• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1136-1140
• /
• 1999

Melt blends of polymide 6(PA6) and polypropylene grafted maleic anhydride(PP-g-MA) were prepared to study the influence of chemical reaction between the two polymer components. The tensile, flexural, izod impact, dynamic mechanical properties and phase structure were investigated for this blend system. Tensile strength and modulus of the blends showed synergetic effect upon blending of two polymer components. Flexural properties maintained the value of numerical mean calculated from the weight ratio of two components. Also, notched izod impact strengths showed maximum in th PA6/PP-g-MA 50/50 wt % blend. From the change of tan ${\delta}$ observed, we confirmed the increase of miscibility in this blend system by chemical reaction between PA6 and PP-g-MA. Blends of good impact resistance could be obtained when the PP-g-MA particles of $2{\mu}m$ was dispersed in the PA6 matrix.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.427-433
• /
• 2005

With the completely discovery of the Drosophila genome sequence, the next great challenge is to extract its biological information by systematic expression and to perform functional analysis of the gene. Here we reported a proteome analysis of D. melanogaster with two-dimensional electrophoresis (2-DE) and matrix-assisted laser desorption ionization time-of-flight mass spectrometer (MALDI-TOF-MS). The cell extracts of D. melanogaster, $200{\mu}g$ were resolved to more than 400 silver-stained spots by 2-DE. The most abundant protein spots were ranged from 4.0-7.5 of pI and from 15-90 kDa of molecular weight. The excised spots were destained and in-gel digested by trypsin. The masses of the resulting peptide mixtures were measured by MALDI-TOF-MS. Identified proteins were compared with measured peptide mass and a dynamic peptide searching database which is accessible via the internet. The results revealed that identified proteins were produced by 59 genes derived from 65 protein spots.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.75-83
• /
• 2014

In order to prevent brittle failure of concrete, steel fiber reinforcement is effective composite material. However ductility of steel fiber reinforced concrete may be limited due to shrinkage caused by large content of cement binder. Chemical prestressing for steel fiber reinforcement in cement matrix can be induced through expansive admixture and this can increase reinforcing effect of steel fiber. In this study, mechanical performances in concrete with CSA (Calcium sulfoaluminate) expansive admixture and steel fiber reinforcement are evaluated. For this work, steel fiber reinforcement of 1 and 2% of volume ratio and CSA expansive admixture of 10% weight ratio of cement are added in concrete. Mechanical and fracture properties are evaluated in concrete with steel fiber reinforcement and CSA expansive admixture. CSA concrete with steel fiber reinforcement shows increase in tensile strength, initial cracking load, and ductility performance like enlarged fracture energy after cracking. With appropriate using expansive admixture and optimum ratio of steel fiber reinforcement, their interactive action can effectively improve brittle behavior in concrete.

• Journal of the Society of Disaster Information
• /
• v.13 no.2
• /
• pp.249-257
• /
• 2017

Recently, a cable disconnection accident occurred due to a lightning strike at the Seohae Bridge located in Dangjin-Pyeongtaek City. This is a natural occurrence, but it is a recall that it is very important to review the safety issues due to the disconnection of cable bridges. In other words, the role of cables in cable bridges has a profound effect on the safety of the structure, and it has become necessary to grasp the effect on the entire structural system. The cable bridge is an economic bridge that builds the main tower and supports the bottom plate by cable. The influence of the cable is the main member, which is a big influence on the safety of the whole bridge system. In the cable-stayed bridge, the cables exhibit nonlinear behavior because of the change in sag, due to the dead weight of the cable, which occurs with changing tension in the cable resulting from the movement of the end points of the cable as the bridge is loaded. Modal analysis is conducted using the deformed dead-load tangent stiffness matrix. A new concept was presented by using divided a cable into several elements in order to study the effect of the cable vibration (both in-plane and swinging) on the overall bridge dynamics. The result of this study demonstrates the importance of cable vibration on the overall bridge dynamics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.51-59
• /
• 2004

An experimental procedure to identify failure modes of impact damage using sensor signals and to analyze their general features is examined. A series of low-velocity impact tests from low energy to damage-induced high energy were performed on the instrumented drop weight impact tester to monitor the stress wave signals due to failure modes such as matrix cracking, delamination, and fiber breakage. The wavelet transform(WT) and Short Time Fourier Transform(STFT) are used to decompose the piezoelectric sensor signals in this study. The extent of the damage in each case was examined by means of a conventional ultrasonic C-scan. The PVDF sensor signals are shown to carry important information regarding the nature of the impact process that can be extracted from the careful signal processing and analysis.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.424-432
• /
• 1996

