• 천문학회보
• /
• 제35권2호
• /
• pp.53.1-53.1
• /
• 2010

Earth's polar motion has been known for more than one century, and it has been monitored by astrometric observation and recently by space geodetic technique. The Chandler and the annual wobbles are two dominant parts of Earth's polar motion. But according to our recent analysis on a relevant and accurate dataset, another polar motion component, of which period is about 500 days, exists with an amplitude of 20 milliarcseconds in average. This third largest component of polar motion should be caused by resonance of unidentified oscillating mode of Earth, possibly Earth's inner core wobble.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.645-650
• /
• 2000

In the prestressed concrete structures, the effective prestressing force of tendon is basically most important item for structural safety and serviceability. The frictional loss is one of the major items for determinating the effective prestressing force and depend on the construction accuracy of the structures. In this thesis, it will be analyzed and found through measured hydraulic jack pressure, tendon elongation and prestressing control system that the tendancy of apparent curvature friction coefficient, the ratio of jacking force and required prestressing force, the ratio of initial jacking force and required prestressing force and compatibility of specified friction loss coefficient. The specified control limit for curvature friction coefficient of prestressing control system is about 0.25 and wobble friction coefficient 0.005. Thus, the control limit should be modified according to changed vale of friction coefficient.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.979-984
• /
• 2003

A Dynamic vibration absorber(DVA) is developed to reduce the excessive vibration of an optical disk drive(ODD) originated from the deriving range of an wobble disk and unbalanced disk. We design the material properties and shapes of the DVA by simulating Frequency response function(FRF) such as target frequency, mass of the DVA, stiffness of damper, damping coefficient, shape and dimension, analyze dynamic characteristics and provide its design guide line for suppressing the vibration of an optical disk derive. To examine the performance of the DVA, the vibration of the feeding system with DVA and without DAA are measured by using a three-axis accelerometer, PCB derive and Pulse analyzer. The result show that the proposed DVA reduces the vibration of wide range in ODD.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.566-570
• /
• 2016

본 연구에서는 플라잉 디스크를 이용하여 Pitching 운동 조건에서의 공력특성을 해석하였다. 본 해석에서 사용한 플라잉 디스크 모델은 프리원 151_140이며, 해석자로는 KFLOW_EDISON_2D_3DOF를 사용하였다. Pitching 운동이 있는 경우 받음각의 변화에 따른 공력특성을 비교 분석하였다. 기준 받음각의 변화에 따라 형상 아랫면과 뒷전 부근에 실속 와류가 다른 형태로 생겨 플라잉 디스크의 공력 특성에 영향을 준다는 것을 확인하였다. 또한, 기준 받음각이 증가 할수록 강한 실속 와류가 발생함을 알 수 있다.

• Journal of Microbiology and Biotechnology
• /
• 제5권3호
• /
• pp.117-124
• /
• 1995

A gene (xynA) encoding the endo-xylanase (E.C.3.2.1.8) from Bacillus stearothermophilus was cloned in E. coli, and its complete nucleotide sequence was determined. The xynA gene consists of a 636 base pairs open reading frame coding for a protein of 212 amino acids with a deduced molecular weight of 23, 283 Da. A putative signal sequence of 27 amino acid residues shows the features comparable with the Bacillus signal sequences; namely, the signal contains a positively charged region close to the N-terminus followed by a long hydrophobic string. The coding sequence is preceded by a possible ribosome binding site with a free energy value of -16.6 kcal/mol and the transcription initiation signals are located further upstream. The translation termination codon (TAA) at the 3 end of the coding sequence is followed by two palindrome sequences, one of which is thought to act as a terminator. The xynA gene has a high GC content, especially in the wobble position of codons (64%). Comparison of the primary protein sequence with those of other xylanases shows a high homology to the xylanases belonging to family G.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.1937-1940
• /
• 2008

The P1 duplex of Tetrahymena group I ribozyme is the important system for studying the conformational changes in folding of ribozyme. The formation of the P1 duplex between IGS and substrate RNA and the catalytic activity of ribozyme require a variety of metal ions such as $Mg^{2+}$ and $Mn^{2+}$. In order to investigate the effect of the $Mg^{2+}$ concentration on the conformation of the P1 duplex, the NMR study was performed as a function of $Mg^{2+}$ concentration. This study revealed that the less stable AU-rich region formed duplex at $50{^{\circ}C}$ under high $Mg^{2+}$ concentration condition but melts out under low $Mg^{2+}$ concentration condition. It was also found that in the active conformation under 10 mM $MgCl_2$ condition, the unstable central G${\cdot}$U wobble pair maintains the significant base pairing up to $50{^{\circ}C}$. This study provides the information of the unique feature of the P1 duplex structure and the roll of $Mg^{2+}$ ion on the formation of the active conformation.

