• 제목/요약/키워드: wave type

검색결과 2,258건 처리시간 0.032초

한류의 비즈니스 확장에 관한 연구: 창의성 유형 모델 기반으로 (A Study on K-Wave's Business Expansion: Based on Creativity Type Model)

  • 송민정
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권5호
    • /
    • pp.39-54
    • /
    • 2018
  • 본 연구의 목적은 한류의 비즈니스 영역을 확장하는 것을 목적으로 한다. 선행연구 조사 결과, 2012년 '강남스타일'을 기점으로 산업에 대한 관심이 고조되나, 당시엔 유통망 확대가 주를 이룬다. 이에 연구자는 예술적, 경제적, 과학적, 기술적 창의성으로 구분된 '창의성 유형(Creativity type)' 모델을 토대로 한류산업을 문화산업에서 창의산업으로 확대해 "한류 자산의 생성과 활용을 바탕으로 부와 일자리를 창출할 잠재력을 보유하면서, 개인적 재능이 한류 가치 생산의 기원이 되는 산업"으로 조작적 정의한다. 이를 토대로 한류 자산 생성은 3위권에 있는 영화, 드라마, K팝에 대해, 한류 자산 활용은 화장품, 식음료, 의류산업에 대해, 개인적 재능은 새로운 한류 가치 생산의 기원이 되는 흥행 지적재산권(IP)인 웹툰IP에 대해 2013~2017년 동안 분석하였다. 그 결과, 한류 자산 생성에서 중국 쏠림 배경으로 토종 OTT 발달과 규제를 회피하려는 콘텐츠기업의 대안 찾기 등이, 한류 자산 활용에서 중국향 제품 개발 활성화와 K뷰티콘텐츠 등 유튜버를 통한 뷰티콘텐츠화로 선순환됨이 확인된다. 마지막으로 개인의 재능에서는 탄탄한 스토리로 더욱 짜임새 있게 된 웹툰 IP가 영화, 드라마 등의 새로운 한류 가치 생산의 기원이 됨이 확인된다.

수기자극에 의해 유발되는 경락전위변화에 관한 연구 (A Study on the Changes of Meridians Potential Induced by the Manual art during Acupuncture Therapy)

  • 이용흠;이균정;김한성;신태민
    • 한국정보통신학회논문지
    • /
    • 제10권9호
    • /
    • pp.1625-1632
    • /
    • 2006
  • 시술자로부터 침을 경유하여 유도되는 전위는 피시술자의 경락 경혈에서 전위변화의 원인으로 중요한 요소이다. 이에 대하여, 족양명위경상의 족삼리(ST36)에서 다양한 수기자극 방식에 따라 상거허혈(ST37)과 하거허혈(ST39)에서 유발되는 경락전위 패턴을 관찰하였다. 수기자극에 대한 임상실험결과, 침치료에 있어서 다양한 수기자극조건은 주로 톱니파(용량성 전류) 형태의 전위파형이 관찰되었다. 따라서 시술자와 피시술자간의 침치료 효과에 영향을 주는 주된 자극패턴은 용량성 전류자극 패턴임을 확인하였다.

전기영동형 전자종이 디스플레이에서 전자잉크의 주입 방법 및 구동파형에 따른 전류 특성 분석 (Analysis on Current Characteristics According to Injection Method and Driving Waveform in Electrophoretic-Type E-Paper Display)

  • 이주원;김영조
    • 한국전기전자재료학회논문지
    • /
    • 제33권5호
    • /
    • pp.386-392
    • /
    • 2020
  • In this study, the drift current characteristics of charged particles are analyzed for panels fabricated by varying the waveform biasing of the active particle loading method (APLM), which is a method driven by the electrophoretic principle of loading charged particles into a cell of a barrier rib-type electronic paper. We prepare 3 panels using APLM and 1 panel without APLM. The waveform of APLM uses square wave and ramp wave, and the step voltage wave is applied to the driving voltage. The drift currents measured from the square wave and ramp wave with the same period applied by APLM are 4.872 µC and 5.464 µC, respectively, and the ramp wave is shown to be relatively advantageous for loading charged particles that have a large q/m. The time-current curve results confirm that the abrupt movement of charged particles is occurring. When the step form wave signal with a short time of 1s is first applied, initial large movement of the charged particles is confirmed to occur in all samples, which is understood as the effect of applying the voltage necessary to remove the imaging force. The results of this study are expected to improve the loading of charged particles into the electronic paper cell, driven by the electrophoretic principle and optimization of the driving conditions.

