sweating like escaping[漯漯然汗出], sweating like soaking[汗出如浴], sweating become moist[汗出溱溱], hardly escaping sweat[汗大泄], escaping sweating[漉漉之汗], sweat moisten the pores [汗濡玄府], ceaseless sweating like pouring[汗注不休] sweating like pouring and vexation[汗注煩心], damp with sweat[汗汗然], sweating spontaneously[汗且自出], removal of fever with sweat drying[熱去汗稀]. That can be divided into sweat region and sweat form. 2. There are detailed explanations of the principle of perspirations caused by hot weather, hot food, hard working and meeting damp pathogen. 3. There are some explanations of the principle of removing fever due to the excessive heat from internal and external body through sweating by replenishing the body fluid. And many descriptions about overcoming the febrile disease by dropping temperature through sweating and many diaphoresis for curing. 4. There are some descriptions about five Jang organs perspirations and attachment of five mucous body fluid to five Jang organs. 5. There are pathogenic progresses after sweating affected by the Six Atmospheric Influences and water. And detailed explanations of disease mechanism a sweat leading to another disease. 6. There are descriptions about various sweat absent situations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.867-873
• /
• 2019

As of August 2019, there were 3,823 vessels under 30 tons that could be included in the category of small vessels; these account for 42.5 % of the 9,001 registered vessels in Korea. The problem is that many small vessel seafarers face many problems such as an board communication disconnection, difficulties in communication in maritime license interviews, or education related to maritime training using a large number of nonstandard terms, which are derived from foreign languages; this is leading to a decline the job skills of small vessel seafarers. Therefore, in this study, we closely analyzed the terminology of small vessel seafarers and proposed a standardization plan. In the terminology analysis, the preliminary terms of the maritime license interview and the high-frequency terms of the small vessel educational textbook were identified and the corresponding nonstandard terms were examined. Based on a survey, an expert meeting was held and incorrect Japanese notation, English notation, and the standard language for key terms were presented to analyze which questionnaire was most familiar. The ratio of the use of standard words is relatively high in the case of nautical terms, however, the wrong Japanese notation is used more for engine terms; the analysis results by age and tonnage also generally use the Japanese notation and the use frequency of English notation was determined to be low. Based on this, short- and long-term plans for the use of standard words by small vessel seafarers were proposed, including the production of a standard language dictionary for terms used by these seafarers, a promotion of the importance of using standard terms, active education through educational institutions, and the systematic preparation and implementation of Korean-language education for foreign sailors.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.229-234
• /
• 2001

The EDXRF(Energy Dispersive X-ray Fluorescence Spectrometer) technique was applied to the determination of heavy metals in welding fume. The EDXRF method designed in this study was a non-destructive analysis method. Samples were analyzed directly by EDXRF without any pre-treatment such as digestion and dilution. The samples used to evaluate this method were laboratory samples exposed in a chamber connected with a welding fume generator. The samples were first analyzed using a non-destructive EDXRF method. The samples subsequently were analyzed using AAS method to verify accuray of the EDXRF method. The purpose of this study was to evaluate the possibility of the non-destructive analysis of heavy metals in welding fume by EDXRF. The results of this study were as follow: 1.When the samples were collected under the open-face sampling condition, a surface distribution of welding fume particles on sample filters was uniform, which made non-destructive analysis possible. 2. The method was statistically evaluated according to the NIOSH(National Institute for Occupational Safety and Health) and HSE(Health and Safety Executive) method. 3. The overall precision of the EDXRF method Was calculated at 3.45 % for Cr, 2.57 % for Fe and 3.78 % for Mn as relative standard deviation(RSD), respectively. The limits of detection were calculated at $0.46{\mu}g$/sample for Cr, $0.20{\mu}g$/sample for Fe and $1.14{\mu}g$/sample for Mn, respectively. 4. A comparison between the results of Cr, Fe, Mn analyzed by EDXRF and AAS was made in order to assess the accuracy of EDXRF method. The correlation coefficient between the results of EDXRF and AAS was 0.9985 for Cr, 0.9995 for Fe and 0.9982 for Mn, respectively. The overall uncertainty was determined to be ${\pm}12.31%$, 8.64 % and 11.91 % for Cr, Fe and Mn, respectively. In conclusion, this study showed that Cr, Fe, Mn in welding fume were successfully analyzed by the EDXRF without any sample pre-treatment such as digestion and dilution and a good correlation between the results of EDXRF and AAS was obtained. It was thus possible to use the EDXRF technique as an analysis method of working environment samples. The EDXRF method was an efficient method in a non-destructive analysis of heavy metals in welding fume.

