• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.676-688
• /
• 2014

The IEEE 802.11e EDCA (Enhanced Distributed Channel Access) mechanism has been proposed to improve the QoS (Quality of Service) of various services in WLANs (Wireless Local Area Networks). By differentiating the channel access delay depending on ACs (Access Categories), this mechanism can provide the relative service differentiation among ACs. In this paper, we consider that WLAN is deployed in medical environments to transfer medical traffic and we reveal that the quality of the medical traffic (in particular, ECG signals) is significantly deteriorated even with the service differentiation by IEEE 802.11e EDCA. Also, we analyze the reason for performance degradation and show that IEEE 802.11e EDCA has difficulty in protecting the transmission opportunity of high-priority traffic against low-priority traffic. In order to assure medical-grade QoS, we firstly define the service priority of medical traffic based on their characteristics and requirements, and then we propose the enhanced channel access scheme, referred to as DIFF-CW. The proposed scheme differentiates CW (Contention Window) depending on the service priority and modifies the channel access procedure for low-priority traffic. The simulation results confirm that the DIFF-CW scheme not only assures the QoS of medical traffic but also improves the overall channel utilization.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.191-198
• /
• 2008

6LoWPAN (IPv6 Low-power Wireless Personal Area Network) is IPv6 packets transmission technology at Sensor network over the IEEE 802.15.4 Standard MAC and Physical layer. Adaptation layer between IP layer and MAC layer performs fragmentation and reassembly of packet for transmit IPv6 packets. RFC4944, IETF 6LoWPAN WG standard document define packet fragmentation and reassembly. In this paper, we propose the 6PASim (6LoWPAN Packet Simulator) to perform IPv6 packet fragmentation and reassembly for performance evaluation. The 6PASim consist of two parts. One is Packet_Transmit_module that makes IEEE 802.15.4 frames the IPv6 packet from upper layer, and transmit its. and the another is Packet_Receive_module that reassembles transferred frames and completes original IPv6 packets. we can evaluate frame transmit rate and amount of control message through 6PASim. The result of simulation shows the SRM (Selective Retransmission Method) scheme provider better performance than IRM (Immediate Retransmission Method) scheme.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.65-72
• /
• 2014

Sensor nodes are easily compromised by attacker when which are divided in open environment. The attacker may inject false report and false vote attack through compromised sensor node. These attacks interrupt to transmission legitimate report or the energy of sensor node is exhausted. PVFS are proposed by Li and Wu for countermeasure in two attacks. The scheme use inefficiency to energy of sensor node as fixed report threshold and verification node. In this paper, our propose the next neighbor node selection scheme based on fuzzy logic system for energy improvement of PVFS. The parameter of fuzzy logic system are energy, hops, verification success count, CH select high the next neighbor node among neighbor nodes of two as deduction based on fuzzy logic system. In the experimental, our proposed scheme was improvement to energy of about 9% compare to PVFS.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.101-108
• /
• 2010

Many works on energy-efficient cluster event detection schemes have been done considering the energy restriction of sensor networks. The existing cluster event detection schemes transmit only the boundary information of detected cluster event nodes to the base station. However, If the range of the cluster event is widened and the distribution density of sensor nodes is high, the existing cluster event detection schemes need high transmission costs due to the increase of sensor nodes located in the event boundary. In this paper, we propose an energy-efficient cluster event detection scheme using the minimum boundary polygons (MBP) that can compress and summarize the information of event boundary nodes. The proposed scheme represents the boundary information of cluster events using the MBP creation technique in the large scale of sensor network environments. In order to show the superiority of the proposed scheme, we compare it with the existing scheme through the performance evaluation. Simulation results show that our scheme maintains about 92% accuracy and decreases about 80% in energy consumption to detect the cluster event over the existing schemes on average.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.153-160
• /
• 2015

