• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.143-150
• /
• 2011

In this paper, we intend to implement system of the automation of foul/waste water disposal plant by using processed sensor data. We designed the model of communication system based on wireless indoor environment, implemented monitoring and control system based on IP. In the implemented monitoring system, it is possible to control and monitor through not only PC but also smart device(tablet PC, smart phone) anywhere, if WEB is connected.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.751-757
• /
• 2016

The present work discusses two different models of boiling water reactor (BWR) bundle to compare the neutronic characteristics of uranium dioxide ($UO_2$) and uranium zirconium hydride ($UZrH_{1.6}$) fuel. Each bundle consists of four assemblies. The BWR assembly fueled with $UO_2$ contains $8{\times}8$ fuel rods while that fueled with $UZrH_{1.6}$ contains $9{\times}9$ fuel rods. The Monte Carlo N-Particle Transport code, based on the Mont Carlo method, is used to design three dimensional models for BWR fuel bundles at typical operating temperatures and pressure conditions. These models are used to determine the multiplication factor, pin-by-pin power distribution, axial power distribution, thermal neutron flux distribution, and axial thermal neutron flux. The moderator and coolant (water) are permitted to boil within the BWR core forming steam bubbles, so it is important to calculate the reactivity effect of voiding at different values. It is found that the hydride fuel bundle design can be simplified by eliminating water rods and replacing the control blade with control rods. $UZrH_{1.6}$ fuel improves the performance of the BWR in different ways such as increasing the energy extracted per fuel assembly, reducing the uranium ore, and reducing the plutonium accumulated in the BWR through burnup.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.1977-1985
• /
• 2014

Many countries around the world are amplifying interest and studies on irrigation, flood control and environment with concern on serious water problems. Especially for irrigation in water supply vulnerable areas such as coastal areas - islands, business on underwater resource security facilities are promoted to secure stable water resources due to development of society and increase of life quality. Also, various policies such as reuse of leaking underwater, utilization of underwater at waterfront, and artificial recharge, etc are planned and designed. In order to develop small sized underwater resource secure technology, verification of seawater-freshwater interface is executed and how the balance between these will develop is a great interest of coastal areas - islands. In this study, seawater-freshwater interface behavior analysis experiment was conducted while reflecting properties of coastal areas - islands and executed hydraulic similitude of saltwater intrusion form control technology on abstraction.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.267-272
• /
• 2011

This study was carried to investigate the antidiabetic metabolism effect of water extract $Cordyceps$ $Militalis$(C.M.) in Streptozotocin(STZ) induced diabetic rats. Diabetes were induced by intravenous injection of STZ at a dose of 42mg/kg,b.w. dissolved in citrate buffer. The water extract of C.M. was orally administrated once a day for 7 days at a dose of 500mg/kg,b.w(body weight). or 1,000mg/kg.b.w. The content serum glucose was significantly decreased in C.M. treated group compared to the those of STZ-control group. The content of hepatic glycogen and activities of glucose-6-phosphate dehydrogenase(G-6-PDH), glucokinase(GK) were significantly increased, but activity of glucose-6-phoshatase(G-6-Pase) was significantly decreased in C.M. treated group compared to the those of STZ-control group. These results indicated that water extract of C.M. would have antidiabetic metabolism effect in STZ-induced diabetic rats.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.441-445
• /
• 2010

The ouput power of wave energy system in buoy is determined according to the inner diameter of oscillating water column and flow resistance. The increase of adhered shellfish inside the water column leads to decrease the inner diameter of wave energy converter. Influx loss of seawater reduces the efficiency of output power in the wave generation system. In this paper, the test result of AFS characteristic is described for preventing the deposition with shellfish and etc. The current of anode is controlled by buck converter, and the control algorithm developed for AFS in buoy. The experimental results is shown excellent preventing capapbility of AFS in buoy.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.257-262
• /
• 2002

Water-Electrolyzed gas is a mixed gas has the constant volume ratio 2 1 Hydrogen and Oxygen gained from electrolyzed water, and it has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG used for existing gas welding equipment. So nowdays many studies of Water-Electrolyzed gas are progressed, and commercially used as a source of thermal energy for gas welding in the industry. For Water-Electrolyzed Source, it was used diode rectifier or SCR rectifier for get DC source. This method which is not looking to improve a source for impossible current control or voltage and limited control intervals. In this paper, it was relized and designed In source of pulse type for complementing existing - DC source type, also by experiment it was acquired producting characteristics of Hydrogen -Oxygen Gas through feature of source

