• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.156-162
• /
• 2017

CuO의 함량이 반응활성에 미치는 영향을 조사하기 위하여 CuO(x)/0.3Al-0.7Ce (x = 2~20 wt%) 촉매를 함침법으로 제조하고 저온 CO 산화반응을 수행하였다. CuO(10)/0.3Al-0.7Ce 촉매가 반응물 중 수분의 존재 유무에 관계없이 가장 우수한 반응활성을 나타내었다. 수분의 존재는 활성점에 CO와의 경쟁흡착으로 활성점이 감소하여 50% CO 전환율 온도인 $T_{50%}$가 약 $50^{\circ}C$ 고온으로 이동되어 관찰되었다. $N_2O$-적정실험으로 구한 구리 표면적과 CO-펄스 실험으로 계산된 격자산소의 양은 CuO의 함량 증가에 따라 증가하였고, CuO(10)/0.3Al-0.7Ce 촉매에서 최대화되었다. 이러한 특성 분석결과는 사용된 촉매의 CO 산화반응에 대한 $T_{50%}$의 경향과 잘 일치하였다. 위의 특성분석 결과로부터, CuO(x)/0.3Al-0.7Ce 촉매의 CO 산화반응에 대한 반응성은 구리 표면적과 격자산소의 양과 밀접하게 관련된다고 결론지을 수 있다.

• 청정기술
• /
• 제22권3호
• /
• pp.196-202
• /
• 2016

DMC (dimethyl carbonate)를 합성하기 위하여 ceria 계열의 촉매를 이용하여 반응 조건을 확인하는 연구를 수행하였다. 촉매의 합성 조건을 찾기 위하여 소성 온도와 Cu(II)의 함량을 조절하였고, 완성된 촉매는 NH₃-TPD를 이용하여 반응성(산점)을 확인하였다. DMC를 합성하기 위하여, 산화카르보닐화법(oxidative carbonylation, 일산화탄소와 산소를 메탄올과 반응)과 직접합성법(direct synthesis, 이산화탄소를 메탄올과 반응)을 적용하였다. 르샤틀리에의 원리에 따라, 반응 중 생성되는 물을 제거하여 반응성(메탄올 전환율)을 향상시키고자 하였으며, 이를 위해 화학적 탈수제(chemical dehydration agent)인 2-cyanopyridine를 사용하였다. 화학적 탈수 반응을 산화카르보닐화법에 적용하였을 경우, 메탄올 전환율은 15.1%에서 38.7%, DMC 선택도는 0%에서 98.8%까지 향상되었다. 이를 직접합성법에 적용하였을 경우, 메탄올 전환율은 1.0%에서 77.8%, DMC 선택도는 41.2%에서 100.0%까지 향상되었다.

• 폴리머
• /
• 제34권2호
• /
• pp.89-96
• /
• 2010

Methyl methacrylate(MMA), ethyl acrylate(EA), n-butyl acrylate(BA), styrene(St) 단량체를 수용성 개시제인 ammonium persulfate(APS)와 음이온 유화제인 sodium dodecyl benzene sulfonate(SDBS)를 사용하여 organic/organic core-shell 구조의 접착바인더를 중합 후 부직포와 피혁에 함침시키고 플라즈마 표면 처리 후 속도론적인 해석과 기계적인 물성을 평가하였다. Core-shell 바인더 중합시 전환율은 단량체의 조성이 등몰에서 MMA/EA, MMA/BA core-shell 복합입자 모두 90% 이상이 되었다. 등몰에서 부직포/부직포에 core-shell 복합입자를 함침시키고 플라즈마 처리 후의 상태접착 박리강도는 MMA/St, EA/BA, BA/MMA, EA/St, EA/MMA의 순으로 되었고, 또한 부직포/피혁에 core-shell 복합입자를 함침시키고 플라즈마 처리 후의 상태접착 박리강도는 MMA/BA, BA/EA, MMA/EA, St/MMA, EA/St의 순으로 되었다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.587-591
• /
• 2009

Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.149-156
• /
• 2017

This study investigates fire-retardant performances and combustion/thermal characteristics of fire-retardant treated wood by comparing them with those of fire-retardant untreated wood from the expreimental resutls of cone calorimeter and thermo-gravimetric(TG) analyzer. Hazardousness of combustion product gases for fire-retardant treated wood and untreasted wood were also observed from the results of internal finish material incombustibility test according to the Korea standard code of KS F 2271. In this study, we also tried to improve the fire retardant performance of wood by applying fire-retardant chemical composites, and to secure the fire safety performance in buildings. Red pine (Pinus densiflora) was selected as a test specimen because it is mostly used as a building material in Korea. Fire retardant chemical composites (FRCs) were prepared by mixing boron, phosphorous, and nitrogen species and treated by press-impregnation method. Water-based FRCs were composed of 3% boric acid($H_3BO_3$), 3% borax decahydrate($Na_2B_4O_7$), 8% ammonium carbonate($(NH_4)_2CO_3$), diammonium phosphate ($(NH_4)_2HPO_4$) varied from 10-30% and potassium carbonate($K_2CO_3$) varied from 10-30%. From the test results of cone calorimeter, TG analysis and gas hazard assessments, newly proposed were the optimal composition and production methods of FRCs which can sufficiently meet fire-retardant level 3 based on Korea law of construction. Thus, the FRCs, developed in this study, are anticipated to contribute to the improvement of fire safety and widespread of usage in wood as building materials.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.808-814
• /
• 2010

Activities of nanostructure HZSM-5 and Co-ZSM-5 catalysts (with different Co-loading) for catalytic conversion of ethyl acetate and toluene were studied. The catalysts were prepared by wet impregnation method and were characterized by XRD, BET, SEM, TEM and ICP-AES techniques. Catalytic studies were carried out inside a U-shaped fixed bed reactor under atmospheric pressure and different temperatures. Toluene showed lower reactivity than ethyl acetate for conversion on Co-ZSM-5 catalysts. The effect of Co loading on conversion was prominent at temperatures below $400^{\circ}C$ and $450^{\circ}C$ for ethyl acetate and toluene respectively. In a binary mixture of organic compounds, toluene and ethyl acetate showed an inhibition and promotional behaviors respectively, in which the conversion of toluene was decreased at temperatures above $350^{\circ}C$. Inhibition effect of water vapor was negligible at temperatures above $400^{\circ}C$. An artificial neural networks model was developed to predict the conversion efficiency of ethyl acetate on Co-ZSM-5 catalysts based on experimental data. Predicted results showed a good agreement with experimental results. ANN modeling predicted the order of studied variable effects on ethyl acetate conversion, which was as follows: reaction temperature (50%) > ethyl acetate inlet concentration (25.085%) > content of Co loading (24.915%).

• 폴리머
• /
• 제32권3호
• /
• pp.213-218
• /
• 2008

우리나라 전체 문화재중 약 17%에 해당하는 석조문화재는 대부분 옥외에 있고 시간이 지남에 따라 물리적, 화학적, 기계적, 생물학적인 풍화가 진행되고 있어 표면의 색변화, 균열, 부서짐 등이 발생하게 된다. 이러한 풍화현상을 저지하고 지속적인 형태 유지를 위해 적절한 보존처리가 요구된다. 가압과 감압이 가능한 가압용기를 이용하여 저점도의 아크릴계 단량체인 MMA를 암석에 함침시키고 중합하면 암석의 내부 깊숙이 고분자물질을 충진시킬 수 있다. 그에 따라 암석 구성 물질간의 치밀한 결합이 유지되고 발수성 및 내후성 향상이 기대된다. 본 연구에서는 국내산 화강암 2종을 이용하여 처리 후 수분흡수성, 내화학성, 기계적 성질 등의 변화를 통해 석조문화재에 대한 보존처리 방법으로써 의 가능성을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.344-359
• /
• 2019

