• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.539-546
• /
• 2010

In next generation wireless communication systems based on OFDM, multiple-input multiple-output (MIMO) technique is adopted in order to achieve high data throughput with limited bandwidth. As one of MIMO techniques, spatial multiplexing scheme needs high performance data detection algorithm that can be performed with low computational complexity. In this paper, we propose an algorithm that can compute QRM-MLD with reduced complexity. Also, hybrid detection technique is proposed, which can reduce the complexity by selecting between MMSE and QRM-MLD according to the channel condition. The proposed algorithm provides the trade-off between performance and complexity. The computer simulations for downlink transmission in 3GPP LTE system show that less than 0.1dB performance degradation can be achieved at 0.1% BER with 59% reduction on computational complexity compared with the conventional QRM-MLD algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.616-626
• /
• 2007

In spatially multiplexed MIMO systems that enable high data rate transmission over wireless communication channels, the spatial demultiplexing at the receiver is a challenging task, and various demultiplexing methods have been developed recently by many researchers. Among the previous methods, maximum likelihood detection with QR decomposition and M-algorithm (QRM-MM)), and sphere decoding (SD) schemes have been reported to achieve a (near) maximum likelihood (ML) performance. In this paper, we propose a novel signal detection method that achieves a near ML performance in a computationally efficient manner. The proposed method is demonstrated via a set of computer simulations that the proposed method achieves a near ML performance while requiring a complexity that is comparable to that of the conventional MMSE-OSIC. We also show that the log likelihood ratio (LLR) values for all bits are obtained without additional calculation but as byproduct in the proposed detection method, while in the previous QRM-MLD, SD, additional computation is necessary after the hard decision for LLR calculation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.645-653
• /
• 2014

Recently, the ocean field researches such as offshore plant, ocean survey and underwater monitoring systems are garnering the attention from both academy and industry. However, the communication in underwater environment is very difficult because of the unique irregular features in water. This is the reason that the application of terrestrial protocols to the water environment is not proper. This paper proposes a routing algorithm that can enhance communication reliability by utilizing channel properties in underwater environment. We address two problems that lead to the poor communication performance, signal attenuation and multi-path problem in water. Overcoming these problems, the proposed algorithm ensures high packet delivery ratio and low transmission delay. Also, this paper evaluates the performance through simulation.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.58
• /
• pp.38-49
• /
• 2006

In order to increase the spectrum efficiency, recently, there is the number of studies for CR technology. For instance, IEEE 802.22 WRAN(Wireless Regional Area Network) WG considered the CR technology as a solution of WRAN system to serve the high speed internet service(1.5 Mbps down stream and 384 kbps up stream) in 100 km overall coverage and 54 MHz-746 MHz band. Basically, in MAC point of view, the WRAN system have been standardizing based on the IEEE 802.16 MAC layer features such as Data transmission method, QoS provision and Bandwidth request schemes. Additionally, the WRAN system further include CR nature functions such as incumbent user protection, self coexistence which would be importantly considered. Also, the inherent WRAN functions are added such as channel bonding and fractional bandwidth usage. This paper mainly explained frame structure, IU protection, self coexistence which are key functions of WRAN system. Finally, in this paper, we expressed a prospect of IEEE 802.22 WRAN standardization.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.43-51
• /
• 2015

South Korea decided to use the public safety long term evolution (PS-LTE) method to build a wireless communications network for national disaster. The move will allow all disaster management agencies, including police, firefighters and the military to use multimedia information, including videos, in addition to voice to carry out rescue operations from 2017. The Ministry of Science, ICT and Future Planning said Thursday that it adopted PS-LTE as the technology method for national disaster management system following a national policy coordination meeting last month. PS-LTE is a method integrating group communication, direction communication between terminals and independent base station function with existing LTE technology. Until now, disaster management agencies used technology that only allowed voice communication. However, transmission of multimedia information is possible using PS-LTE.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.676-688
• /
• 2014