• Environmental Analysis Health and Toxicology
• /
• v.19 no.3
• /
• pp.271-278
• /
• 2004

Epoxy resins are mostly used as a molding material for drinking water tank. Bisphenol A is used at a constituent material for epoxy resins and is widely suspected to act as an endocrine disrupter. In this study, we investigated embryo hatching in zebrafish reared in water undergone leaching process of expoxy resin, and found a decreased survival rate. Bisphenol A eluted from epoxy resin in drinking water tank was completely degraded by TiO$_2$ photocatalysis. We detected 7.8 ng/ml of bisphenol A in epoxy resin tank, and observed that the concentration was undetectable after 48h photocatalysis over TiO$_2$. There was no toxicity in hatching rates in zebrafish and morphogenesis after photocatalysis. The effect of TiO$_2$ photocatalytic reactions on the catalase activities in the f]y stage of zebrafish was also examined. At 1 week post hatching, cataiase activities were higher both in the group of epoxy resin with 48 h TiO$_2$ photocatalysis and in the TiO$_2$ photocatalysis for 48 hours were higher than control group. However catalase activities of the treatment group of epoxy resin by TiO$_2$ photocatalysis for 48 hours were similar to control in 5 weeks post hatching fries. In conclusion, the toxicity of TiO$_2$ photocatalysis was not observed in this zebrafish.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.928-933
• /
• 2012

In this paper, the IR and compass sensors for the underwater system were used. The walls of the water tank have been recognized and avoided treating the walls as obstacles by the bio-mimetic underwater robot. This paper is consists of two parts: 1.The hardware part for the IR and compass sensors and 2.The software part for obstacle avoidance algorithm while the bio-mimetic robot is swimming with the obstacle recognition. Firstly, the hardware part controls through the RS-485 communications between a microcontroller and the bio-mimetic underwater robot. The software part is simulated for obstacle recognition and collision avoidance based upon the data from IR and compass sensors. Actually, the bio-mimetic underwater robot recognizes where is the obstacle as well as where is the bio-mimetic robot itself while it is moving in the water. While the underwater robot is moving at a constant speed recognizing the wall of water tank as an obstacle, an obstacle avoidance algorithm is applied for the wall following swimming based upon the IR and compass sensor data. As the results of this research, it is concluded that the bio-mimetic underwater robot can follow the wall of the water tank efficiently, while it is avoiding collision to the wall.

• Preventive Nutrition and Food Science
• /
• v.20 no.3
• /
• pp.162-168
• /
• 2015

Lotus (Nelumbo nucifera Gaertn.) seed is widely used as a traditional medicine in countries of Asia. Among many functions of the lotus seed, one interesting activity is its skin protection from the sunlight and scar. In this study, we focused on the skin protective property of lotus seed tea against ultraviolet B (UVB) irradiation. Two groups of a hairless mouse model, water as control (water group) and lotus seed tea (LST group), were administrated a fluid drink water for six months. After 6 month of administration, UVB exposure was carried out to both groups for another 3 months. During and after the administration, the skin moisture content and the morphological and histopathological analyses through biopsy were carried out. Prior to UVB irradiation, no significant difference was discovered in the skin moisture content for the water group and LST group (P<0.05). However, drastic changes were observed after the UVB treatment. The LST group showed a clear evidence of skin protection compared to the control group (P<0.05). The moisture content, epidermal and horny layer thickness, and protein carbonyl values all revealed that the intake of the lotus seed tea enhanced protection against UVB exposure. As a result, the long-term intake of the lotus seed tea showed the effect of preventing loss of skin moisture, mitigating the formation of abnormal keratinocytes, and contributing to protein oxidation inhibition.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.770-775
• /
• 2010

As considerable interests in noise emission from the ships have been increased, control of the propeller cavitation generating vibration and radiating noise is looming large. In general, the tip vortex cavitation is first produced in case of full scale propellers, and noise levels rise dramatically from that moment. In order to reduce induced noise from the tip vortex cavitation and hence increase the cavity inception speed, we propose the mass injection method. Water injected from the propeller tip decreases rotating speed of the tip flow, and it restrains growing the tip vortex cavity. Experimental investigations of the model tests carried out in a large cavitation tunnel show that the tip vortex cavitation is effectively controled by water injection from the propeller tip.