• Journal of Applied Biological Chemistry
• /
• v.53 no.1
• /
• pp.21-24
• /
• 2010

In recent years, many agricultural scientists are studying on eco-friendly farming methods. Among of lots of the methods, the natural insecticides are highly motivated and interested due to their safety and biodegradable issues, and readily available source of bioinsecticides. In this study, the crude extract of custard apple (Annona reticulata L.) seed and its three fractions which were separated based on polarity indexes were examined for their insecticidal activities against Myzus persicae Sulzer and Nilaparvata lugens S.. The crude extract (Aceton/MeOH) showed strong insecticidal activities against both insects at 3.00 mg/mL ($LD_{50}$=0.45mg/mL for M. persicae S. and 1.42 mg/mL for N. lugens S.). Furthermore, simple fractionation with hexane, chloroform, and water lead to increase three-folds insecticidal activity on chloroform fraction ($LD_{50}$=0.13mg/mL for M. persicae S. and 1.14 mg/mL for N. lugens S.). The results suggest that A. reticulata extracts might be used to control for M. persicae effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1385-1390
• /
• 2012

Couple of laboratory for controlled low strength materials with bottom ash and recycled in-situ soil have been carried out. The optimum mix ratios for 4 cases with flowability and unconfined compressive strength were determined. The optimim mixing ratios were 25 to 45% of insitu soil, 30% of bottom ash, 10 to 20% of fly ash, 0 to 3% of crumb rubber, 3% of cement and 22% of water. Each mixture was satisfied the standard specification, minimum 20cm of flowability and 127 kPa of unconfined compressive strength. Two different curling methods, at room temperature and wet condition, were adopted. The average secant modulus(E50) was 0.07 to 0.08 * $q_u$. The compressive strength at wet condition showed 10% larger than at room temperature. The range of internal friction angle and cohesion for mixtures were 36.5o to 46.6o and 49.1 to 180 kPa, respectively. The mixture with crumb rubber(case 4) showed higher choesion and lower internal friction angle than the others. The pH of all the mixtures was over 12 which is strong alkine.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.27-36
• /
• 2020

The study was compared for growth and yield of cherry tomato (Lycopersicon esculentum var. cerasiforme) crops as affected by various homemade liquid fertilizer (LF), commonly applied in the environmentally friendly farmhouses. LF treatment included UT (untreatment, water), OC (oil cake), BF (bone+fish meal), FA (fish amino meal), SO (sesame oil meal), and SF (starfish). Seasonal pH and EC in SO- and SF-LF rapidly decreased at 30 days after the storage, which were the highest EC of 0.6 - 0.8 dS/m, followed by BF-LF with 0.4 dS/m EC. T-N concentration in LF was the highest on the SF (0.0062%), followed by SO (0.0059%) and BF materials (0.0030%), which were all the great for the K concentration in the LF. P and Ca concentrations were the highest on the FA-LF, with the highest Mg concentration observed on the vegetable SO-LF. Soil EC was the highest on the SF-LF plots of 0.74 dS/m, with no significant differences between the treatments observed on the macro-nutrient concentrations in the soil and leaf. Leaf dry weight, leaf temperature, stem diameter, and plant height were investigated at once per 15 days. UT-LF reduced the leaf dry weight at all the measurement time while the plant height was low at an initial measurement but increased and similar to the other homemade LF treatments at a later measurement. Fruit yield and average fruit weight were the lowest on the UT-LF plots at 75 days after fertigation. Fruit diameter was increased by the BF-LF and SF-LF, with the highest fruit soluble solid contents and fruit coloring observed on the FA-LF. BF-LF maintained high fruit firmness.