The IEEE 802.11e EDCA (Enhanced Distributed Channel Access) mechanism has been proposed to improve the QoS (Quality of Service) of various services in WLANs (Wireless Local Area Networks). By differentiating the channel access delay depending on ACs (Access Categories), this mechanism can provide the relative service differentiation among ACs. In this paper, we consider that WLAN is deployed in medical environments to transfer medical traffic and we reveal that the quality of the medical traffic (in particular, ECG signals) is significantly deteriorated even with the service differentiation by IEEE 802.11e EDCA. Also, we analyze the reason for performance degradation and show that IEEE 802.11e EDCA has difficulty in protecting the transmission opportunity of high-priority traffic against low-priority traffic. In order to assure medical-grade QoS, we firstly define the service priority of medical traffic based on their characteristics and requirements, and then we propose the enhanced channel access scheme, referred to as DIFF-CW. The proposed scheme differentiates CW (Contention Window) depending on the service priority and modifies the channel access procedure for low-priority traffic. The simulation results confirm that the DIFF-CW scheme not only assures the QoS of medical traffic but also improves the overall channel utilization.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.191-198
• /
• 2008

6LoWPAN (IPv6 Low-power Wireless Personal Area Network) is IPv6 packets transmission technology at Sensor network over the IEEE 802.15.4 Standard MAC and Physical layer. Adaptation layer between IP layer and MAC layer performs fragmentation and reassembly of packet for transmit IPv6 packets. RFC4944, IETF 6LoWPAN WG standard document define packet fragmentation and reassembly. In this paper, we propose the 6PASim (6LoWPAN Packet Simulator) to perform IPv6 packet fragmentation and reassembly for performance evaluation. The 6PASim consist of two parts. One is Packet_Transmit_module that makes IEEE 802.15.4 frames the IPv6 packet from upper layer, and transmit its. and the another is Packet_Receive_module that reassembles transferred frames and completes original IPv6 packets. we can evaluate frame transmit rate and amount of control message through 6PASim. The result of simulation shows the SRM (Selective Retransmission Method) scheme provider better performance than IRM (Immediate Retransmission Method) scheme.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.65-72
• /
• 2014

Sensor nodes are easily compromised by attacker when which are divided in open environment. The attacker may inject false report and false vote attack through compromised sensor node. These attacks interrupt to transmission legitimate report or the energy of sensor node is exhausted. PVFS are proposed by Li and Wu for countermeasure in two attacks. The scheme use inefficiency to energy of sensor node as fixed report threshold and verification node. In this paper, our propose the next neighbor node selection scheme based on fuzzy logic system for energy improvement of PVFS. The parameter of fuzzy logic system are energy, hops, verification success count, CH select high the next neighbor node among neighbor nodes of two as deduction based on fuzzy logic system. In the experimental, our proposed scheme was improvement to energy of about 9% compare to PVFS.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.101-108
• /
• 2010

Many works on energy-efficient cluster event detection schemes have been done considering the energy restriction of sensor networks. The existing cluster event detection schemes transmit only the boundary information of detected cluster event nodes to the base station. However, If the range of the cluster event is widened and the distribution density of sensor nodes is high, the existing cluster event detection schemes need high transmission costs due to the increase of sensor nodes located in the event boundary. In this paper, we propose an energy-efficient cluster event detection scheme using the minimum boundary polygons (MBP) that can compress and summarize the information of event boundary nodes. The proposed scheme represents the boundary information of cluster events using the MBP creation technique in the large scale of sensor network environments. In order to show the superiority of the proposed scheme, we compare it with the existing scheme through the performance evaluation. Simulation results show that our scheme maintains about 92% accuracy and decreases about 80% in energy consumption to detect the cluster event over the existing schemes on average.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.153-160
• /
• 2015

With the development of recent IT fusion technology, IT fusion technology of medical equipment has been dramatically development. The need to most basic preferential implementation of emergency is the respiration of the patient, it is necessary to first aid is maintained in emergency patients airway simultaneously. However, to the endotracheal intubation is a procedure to secure the airway, it requires experience and first aid, Inc. good career, very that may lead to sequelae in patients who otherwise have failed to procedures It is a sensitive and important procedure. For these reasons, the success rate of current endotracheal intubation technique is not at a high level and about 50 percent. In an attempt to complement these problems, in this paper, in the process of endotracheal intubation, intubated by inserting an endoscopic camera to Into Activation tube, the streaming is a real-time monitoring and wireless video transmission method using, there is a purpose of enabling the monitoring in smart devices increase the success rate of endotracheal intubation of first aid purchases.