DOI QR코드

DOI QR Code

A Study on the Construction Specification and Quality Assurance Criteria in Clay Paver

점토바닥벽돌의 품질 및 시공기준 연구

  • Received : 2010.09.14
  • Accepted : 2010.11.15
  • Published : 2010.11.30

Abstract

As the customer's interest for sidewalk block in the street or apartment complex is increasing, the materials of block which had been a concrete block exclusively are varied to clay paver, native rock and wood etc. Especially, the sales volume of clay paver which is environment-friendly and ergonomic is dramatically increasing every year with two digits growth rate, however, many problems like "Edge Cracking" "Freezing Breakage" "Bending Breakage" "Joint Gap" are happening frequently within a couple of hours after installation due to the durabilities. Because of the characteristics of Ceramic products, clay pavers are very easy to be broken when they are bumped against each other. In addition, they are relatively fragile by a freezing expansion breakage when exposed to water due to hydrophilic property as well as the intensity and absorptance of the products are varied with small difference from the production process such as production equipment and process control. Therefore, it costs a lot of money to repair the breakdown unless production and installation is carried out according to the strict criteria of the quality control. In this study, the symptoms of breakdown frequently happened in clay paver are classified by each type and finally the solution for this problem in the production of brick, installation and criteria of quality control through compressive strength and absorptance test is suggested.

최근 들어 도심지 보도 또는 아파트 단지내 도로 등에 시공되는 보도블록에 대한 소비자의 눈높이가 높아짐에 따라 과거에는 콘크리트 블록 일색이었던 보도포장 재료가 점토바닥벽돌, 천연석 또는 나무 등으로 다양화 고급화되고 있다. 그 중 특히 사람에게 친환경 친인간적인 점토바닥벽돌의 판매량은 해마다 두 자리수 이상의 성장률을 보일만큼 수요자가 다양하고 많아지고 있으나 시공 후 단시간 내에 '모서리 깨짐', '동결 파손', '휨파괴' 및 '줄눈 벌어짐' 등의 파손이 빈번하게 발생되고 있어 내구성 문제가 지적되고 있다. 점토바닥벽돌은 요업제품의 특성상 벽돌끼리 부딪힐 경우에는 쉽게 깨지는 특성을 가지고 있으며, 물을 쉽게 흡수하는 성질이 있어 동결로 인한 부피 팽창 파손에 비교적 취약할 뿐만 아니라 생산설비와 공정관리 등 생산과정의 미세한 차이에 따라 제품의 강도 또는 흡수율 등 물성에 대한 편차가 크게 발생한다. 그리하여 엄격한 품질관리 기준에 따라 생산과 시공을 하지 않을 경우, 제품에 하자가 발생하여 유지보수에 많은 비용이 소요된다. 본 연구에서는 점토바닥벽돌 포장에서 흔히 발생하는 파손 증상을 유형별로 분류하여 원인을 분석하였으며, 필요시 압축 강도 및 흡수율 시험 등을 통하여 벽돌의 생산, 시공 및 품질관리 기준 등 광범위한 부분에 걸쳐 해결방안을 제시하였다.

Keywords

References

  1. 건설교통부(2003), 도로공사 표준시방서, 14-1 콘크리트 블록포장
  2. 건설교통부(2007), 보도 설치 및 관리지침.
  3. 서울특별시(2006), 서울특별시 전문시방서, 토목편, 10-5-3 벽돌포장
  4. 한국건자재시험연구원(2006), 점토바닥벽돌의 성능평가 및 품질기준(안) 연구
  5. 한국점토벽돌공업협동조합(2006), 점토바닥벽돌 단체표준(KCBIC 0002-1569)
  6. 한국표준협회(2003), KS L4201, 점토 벽돌, Clay brick
  7. 한국표준협회(2009), KS F4419, 보차도용 콘크리트 인터로킹 블록
  8. 일본 규격협회(2007) TS A 0025, 포장용 벽돌(Brick for Pavement)
  9. 일본 인터로킹블록포장기술협회(2007.3), 인터로킹 블록포장 설계시공요령
  10. ASTM C 33 (Grading Requirements for Bedding Sand)
  11. ASTM C 144 (Grading for joint Sand)
  12. ASTM C 902(Pedestrian and Light Traffic Paving Brick)
  13. BS 7533(British Standard Specification for Clay Bricks)
  14. DIN 18503(Clinker bricks for paving - Requirements and test methods)
  15. Interpave, SPECIFICATION OF CONCRETE BLOCK PAVING

Cited by

  1. A Predictive Model for the Number of Potholes Using Basic Harmony Search Algorithm vol.15, pp.4, 2014, https://doi.org/10.6106/KJCEM.2014.15.4.150