• 한국호스피스완화의료학회:학술대회논문집
• /
• 2004.07a
• /
• pp.100-102
• /
• 2004

Under the current medical system, a terminal patient and his/her family who are neglected inevitably face various aspects of crises including not only physical, but also psychological, social, economic, spiritual and legal problems. Nurses often look after many terminal patents with these types of complicated problems. Therefore, educating the nurses who will take care of such patents would greatly reduce stress so the patents end could their lives in peace and without losing their dignity. This research is a quasi experimental study of nonequivalent control group. A pretest-posttest design where a basic education program is developed for nurses, who frequently treat terminal patents, to understand the importance of the role of hospice and to apply their understandings to treat terminal lancer patents. A sample of the nurses were taken from those who were working in general wards at two general hospitals in Seoul during October, 2003${\sim}$December 2003. The study was composed of 46 experimental group and 43 control group. A basic hospice education program was developed by taking emphasized and overlapping parts from advanced practice hospice nurses education course, short-term education course, an extensive literature survey and by consulting three professionals as well. With the group of 5 professors with vast experiences in oncolgy, 5 nursing administrator, 3 nursing practitioner, the tentative first version of the program was developed and reviewed. Afterwards, by utilizing person to person interviews with 2 head nurses experienced with terminal patients, 1 nurse in charge of hospice, 1 nurse on the contents of the program, and a person to person rating on the educating medium by a nurse were performed. The final version of a basic education program was developed after the second revision. The hospice basic education program consists of introduction to hospice, hospice and commucation, management of pain for terminal cancer patients, physical management for terminal cancer patients, socio-psycological caring of terminal cancer patients and management of death and separation. Total education time was four hours organized into 50 minutes of instruction and 10 minutes of break. $Powerpoint^{(R)}$ software was used as the education medium. As research tools, "Knowledge on Hospice" was developed by the author after receiving a review from one expert. "Attitude of Hospice Nursing" was revised Kim(2001)'s attitude measuring tool which was based on Wang(1998), Kwon(1989), Park and Sung(1991)'s tool. "Liability on nursing terminal patients" was used as developed by Zarits(1980) and Mongomory(1985) translated by Lee(1985). For collecting data, preliminary investigation prior to 1 week of the hospice basic education program and post-investigations after 1 week and 4 weeks of the education were carried out for the nurses at a general ward who understood and agreed on the purpose of the program. Collected data were analyzed throughout t-test, $x^2-test$, Manova test and Bonferroni correction in $SAS^{(R)}$ program. The summary of the investigation is as follows: Hypothesis 1: "Educated experimental group would possess more knowledge on hospice compared to the un-educated control group" was supported after 1 (F=12.14, p=.00) and 4 (F=5.3, p=.02) weeks of education. Hypothesis 2: "Educated experimental group would take a positive attitude toward hospice nursing compared to the un-educated control group" was supported after 1(F=3.92, p=.05) and 4(F=5.05, p=.02) weeks of education. Hypothesis 3: "Educated experimental poop would feel less liability compared to the un-educated control group in nursing terminal cancer patients' was rejected. In this study, it was found that knowledge on hospice was significantly important. By applying hospice basic education programs to nurses, the education program helped nurses to take a positive attitude toward terminal patients. It was, however, seen that the education program had no effect on alleviating liability in nursing terminal patients. Therefore, it is expected that this educational program would help hospices and nurses at general wards to understand the concept and the role of hospice so that terminal patents, now neglected under current medical system, would be able to end their lives in peace.