Experimental study on the method of estimating the vertical design wave force acting on a submerged dual horizontal plate

  • Kweon, Hyuck-Min;Oh, Sang-Ho;Choi, Young-Hwan
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제5권4호
    • /
    • pp.569-579
    • /
    • 2013
  • A steel-type breakwater that uses a submerged dual horizontal porous plate was originally proposed by Kweon et al. (2005), and its hydrodynamic characteristics and design methodology were investigated in a series of subsequent researches. In particular, Kweon et al. (2011) proposed a method of estimating the vertical uplift force that acts on the horizontal plate, applicable to the design of the pile uplift drag force. However, the difference between the method proposed by Kweon et al. (2011), and the wave force measured at a different time without a phase difference, have not yet been clearly analyzed. In this study, such difference according to the method of estimating the wave force was analyzed, by measuring the wave pressure acting on a breakwater model. The hydraulic model test was conducted in a two-dimensional wave flume of 60.0 m length, 1.5 m height and 1.0 m width. The steepness range of the selected waves is 0.01~0.03, with regular and random signals. 20 pressure gauges were used for the measurement. The analysis results showed that the wave force estimate in the method of Kweon et al. (2011) was smaller than the wave force calculated from the maximum pressure at individual points, under a random wave action. Meanwhile, the method of Goda (1974) that was applied to the horizontal plate produced a smaller wave force, than the method of Kweon et al. (2011). The method of Kweon (2011) was already verified in the real sea test of Kweon et al. (2012), where the safety factor of the pile uplift force was found to be greater than 2.0. Based on these results, it was concluded that the method of estimating the wave force by Kweon et al. (2011) can be satisfactorily used for estimating the uplift force of a pile.

계단형 보에서의 파형 난류 흐름 수치모의 (Numerical Modeling of Wave-Type Turbulent Flow on a Stepped Weir)

  • 백중철;이남주;윤영호
    • 대한토목학회논문집
    • /
    • 제37권3호
    • /
    • pp.575-583
    • /
    • 2017
  • 계단형 보와 여수로 같은 수공구조물의 상부에서는 스키밍 흐름 그리고 직하류부에서는 정상파를 포함하는 도수 현상인 파형흐름과 같이 다양한 형태의 흐름이 발생한다. 연구에서는 하이브리드 RANS-LES 난류 모델링 기법과 자유수면 변동을 해석하기 위한 VOF (volume of fluid)기법을 병합한 3차원 부정류 수치모형을 이용하여 계단형 보가 설치된 사각형 개수로에서 발생하는 파형흐름과 스키밍 흐름을 포함하는 난류흐름을 수치모의 하였다. 시간평균 수치모의 결과와 기존 수리모형 실험 결과를 비교분석한 결과, 수치모의는 보 하류부에서의 평균유속분포의 변화, 정체파와 수면와류를 포함하는 파형흐름의 전반적인 수면 변화, 파형흐름의 파고와 길이, 정체파 하부에서 발생하는 재순환 흐름 영역의 길이 등을 양호하게 잘 재현하는 것으로 나타났다. 수치모의를 통해서 자유수면과 순간 유속 벡터의 변동, 전단응력과 난류에너지의 분포 그리고 3차원 난류조직구조와 총압력분포의 형태와 변동 자료를 제시하여 스키밍 흐름과 파형흐름 영역에서의 독특한 흐름 거동 특성을 규명하였다.

TRAVELING WAVE SOLUTIONS TO THE HYPERELASTIC ROD EQUATION

  • MOON, BYUNGSOO
    • Journal of applied mathematics & informatics
    • /
    • 제33권3_4호
    • /
    • pp.261-273
    • /
    • 2015
  • We consider the hyperelastic rod equation describing nonlinear dispersive waves in compressible hyperelastic rods. We investigate the existence of certain traveling wave solutions to this equation. We also determine whether two other equations(the b-family equation and the modified Camassa-Holm equation) have our solution type.