With the development of recent IT fusion technology, IT fusion technology of medical equipment has been dramatically development. The need to most basic preferential implementation of emergency is the respiration of the patient, it is necessary to first aid is maintained in emergency patients airway simultaneously. However, to the endotracheal intubation is a procedure to secure the airway, it requires experience and first aid, Inc. good career, very that may lead to sequelae in patients who otherwise have failed to procedures It is a sensitive and important procedure. For these reasons, the success rate of current endotracheal intubation technique is not at a high level and about 50 percent. In an attempt to complement these problems, in this paper, in the process of endotracheal intubation, intubated by inserting an endoscopic camera to Into Activation tube, the streaming is a real-time monitoring and wireless video transmission method using, there is a purpose of enabling the monitoring in smart devices increase the success rate of endotracheal intubation of first aid purchases.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2010

3GPP(Third Generation Partnership Project) LTE system that is the next step forward in cellular 3G services address the issues related to power saving at LTE base station. This is because that most of the energy in a typical telecommunication network is consumed by the wireless network's base station site. Power saving at LTE base station fall in with low-carbon green technology. This thesis proposes a power saving MAC protocol for LTE base station which utilizes different graded DRX/DTX(Discontinuous. Reception/Transmission). Considering traffic type in UE, proposed MAC protocol controls adaptive DRX/DTX cycle. The proposed method is more improve power saving performance than another method which is unchanged DRX/DTX by conditions. In this thesis, I propose an power saving MAC protocol in an environment where LTE base station are communicated with UE and prove improvement in performance through simulations.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.249-254
• /
• 2014

Recent advancement of USN technology has lent itself to the evolving communication technology for implantable devices in the field of medical service. The wireless transmission section for communication between implantable medical devices and patients is a cause of concern over invasion of privacy, resulting from external attackers' hacking and thus leakage of private medical information. In addition, any attempt to manipulate patients' medical information could end up in serious medical issues. The present study proposes an authentication protocol safe against intruders' attacks when RFID/USN technology is applied to implantable medical devices. Being safe against spoofing, information exposure and eavesdropping attacks, the proposed protocol is based on hash-function operation and adopts session keys and random numbers to prevent re-encryption. This paper verifies the security of the proposed protocol using the formal verification tool, Casper/FDR.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.9
• /
• pp.19-28
• /
• 2010

The GTS(Guaranteed Time Slot) of the IEEE 802.15.4 standard, which is the contention free access mechanism, is used for low-latency applications or applications requiring specific data bandwidth. But it has some problems such as delay of service due to FIFS(First In First Service) scheduling. In this paper, we proposes a weight based GTS allocation scheme for fair queuing in IEEE 802.15.4 LR-WPAN. The proposed scheme uses a weight that formed by how much more weight we give to the recent history than to the older history for a new GTS allocation. This scheme reduces service delay time and also guarantees transmission simultaneously within a limited time. The results of the performance analysis shows that our approach improves the performance as compared to the native explicit allocation mechanism defined in the IEEE 802.15.4 standard.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.1-8
• /
• 2011

In this paper, we study receiver design issue to apply the OFDM based WLAN specification, such as 802.11p, to the communications in high speed mobile environment, e.g., for the ICT based railroad control on a train having its speed up to 300 km/hr. To successfully apply the existing WLAN specifications without modifying its transmission format, the performance at the receiver will solely depends on the channel estimation performance if we ignore the affect of frequency offset With a speed of multiple hundred km/hr, the channel estimation using only the preamble will not provide enough precision since the channel changes so fast. Therefore, in this paper, taking the high mobility into account, we focus on the design of decision directed channel estimation and equalization techniques and perform simulations to evaluate and compare their performances and to finally confirm the applicability of the existing WLAN specification to the systems with very high mobility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1323-1329
• /
• 2014

In this paper, we analyzed efficient decoding scheme with FTN (Faster than Nyquist) method that is transmission method faster than Nyquist theory and increase the throughput. we proposed viterbi equalizer model to minimize ISI (Inter-Symbol Interference) when FTN signal is transmitted. the proposed model utilized interference as branch information. In this paper, to decode FTN singal, we used turbo equalization algorithms that iteratively exchange probabilistic information between soft Viterbi equalizer (BCJR method) and LDPC decoder. By changing the trellis diagram in order to maximize Euclidean distance, we confirmed that performance was improved compared to conventional methods as increasing throughput of FTN signal.