• The Korean Nurse
• /
• v.36 no.5
• /
• pp.45-62
• /
• 1998

The study was conducted from November 1995 to May 1996 at the one general hospital in Seoul. The total subjects of this study were 412 patients who have the experience of fall accident, among them 31 was who have fallen during hospitalization and 381 was who visited emergency room and out patient clinic. The purposes of this study were to determine the characteristics, risk factors and results of fall accident and to suggest the nursing strategies for prevention of fall. Data were collected by reviewing the medical records and interviewing with the fallers and their family members. For data analysis, spss/pc+ program was utilized for descriptive statistics, adjusted standardized $X^2$-test. The results of this study were as follows: 1) Total subjects were 412 fallers, of which 245(59.5%) were men and 167(40.5%) were women. Age were 0-14 years 79(19.2%), 15-44 years 125(30.4%), 45-64 years 104(25.2%), over 65 years 104(25.2%). 2) There was significant association between age and the sexes ($X^2$=39.17, P=0.00). 3) There was significant association between age and history of falls ($X^2$=44.41. P= .00). And history of falls in the elderly was significantly associated with falls. 4) There was significant association with age and medical diagnosis ($X^2$=140.66, P= .00), chief medical diagnosis were hypertension(34), diabetis mellitus(22), arthritis(11), stroke(8), fracture(7), pulmonary tuberculosis(6), dementia(5) and cataract(5), 5) There was significant association between age and intrinsic factors: cognitive impairment, mobility impairment, insomnia, emotional problems, urinary difficulty, visual impairments, hearing impairments, use of drugs (sedatives , antihypertensive drugs, diuretics, antidepressants) (P < 0.05). But there was no significant association between age and dizziness ($X^2$=2.87, P=.41). 6) 15.3% of total fallers were drunken state when they were fallen. 7) Environmental factors of fall accident were unusual posture (50.9%), slips(35.2%), trips (9.5%) and collision(4.4%). 8) Most of falls occurred during the day time, peak frequencies of falls occurred from 1pm to 6pm and 7am to 12am. 9) The places of fall accident were roads(22.6%), house-stairs 06.7%), rooms, floors, kitchen (11.2%), the roof-top, veranda, windows(10.9%), hospital(7.5%), ice or snowy ways(5.8%), bathroom(4.9%), playground, park(4.9%), subway-stairs(4.4%) and public-bathrooms (2.2%). 10) Activities at the time of fall accident were walking(37.6%), turning around or reaching for something(20.9%), going up or down stairs09.2%), exereise, working07.4%), up or down from a bed(2.7%), using wheelchair or walking aids, standing up or down from a chair(2.2%) and standing still(2.2%). 11) Anatomical locations of injuries by falls were head, face, neck(31.3%), lower extremities (29.9%). upper extremities(20.6%), spine, thorax, abdomen or pelvic contents(l1.4%) and unspecified(2.9%). 12) Types of injures were fracture(47.6%), bruises03.8%), laceration (13.3%), sprains(9.0%), headache(6.6%), abrasions(2.9%), intracranial hemorrage(2.4%) and burns(0.5%). 13) 41.5% of the fallers were hospitalized and average of hospitalization was 22.3 days. 14) The six fallers(1.46%) died from fall injuries. The two fallers died from intracranial hemorrage and the four fallers died of secondary infection; pneumonia(2), sepsis(1) and cell lulitis(1). It is suggested that 1) Further study is needed with larger sample size to identify the fall risk factors. 2) After the fall accident, comprehensive nursing care and regular physical exercise should be emphasized for the elderly person. 3) Safety education and safety facilities of the public place and home is necessary for fall prevention.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Industry Promotion Research
• /
• v.6 no.3
• /
• pp.9-17
• /
• 2021

Childcare teacher experience emotional labor that suppresses, exaggerates, controls and regulates their emotions in order to produce the positive image required in the nursery field. The working environment for infants and toddlers has a problem of lowering the quality of life as a cause of psychological exhaustion of the emotional labor childcare teacher. Because singing helps to improve the quality of human life, research is needed to enable emotional labor childcare teacher to recover from psychological exhaustion and plan a positive life in the process of self-care. First, how is the psychological exhaustion of the emotional labor childcare teacher through song psychotherapy? Second, how is the process of self-care of the emotional labor childcare teacher through song psychotherapy? The study was conducted from March 2017 to May 2020, and through qualitative case studies, data such as in-depth interviews, direct observations, and participation observations were collected at the ○○○ daycare center for 50 minutes every 12 sessions. Based on the above findings, the following conclusions were drawn: First, through singing psychotherapy, emotional labor and childcare staff were able to discover, understand, recognize, face, communicate, and insight into their will to live, psychologically exhausted themselves. Emotional support from others can reduce the experience of emotional depletion and demonstrate a recovery of experience and an improvement in achievement due to frustration at work. Second, the self-care of the emotional labor child care teacher through song psychotherapy proved the temporal, spatial, relational, and emotional caring process, while maintaining the balance between caring for others and caring for oneself, body, mind, and spirituality are organic change. In this study, the psychological exhaustion and self-care process provides an opportunity to discover the essence of life, explore and express one's inner self, take care of others and oneself in a balanced manner, and provide insights for a whole person and healthy self. It is significant in providing opportunities to improve the quality of life through growth.