• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.78-84
• /
• 2014

Viscosity agents were added to water to improve extinguishing performance of low pressure water mist suppression system on wood cribs fire, and a small scale wood cribs fire experiment was conducted to measure the extinguishing performance. CMC and agar were used for viscosity agent and as the amount of viscosity agent enlarges, it showed the increase of the viscosity of aqueous solution and the decrease of the fluidity. On wood cribs fire experiment, the extinguishing efficiency was improved with supplemental viscosity agent as it enhanced the adhesive time of aqueous solution on the wood, and therefore expanded the contact time of fire surface. The surface tension of aqueous solution was decreased with the addition of agar which to be assumed as an increase factor of extinguishing efficiency. By the extinguishing experimental result, the most effective extinguishing agent was CMC 0.6 wt.%, with the flame suppression time and the extinguishing time were reduced by 70s and 93s respectively at this concentration.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.21-26
• /
• 2001

Acquisition of precise information on drying characteristics of wood is indispensable for the improvement of drying schedules and wood quality. Recognition of the exact moisture content at which drying defects such as checks occur during drying with given drying conditions may be essential to reduce drying losses. In this study an image-processing system was combined with a laboratory-scale wood dry kiln for experiments and the surface of tree disk of black locust (Robinia pseudoacacia L.) was monitored to investigate the behavior of check formation over all the drying process. This system showed good potential for improving drying schedules and wood product quality.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.9-20
• /
• 2008

Anatomical comparison of 3 North American species with commercial name of redcedar was executed to provide taxonomic information for prevention of confusion and establishment of sound business transaction in the wood market. Eastern redcedar (Juniperus virginiana) and southern redcedar (Juniperus silicicola) could not be separated on the basis of microstructure and ultrastructure of wood. Western redcedar (Thuja plicata), however, appeared to be obviously separated from eastern and southern redcedar in a number of microscopic and ultramicroscopic features. Useful features for separating these two groups were intercellular spaces in transverse surface, latewood width, radial intertracheid pitting, warty layer and pits with torus extensions in tracheids, ray composition, nodular end walls in ray parenchyma cells, and cross-field pitting.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.21-28
• /
• 2005

For the proper conservation of wooden cultural properties, non-destructive evaluation (NDE) method, which can be used to quantitatively evaluate the internal state of wood members, are needed. In this study, an ultrasonic CT system composed of portable devices was attempted, and the capacity of this system was verified by reconstructing the CT images for two phantoms and two artificially defected specimens. Results from this study showed that the sizes of detected defects were enlarged and the shapes were distorted on the CT images. Also, the positions were shifted somewhat toward the surface of specimen, which is regarded due to the anisotropic property of wood. Compared to the filtered back-projection method, SIRT (simultaneous iterative reconstruction technique) method was determined to be more efficient as the algorithm of image reconstruction for wood. A new ultrasonic CT system is thought to be used as a NDE method for wood. However wood characteristics and wave diffraction within wood made it difficult to accurately evaluate the size, shape and position of defects. To improve the quality of CT image of wood, more research including the relationship between wood and ultrasound is needed, and wood properties should be taken into consideration on the image reconstruction algorithm.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.9-14
• /
• 2005

Changes of sound absorption capability and anatomical features of wood by delignification treatment was estimated. Sound absorption coefficients of wood and delignificated wood had been measured by the two microphone method and anatomical changes of delignificated wood examined by SEM observation. The sound absorption coefficients of delignificated wood generally seemed to be higher than those of normal specimen. Especially, in the frequency range of 2 to 4 KHz, they was about 50% higher than those of normal specimen. Abundant small cracks generated on the cross sectional surface of delignificated wood and the weight of delignificated wood decreased about 8% than that of normal wood. It was considered that the small cracks formed by delignification treatment behaved as a sound absorbing pore.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.326-331
• /
• 2000

This paper describes the statistical analysis techniques for the surface roughness assessment of polished surfaces. In experiments, the polishing process of the sample surfaces which are manufactured by ball end mill is consist of two steps; the cusp removal process and the surface finishing process. For the cusp removal process, the criterion of cusp removal was established from the power spectrum analysis to assess the change of the cusp removal rate. For the finishing process, the surface was polished by the rotational CBN tool and vibration wood tool. And the surface quality of polished surface was assessed using the functional parameters based on the statistical values of surface profiles. Consequently, the surface finish performance of the polished surface using the vibration wood tool was improved.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2010