깍은 사면체형 소파블록의 안정성 평가 (Investigation of Statbility of Truncated Tetrahedron Type Amore Block)

  • 조홍동;배우석;김명균;이호진
    • 한국안전학회지
    • /
    • 제24권5호
    • /
    • pp.43-47
    • /
    • 2009
  • Armor block is used to reduce wave energy. To do this, the stability of coastal structure is enhanced. It is very expensive to develop a new type armor block. So, the research of new type armor block is very short. We develope truncated tetrahedron type armor block(new type block) which have a hole in center part. In this study, the stability of new type armor block is investigated by hydraulic model test. In the result, the stability coefficient($K_D$) of new type armor block is 11.8. this value is more superior than value of tetrapod.

Development of Multidirectional Nonlinear Numerical Wave Tank by Naoe-FOAM-SJTU Solver

  • Cao, Hong-Jian;Wan, De-Cheng
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제1권1호
    • /
    • pp.14-24
    • /
    • 2015
  • A three-dimensional multidirectional nonlinear numerical wave tank (NWT) based on the Navier-Stokes equations and the Finite Volume Method (FVM) is developed by using the two-phase hydrodynamic flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. The free surface is capturing with the Volume Of Fluids (VOF). The directional wave including Stokes wave, solitary wave and nonlinear wave are simulated and verified. The multi-directional waves are also simulated with particular wave spectral such as JONSWAP and wave directional spreading function. The obtained numerical results show the capability of the solver to generate different type of multidirectional nonlinear waves accurately. Meanwhile, it implies that the presented NWT can easily extend to model the wave-structures interactions, which will be great help to the offshore structures design.

Development of Multidirectional Nonlinear Numerical Wave Tank by Naoe-FOAM-SJTU Solver

  • Cao, Hong-Jian;Wan, De-Cheng
    • International Journal of Ocean System Engineering
    • /
    • 제4권1호
    • /
    • pp.49-56
    • /
    • 2014
  • A three-dimensional multidirectional nonlinear numerical wave tank (NWT) based on the Navier-Stokes equations and the Finite Volume Method (FVM) is developed by using the two-phase hydrodynamic flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. The free surface is capturing with the Volume Of Fluids (VOF). The directional wave including Stokes wave, solitary wave and nonlinear wave are simulated and verified. The multi-directional waves are also simulated with particular wave spectral such as JONSWAP and wave directional spreading function. The obtained numerical results show the capability of the solver to generate different type of multidirectional nonlinear waves accurately. Meanwhile, it implies that the presented NWT can easily extend to model the wave-structures interactions, which will be great help to the offshore structures design.

하천 여울의 분류 및 물리, 수리학적 특성 분석 (Classification of Riparian Riffles and Their Physical and Hydraulic Characteristics)

  • 김성환;양전영;김진홍
    • 한국수자원학회논문집
    • /
    • 제48권2호
    • /
    • pp.137-147
    • /
    • 2015
  • 본 논문에서는 홍천강과 섬진강을 대상으로 하천에 존재하는 다양한 형태의 여울을 체계적으로 분류하고, 물리적 및 수리학적 특성을 분석하였다. 여울의 길이와 폭 비율을 기준으로 긴 형태와 넓은 형태로 분류하고, 상 하류 폭의 변화 정도를 기준으로 집중 형태와 확산 형태로 분류하였다. 또한 흐름의 물결 형태에 따라 떨어지는 형태, 미끄러지는 형태, 약한 파도 및 약한 도수로 분류하였다. 떨어지는 형태와 미끄러지는 형태는 주로 큰 돌 주위의 다양한 입경을 지닌 하상에서 발생하였으며, 약한 파도와 약한 도수는 주로 잔 돌 주위에서 발생하였다. 여울의 흐름 방향 경사는 가운데 부분에서 위로 볼록하였으며, 하류측으로 갈수록 경사가 커졌다. 여울의 종적 구조에 따른 물결형태를 구분하여 보면, 여울의 집중 형태에서는 흐름 방향으로 약한 파도, 미끄러지는 형태 및 약한 도수가 발생하였다. 긴 형태의 경우, 흐름방향으로 약한 파도, 미끄러지는 형태 및 떨어지는 형태가 발생하였다. 넓은 형태의 여울에서는 약한 파도, 약한 도수 및 약한 파도, 약한 도수가 발생하였다.