• Microbiology and Biotechnology Letters
• /
• v.35 no.4
• /
• pp.261-271
• /
• 2007

Phytoremediation is an economic and environmentally friendly technique to remediate contaminated-soil. In this study, the effects of plants, rhizobacteria and physicochemical factors on phytoremediation have been reviewed. For successful phytoremediation, the selection of plants is primarily important. To remediate soil contaminated with petroleum hydrocarbon, raygrass (Lolium multiflorum lam), white mustard, vetch (Vicia villosa), tall fescue (Festuca arundinacea), legumes, poplar, and Pine (Pinus densiflora) were mainly applied, and the removal efficiency of petroleum hydrocarbon were ranged 68 to 99%. Corn (Zea mays), raygrass (Lolium multiflorum lam), vetch (Vicia villosa), mustard, clover (Trifolium repens), and tall fescue (Festuca arundinacea) were used for the removal of polycyclic aromatic hydrocarbon, and their removal efficiencies were 50-98%. Rhizobacteria play significant roles for phytoremediation because they can directly participate in the degradation of contaminant as well as promoting plants growth. The following rhizobacteria were preferred for phytoremediation: Azospirillum lipoferum, Enterobactor cloacae, Azospirillum brasilense, Pseudomonas putida, Burkholderia xenovorans, Comamonas testosterone, Pseudomonas gladioli, Azotobacter chroococcum, Bacillus megaterium, and Bacillus subtilis. Pysicochemical factors such as pH, temperature, nutrient, electron acceptor, water content, organic content, type of contaminants are consequential limiting factors for phytoremediation.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.342-349
• /
• 2010

Lactic acid is widely used in the food, chemical and pharmaceutical industries, and there is an increasing demand for lactic acid as the raw material of poly lactic acid(PLA), which is a biodegradable polymer. Lactic acid production has been changing over from production by synthesis to production by fermentation, since the fermentation process is more nature friendly and economic. However, the fermentation method generates excess water and impurities with high boilers. The presence of high boilers and non volatility of lactic acid makes the separation of lactic acid very difficult job. Also, the purification-separation process requires the many investment costs and energy costs. Reactive distillation concept was also introduced for the process, giving higher selectivity and yield compared to the convention method. We introduce a new highly integrated process, reactive diving wall column, to reduce the capital and energy cost for producing a pure lactic acid. The reactive dividing wall column combines reactive distillation and dividing wall column. We compared capital and energy consumption required for the purification of lactic acid the between the proposed design structures. And we examined the effect of major process variables on the process performance and determined optimal process.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.10-21
• /
• 2007

The Doam-dam watershed, located at Kangwon Province, Korea, has been experiencing significant changes in land uses, conversion from forest to agricultural/urban areas, with human involvements. However, no thorough investigation of the landscape impacts of land use changes was performed at this watershed using the scientific analytical tool. Thus, the FRAGSTATS model was utilized to quantitatively analyze the landscape impacts of forest fragmentation in this study. To provide the detailed explanations for 11 landscape indices considered in this study, two artificial and simplified landscapes, before and after fragmentations, were constructed. Using these 11 indices, the landscape impacts of forest fragmentation in 19 subwatersheds of the Doam-dam watershed were analyzed. The S1 subwatershed, one of 19 subwatersheds of the Doam-dam watershed, was found to have experienced the significant forest fragmentation from 1985 to 2000 based on landscape analysis using the FRAGSTATS model. The results obtained in this study can be used to evaluate the water quality impacts of forest fragmentations/land use changes at watershed scale level, and establish environment-friendly land use planning based on the results obtained using landscape analytical tool, FRAGSTATS.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.207-218
• /
• 2020