This study was aimed at offering basic data to develop a new use of sawdust and rice husk. The results of this study were as follows: In surface temperature of ceramics by resin impregnation rate, the velocity was great in the early time of heat transfer because the temperature precipitously increased to 10 minutes elapsed. Also, the surface temperature of ceramics manufactured in resin impregnation rate of 60~70% indicated the highest. Heat transfer was fast in terms of the changes in surface temperature of ceramics according to the carbonization temperature, as because the density of ceramics made on condition of the carbonization temperature of $1000^{\circ}C$and $1200^{\circ}C$ was high. Moreover, ceramics maintained heat for a long time because the descent velocity of surface temperature of ceramics was slower than that of heater.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.292-297
• /
• 2010

Sound absorption capability and anatomical features of kagikazura (Uncaria rhynchophylla) and larch (lalix kaemferi) wood were estimated. Sound absorption coefficients had been measured by the two microphone transfer function method and anatomical features of kagikazura wood examined by SEM observation. The sound absorption coefficients of Uncaria rhynchophylla was higher than lalix kaemferi. Especially, in the frequency range of 1 to 4KHz, sound absorption coefficients of kagikazura was about 2~3 times higher than those of lalix kaemferi. Abundant and big vessel observed on the cross sectional surface of kagikazura wood and simple perforation plate observed on the longitudinal surface. It was surmised that the abundant big vessel element and simple perforation plate behaved as a sound absorbing pore.

• The Plant Pathology Journal
• /
• v.24 no.3
• /
• pp.309-316
• /
• 2008

Mycelium of Ophiostoma quercus albino strain cultured in liquid culture media was harvested, lyophilized, and stored for examining biocontrol efficacy against wood discoloration by staining fungi in the laboratory and field conditions. Dry weight of mycelium grown in brown sugar yeast extract broth(BYB) showed 3.8 times higher than that grown in potato dextrose broth(PDB). The optimum culture period in BYB was 4 weeks. In vitality test of the albino strain, the lyophilized mycelium stored in liquid nitrogen($-196^{\circ}C$) or in a refrigerator($4^{\circ}C$) kept the vitality until 13 months after storage; however, the mycelium stored at room temperature lost the vitality completely after 13 months. The mycelium stored in liquid nitrogen or in a refrigerator protected wood chips from the discoloration by pretreating mycelial suspension on pine wood chips. The mycelium stored at room temperature for 7 months also showed complete protection. These results suggest that the lyophilized mycelium have a biocontrol efficacy only if it keeps the least vitality. In the field conditions, both albino strain and $Woodguard^{(R)}$(commercial chemical protectant) showed significant differences(p=0.05) in discoloration rate as compared to the non-treated control when these were treated on the wood logs of Pinus rigida. The albino strain showed better protection than $Woodguard^{(R)}$. Isolation frequency of blue stain fungi from the chips of wood logs treated with the albino strain was 0% at three months after treatment, while that treated with $Woodguard^{(R)}$ was 76.7%. In another experiment, pre-treatment of mycelial suspension on the cut surface of wood logs also showed significant protection from wood discoloration. Spraying of both albino strain on the cut surface and insecticides on the bark also showed relatively good control effects as compared to insecticide alone on the bark or nontreated control.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.1
• /
• pp.1-12
• /
• 1981

The structure of spiral thickenings, particulary the appearance, arrangement and orientation of thickenings in compression wood of Torreya nucifera, were studied in detail by light and polarizing microscope, scanning and transmission electron microscope. The results obtained are as follows: (1) Using the inclined sections at an angle of 45 degrees to the fiber axis, it seems that we can not only observe the more accurate transverse view of the thickenings but also investigate the formation of their thickenings. (2) Generally 2-4 pieces of thickenings are projected to the cell lumen as nipple-like appearance in transverse section and are as frequent, well developed, forming pair and have the rope-like appearance in radial surface. (3) The secondary wall of early wood is composed of 3 layers (S1, S2, S3) and orientation of thickening appears S helix but that of late wood is of 2 layers (S1, S2) and that orientation shows Z helix. Above two regions are demaracted at several tracheid cells from the growth ring boundary. (4) Orientation of thickening seems to be a element showing the characteristics of compression wood in Torreya nucifera. (5) It believes that the thickenings of compression wood are integral part of the S3 in early wood tracheids and of the S2 in late wood and have the same orientations as the inner-most microfibrils in these layers. (6) Thickening and cavities seem to be not formed together in a secondary cell wall of same tracheids.