• 한국자기공명학회논문지
• /
• 제20권2호
• /
• pp.46-49
• /
• 2016

MiRNA-155, upregulated in various cancers, is one of the miRNAs that suppress apoptosis of human cancer. Thus, inhibition of the maturation of miRNA-155 could be an effective way to induce apoptotic cancer cell death. The apical stem-loop of the pre-miRNA-155 has been known as a Dicer biding site for RNA cleavage. Here, to understand the molecular basis of the tertiary interaction between pre-miRNA-155 with Dicer, we characterize the structure of the apical stem-loop of pre-miRNA-155 using NMR spectroscopy. The RNA has a stem-bulge-stem-loop-stem structure, which is consist of G-C Watson-Crick and G-U Wobble base pairs. The assignments of imino- protons were further confirmed by 2D $^{15}N-^1H$ HSQC NMR spectrum. The NMR parameters obtained in this study can be further used to investigate the tertiary interaction between pre-miRNA-155 and other biomolecules such as protein, nucleic acids, or small chemicals which might be used to control the apoptosis of cancer.

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1152-1159
• /
• 2013

This paper proposes an effective walking system for a hexapod robot on uneven terrain. To overcome the deficiencies of two-pair walking systems, which are effective on even terrain, the use of only three legs changes the steps required for movement. The proposed system receives feedback data from switches attached to the bottom of the legs and gyro sensor to carry out stable walking using the Bezier curve algorithm. From the coordinates of the Bezier curve, which guarantees the circular motion of legs, the motor's angle value can be obtained using inverse kinematics. The angle values are sent to each motor though RS-485 communication. If a switch is pushed by the surface during navigation in the Bezier curve pattern, the robot is designed to change its circular course. Through the changed course, each leg can be located on an optimal surface and the wobble phenomenon is reduced by using a normal vector algorithm. The simulation and experiment results show the efficiency of the proposed algorithm.

• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.181-189
• /
• 2006

본 연구는 FSM 공법의 PSC 박스 거더교를 최소경비로 자동 설계하는 최적설계 프로그램을 이용하여 곡률마찰계수와 파상마에 대한 적정한 긴장재의 종류를 찾아내고 향후 긴장재의 연구 개발 방향을 제시하였으며, 사용되는 재료의 강도증진에 대한 연구방향을 제시하는데 본 연구의 목적이 있다. 사용된 최적설계 프로그램은 축차 무제약 최소화 기법을 이용하였고, 설계과정에서 설계점들이 설계가능 영역밖에 있는 것을 허용할 수 있도록 Kavlie가 제안한 확장 벌칙함수를 도입하였다. 또한 설계점들의 탐사 방법은 Powel's direct search method를 사용하며, 설계시간을 단축시키기 위해 설계점 변화에 따른 단면력 변화를 Gradient를 이용하여 근사화 시키는 방법을 사용하였다.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.1-7
• /
• 2021

A computer simulation was performed to study the effectiveness of temperature on the type of laser heat source in the context of the heterogeneous welding of aluminum and copper materials. Three different types of heat sources were used in the computer simulation: 1) Single Beam Straight Scan, 2) Single Beam Wobble Scan, and 3) Dual Beam Straight Scan. Among these sources, dual beam straight scan was found to be the most effective from the viewpoint of heat source control. Because the difference between the melting temperatures of copper and aluminum is approximately 400℃, a clear separation of heating temperature was required, and the dual beam straight scan provided superior controllability in this regard. When using the dual beam, the temperature of the 90:10 split was considerably easier to control than that of the 50:50 split. The optimal offset was calculated to be 4 mm off to the copper side, where the melting temperature and thermal conductivity were higher. In this manner, computer simulation was effectively used for determining the optimal laser beam hear source control without performing an actual laser welding experiment.