Ashwagandha is an important ancient medicinal crops, being affected with many diseases, among which leaf blight caused by Alternaria alternata has become the constraint resulting in huge yield losses. Continuous usage of chemical methods leads to environment, soil and water pollution. Whereas biological control of diseases is long lasting, inexpensive, eco-friendly and harmless to target organisms. In this context, it is aimed to evaluate five Trichoderma strains viz. Trichoderma virens IMI-392430, T. pseudokoningii IMI-392431, T. harzianum IMI-392432, T. harzianum IMI-392433 and T. harzianum IMI-392434 as bio-control efficacy against A. alternata and growth promoting effect in Ashwagandha. All the Trichoderma strains had varied antagonistic effects against the pathogen. In dual culture technique, the strain T. harzianum IMI-392433 showed maximum percentage inhibition of mycelial growth (54.89%) followed by T. harzianum IMI-392432 (53.83%), T. harzianum IMI-392434 (48.94%) and T. virens IMI-392430, (43.62%) against the pathogen, while the least inhibition percentage was observed with the T. pseudokoningii IMI-392431 (36.60%). The culture filtrate of the Trichoderma strain, T. harzianum IMI-392433 recorded highest inhibition on the mycelial growth (39.05%) and spore germination (80.77%) of pathogen and the lowest was recorded in T. pseudokoningii IMI-392431 (20.45 and 50%). Moreover, seeds treated with spore suspension of the strain T. harzianum IMI-392433 reduced the percentages of disease severity index significantly. The strain T. harzianum IMI-392433 also significantly increased seed germination %, seedling vigor and growth of Ashwagandha. The correlation matrix showed that root yield per plant of Ashwagandha had significant and positive correlation with plant height (r=0.726^⁎⁎), number of leaf (r=0.514^⁎⁎), number of primary branch (r=0.820^⁎⁎), number of secondary branch (r=0.829^⁎⁎), fresh plant weight (r=0.887^⁎⁎), plant dry weight (r=0.613^⁎⁎), root length (r=0.824^⁎⁎), root diameter (r=0.786^⁎⁎), root dry weight (r=0.739^⁎⁎) and fresh root weight (r=0.731^⁎⁎). The significant and negative correlation (r=-0.336^⁎⁎) was observed with the root yield and percentages of disease severity index. The study recognized that the T. harzianum IMI-392433 strain performed well in inhibiting the mycelial growth and reduced the percentages of disease severity index of pathogen as well as increased the plant growth in Ashwagandha.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1027-1033
• /
• 2012

Conventional SMB process is operated using 4-zone having several chromatography columns in each zone. Unlike batch chromatography, SMB process can continuously separate binary materials. Both high productivity and purity are obtainable by using SMB process. In this study, the simulation on Thermal Simulated Moving Bed Concentrator (TSMBC) which is a SMB process with thermal swing adsorption was carried out. The advantage of TSMBC is that adsorption isotherm can be easily controlled by thermal wave or direct heating. Recovery of pure water and concentration of phenol was studied in simulation. To verify environmental-friendly potential of TSMBC, DOWEX $1{\times}4$ was chosen as an adsorbent and phenol was selected as a target material. When 3 columns were used in this study, concentration of phenol is 2.29, 2.28 and 1.31 times higher than injected sample. However, a contamination of phenol in solvent port was found, probably due to the restriction of adsorption isotherm of phenol on DOWEX $1{\times}4$.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.269-276
• /
• 2004

The reclaimed land has peculiar characteristic of nature environment unlike midtown or inland and also, in comparison with inland, has bad weather condition, such as low temperature, strong wind, excessive sunshine, and moisture involved in a salt. Therefore the case of developing water front needs understanding characteristic of weather environment mused by reclamation in detail and proper development and organized maintenance. If development which doesn't investigate topographic and climate characteristic sufficiently is drove ahead, a rise of expense for energy and maintenance is going to be mused by deteriorating weather environmental, occurring a flaw of facility and calculating inaccurate capacity of facility. We looked into the weather state and drew up the standard weather data of the newport area in Busan which is reclaiming and developing now. In this research at the base qf the standard weather data, we calculate the dynamic peak loads for commerce, business and residence and then we utilize the results of the load calculation as basic information to determine facility capacity in the rear city of the newport area.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.111-121
• /
• 2010

As the customer's interest for sidewalk block in the street or apartment complex is increasing, the materials of block which had been a concrete block exclusively are varied to clay paver, native rock and wood etc. Especially, the sales volume of clay paver which is environment-friendly and ergonomic is dramatically increasing every year with two digits growth rate, however, many problems like "Edge Cracking" "Freezing Breakage" "Bending Breakage" "Joint Gap" are happening frequently within a couple of hours after installation due to the durabilities. Because of the characteristics of Ceramic products, clay pavers are very easy to be broken when they are bumped against each other. In addition, they are relatively fragile by a freezing expansion breakage when exposed to water due to hydrophilic property as well as the intensity and absorptance of the products are varied with small difference from the production process such as production equipment and process control. Therefore, it costs a lot of money to repair the breakdown unless production and installation is carried out according to the strict criteria of the quality control. In this study, the symptoms of breakdown frequently happened in clay paver are classified by each type and finally the solution for this problem in the production of brick, installation and criteria of quality control through compressive strength and absorptance test is suggested.