The fiber reinforced thermoplastic composites(FRTP) were prepared with polypropylene fiber(PPF) as matrix and vinylon(VF), Aramid(KF) or nylon fiber(PAF) as reinforcing materials using the integrated fiber mixing apparatus. The composite sheets were prepared by compression molding and their impact and morphological properties were characterized. VF/PP system showed the maximum value in Izod impact strength, while KF/PP system showed the maximum value in high rate impact properties. Ductility Index(DI) order was VF/PP>KF/PP>PAF/PP. A maximum DI for VF/PP, 2.43, was obtained when the weight fraction of VF was 20%. The optimum amount of the reinforcing organic fiber was found to be 20~30%. As a result, it is concluded that VF/PP system has better interfacial adhesion properties than either KF/PP or PAF/PP.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.41-48
• /
• 2014

Experimental study of sedimentation and self-weight consolidation has been primary research area in dredged soil. However, good quality of the dredged soil and minimum water pollution caused by the pumping of reclaimed soil require intensive study of the flow characteristics of dredged material due to dumping. In this study, continuity and the equilibrium equations for mass flow assuming single phase was derived to simulate mass flow in dredged containment area. To optimize computation and modeling time for three dimensional geometry and boundary conditions, depth integration is applied to governing equations to consider three dimensional topography of the site. Petrov-Galerkin formulation is applied in spatial discretization of governing equations. Generalized trapezoidal rule is used for time integration, and Newton iteration process approximated the solution. DG and CDG technique were used for weighting matrix in discontinuous test function in dredged flow analysis, and numerical stability was evaluated by performed a square slump simulation. A comparative analysis for numerical methods showed that DG method applied to SU / PG formulation gives minimal pseudo oscillation and reliable numerical results.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.273-280
• /
• 2008

This paper is thing for a quantitive quality evaluation in national Defense Human Resource Management Information S/W system development. Apply a quantitive quality evaluation way to be based on an international standard to admonish at ISO/IEC 9126. Proposed 6 basis of count, and set up sub 27 items detailed functionality, reliability, use anger, efficiency, maintenance anger, a transplant result, and inspection of quality table wrote the Matrix measured S/W quality to a chart. Studied a quantitive evaluation plan of a Defense Human Resource Management Information S/W system to see weight by the priority order that reflected a characteristic of a national defense business to a Purpose of a subject user, and Presented. It is 80% in quantitive quality evaluation application satisfied under 8, Very Satisfied 7(87.5%) Satisfied 1(12.5%) of Defense Human Resource Managers and judgment worked as marked so that satisfaction of reliability and a user regarding functionality was high and there will be contribute to an elevation of defense capabilities as analyze efficient national defense S/W use and effect.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.224-231
• /
• 2007

Polyurethane (PU) was prepared with the compositions of polytetramethylene glycol (PTMG) having two different molecular weight (250, 1000 g/mol). The optimum composition of PTMG 250/1000 was 60/40 based on the mechanical properties. PU/organoclay nanocomposites were prepared with several kinds of organoclay. The mechanical properties of nanocomposite prepared with 93A were considerable. The improvement in tensile strength and modulus for PU/organoclay nanocomposite with the application of ultrasound compared to the PU/organoclay nanocomposite without the application of ultrasound was factors of 1.2, and hardness (shore A type) increased from 90 to 95. The difference in thermal degradation was not observed. The results of transmission electron micrographs and X-ray measurements suggest that the intercalated organoclay in PU matrix was observed.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.11 no.1
• /
• pp.49-52
• /
• 2013

Fentanyl, a synthetic, highly selective opioid ${\mu}$-receptor agonist, is 50 to 100 times more potent than morphine. The low molecular weight, high potency, great transdermal permeation rate and lipid solubility of fentanyl make it very suitable for transdermal administration. Durogesic is a novel matrix transdermal system providing continuous systemic delivery of fentanyl. In recently, there are many reports that misused or overused fentanyl transdermal patches result in severe intoxication of fentanyl. We present a case of fentanyl toxicity with misused durogesic transdermal patch and discuss the safe and appropriate application of the patches. In conclusion, fentanyl patches should be used in opioid tolerant patients and prescribed at the lowest possible dose and titrated upward as needed. All patients and their caregivers should be educated safe application of fentanyl patches and advised to avoid exposing the patches application site to direct external heat sources, such as heating pads, or electric blankets, heat lamps, sauna, hot tubs, and others. In addition, concomittant medications that affect fentanyl's metabolism should be avoided.