Effects of various types of zeolite on the catalytic performance of hydrodeoxygenation (HDO) of bio-oil obtained from waste larch wood pyrolysis were investigated herein. Bifunctional catalysts were prepared via wet impregnation. The catalysts were characterized through XRD, BET, and SEM. Experimental results demonstrated that HDO enhanced the fuel properties of waste wood bio-oil, such as higher heating values (HHV) (20.4-28.3 MJ/kg) than bio-oil (13.7 MJ/kg). Water content (from 19.3 in bio-oil to 3.1-16.6 wt% in heavy oils), the total acid number (from 150 in bio-oil to 28-77 mg KOH/g oil in heavy oils), and viscosity (from 103 in bio-oil to $40-69mm^2/s$ in heavy oils) also improved post HDO. In our experiments, depending on the zeolite support, NiFe/HBeta exhibited a high Si/Al ratio of 38 with a high specific surface area ($545.1m^2/g$), and, based on the yield of heavy oil (18.3-18.9 wt%) and HHV (22.4-25.2 MJ/kg), its performance was not significantly affected by temperature and solvent concentration variations. In contrast, NiFe/zeolite Y, which had a low Si/Al ratio of 5.2, exhibited the highest improved quality for heavy oil at high temperature, with an HHV of 28.3 MJ/kg at $350^{\circ}C$ with 25 wt% of solvent.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.644-650
• /
• 2021

본 연구는 지구 온난화의 주요 원인인 이산화탄소를 이용하여 메탄의 개질반응 특성을 수행하였다. 이산화탄소와의 메탄 분해 반응을 전이금속 촉매인 주석을 사용하여 수행되었으며, 주석의 분해 반응성은 니켈, 철과 같은 전이 금속보다 낮으며, 대부분의 분해 반응은 고체 상태 촉매하에 수행된다. 반면에 주석의 녹는점은 505.03K로 액상 촉매하에서 분해가 발생된다. 주석을 사용하는 경우 액상으로 반응하며 메탄이 분해되어 생성되는 고체상 탄소가 촉매에 침적되어 비활성화되는 것을 것을 방지하는 장점이 있다. 이산화탄소를 사용하여 메탄을 분해하는 경우 일산화탄소와 수소를 생성한다. 촉매의 활성과 수명을 높이기 위해 Ni를 사용한 경우 촉매 활성이 향상되었다. 본 연구에서는 과잉습식함침법을 이용하여 촉매를 합성하였으며, 반응 온도, 공간 속도에 따른 활성과 촉매 재생 가능성을 타진하였다. 탄소가 침적된 주석의 촉매 재생 온도는 1023 K로 나타났으며, 니켈을 조촉매로 사용하고 물을 공급하므로써 반응성이 향상되는 것으로 나타났다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2019년도 정기학술대회 발표논문집
• /
• pp.134-134
• /
• 2019

Utilization of organic waste as a renewable energy source is promising for sustainability and mitigation of climate change. Pyrolysis converts organic waste to gas, oil, and biochar by incomplete biomass combustion. Biochar is widely used as a soil conditioner and adsorbent. Biochar adsorbs/desorbs metals and ions depending on the soil environment and condition to act as a nutrient buffer in soils. Biochar is also regarded as a carbon storage by fixation of organic carbon. Phosphorus (P) and nitrogen (N) are strictly controlled in many wastewater treatment plants because it causes eutrophication in water bodies. P and N is removed by biological and chemical methods in wastewater treatment plants and transferred to sludge for disposal. On the other hand, P is an irreplaceable essential element for all living organisms and its resource (phosphate rock) is estimated about 100 years of economical mining. Therefore, P and N recovery from waste and wastewater is a critical issue for sustainable human society. For the purpose, intensive researches have been carried out to remove and recover P and N from waste and wastewater. Previous studies have shown that biochars can adsorb and desorbed phosphates implying that biochars could be a complementary fertilizer. However, most of the conventional biochar have limited capacity to adsorb phosphates and nitrate. Recent studies have focused on biochar impregnated with metal salts to improve phosphates and nitrate adsorption by synthesizing biochars with novel structures and surface properties. Metal salts and metal oxides have been used for the surface modification of biochars. If P removal is the only concern, P adsorption kinetics and capacity are the only important factors. If both of P and N removal and the application of recovery are concerned, however, P and N desorption characteristics and bioavailability are also critical factors to be considered. Most of the researches on impregnated biochars have focused on P removal efficiency and kinetics. In this study, coffee waste is thermally treated to produce biochar and it was impregnated with Mg/Al to enhance phosphates and nitrate adsorption/desorption and P bioavailability to increase its value as a fertilizer. Kinetics of phosphates and nitrate adsorption/desorption and bioavailability analysis were carried out to estimate its potential as a P and N removal adsorbent in wasewater and a fertilizer in soil.