• The Korean Journal of Pharmacology
• /
• v.20 no.2
• /
• pp.1-6
• /
• 1984

It has been generally recognized that the secretion of aldosterone is mainly regulated by angiotensin II in animals and humans, however, potassium and ACTH are also proposed as other humoral factors involved in the aldosterone secretory process. Recently, stress, anesthesia, adrenergic stimulation, low sodium intake or water deprivation stimulate plasma renin activity, while high sodium intake and deoxycorticosteroid have been reported to cause suppression of renin activity in animals. It seems that overall response of aldosterone secretory mechanisms reflects complex interactions both intrarenal and extrarenal components. Furosemide has been widely used to investigate the control of renin secretion by the kidney, and the relationship between diuretics and the disposition of endogenous aldosterone were reported (Oh, 1984). The sequential with 10 min interval samples of plasma were collected following administration of furosemide(1 mg/kg), aspirin(10 mg/kg), respectively. And also similar experiment was performed in the propranolol (10 mg/kg) pretreated rabbits. The results were as follows : 1) The concentration of plasma aldosterone was average of $426.I{\sim}485.5pg/ml$ in normal rabbits. Plasma concentrations of aldosterone rised significantly after injection of furosemide during 50 min, and the rise of plasma aldosterone was blocked by the propranolol pretreatment 2) Significant fall in the plasma level of aldosterone after injection of aspirin was noted. This result indicates that the increased secretion of aldosterone induced by furosemide administration is mediated through ${\beta}-receptors$, and the possible role of prostaglandin is substantiated.

• Nutrition Research and Practice
• /
• v.12 no.2
• /
• pp.101-109
• /
• 2018

BACKGROUD/OBJECTIVES: The objective of this study was to investigate the effects of vitamin C on inflammation, tumor development, and dysbiosis of intestinal microbiota in an azoxymethane (AOM)/dextran sulfate sodium (DSS)-induced inflammation-associated early colon cancer mouse model. MATERIALS/METHODS: Male BALB/c mice were injected intraperitoneally with AOM [10 mg/kg body weight (b.w)] and given two 7-d cycles of 2% DSS drinking water with a 14 d inter-cycle interval. Vitamin C (60 mg/kg b.w. and 120 mg/kg b.w.) was supplemented by gavage for 5 weeks starting 2 d after the AOM injection. RESULTS: The vitamin C treatment suppressed inflammatory morbidity, as reflected by disease activity index (DAI) in recovery phase and inhibited shortening of the colon, and reduced histological damage. In addition, vitamin C supplementation suppressed mRNA levels of pro-inflammatory mediators and cytokines, including cyclooxygenase-2, microsomal prostaglandin E synthase-2, tumor necrosis $factor-{\alpha}$, Interleukin $(IL)-1{\beta}$, and IL-6, and reduced expression of the proliferation marker, proliferating cell nuclear antigen, compared to observations of AOM/DSS animals. Although the microbial composition did not differ significantly between the groups, administration of vitamin C improved the level of inflammation-related Lactococcus and JQ084893 to control levels. CONCLUSION: Vitamin C treatment provided moderate suppression of inflammation, proliferation, and certain inflammation-related dysbiosis in a murine model of colitis associated-early colon cancer. These findings support that vitamin C supplementation can benefit colonic health. Long-term clinical studies with various doses of vitamin C are warranted.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.77-82
• /
• 2010

These days our coasts have been damaged by the polluted water resulting from the construction of industry on the shore, increasing population and urbanization. The destruction of ecosystem has induced many problems to aquaculture such that it raises the production cost of aquatic products for eating. For solving these problems aquafarm has been moving to the land. This paper intends to describe the automatic feeding system for the inland fish farm. An existent automatic feeding system has problems such that feed quantity is not accurate and feed itself is broken by feed motor. But a proposed system in this paper is more accurate than the existent system in view of feed quantity by using the combination of valve and load-sell. Resultantly, the system can safely transfer feed to inland nursery tank. Through several experiments using a real system, the effectiveness of the proposed system is verified under all conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1192-1200
• /
• 2007

A general rainfall outflow in urban drainage has early time of concentration because urban drainage areas are most paved area. In general, rainfall outflow is flowed in drainage pump station and is discharged to rivers in urban areas. However it is excluded through drainage pumps about a heavy rainfall which exceed the design rainfall and the rainfall outflows increase the urban inundation risk. A current pump operation is control according to water level of collecting well or reservoir in drain pump station. But recently, the localized downpours are happened frequently in urban drainage and the current pump stations are frequently incapable of the heavy rainfall outflows. In this study, a real urban inundation was simulated and the drain capacity of drain pump station was evaluated by analysis about flood-factor in urban underground passage. Then the analysis about the inundation was done by the simulation about the real rainfall which cause the inundation. Also, in the simulation the inundation risk and the evaluation of flood-factor were analyzed according to change of the pump operation rule.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.501-506
• /
• 2017

Surface morphology and optical properties such as transmittance and haze effect of glass etched by physical and chemical etching processes were investigated. The physical etching process was carried out by pen type sandblasting process with $15{\sim}20{\mu}m$ dia. of $Al_2O_3$ media; the chemical etching process was conducted using HF-based mixed etchant. Sandblasting was performed in terms of variables such as the distance of 8 cm between the gun nozzle and the glass substrate, the fixed air pressure of 0.5bar, and the constant speed control of the specimen stage. The chemical etching process was conducted with mixed etching solution prepared by combination of BHF (Buffered Hydrofluoric Acid), HCl, and distilled water. The morphology of the glass surface after sandblasting process displayed sharp collision vestiges with nonuniform shapes that could initiate fractures. The haze values of the sandblasted glass were quantitatively acceptable. However, based on visual observation, the desirable Anti-Glare effect was not achieved. On the other hand, irregularly shaped and sharp vestiges transformed into enlarged and smooth micro-spherical craters with the subsequent chemical etching process. The curvature of the spherical crater increased distinctly by 60 minutes and decreased gradually with increasing etching time. Further, the spherical craters with reduced curvature were uniformly distributed over the etched glass surface. The haze value increased sharply up to 55 % and the transmittance decreased by 90 % at 60 minutes of etching time. The ideal haze value range of 3~7 % and transmittance value range of above 90 % were achieved in the period of 240 to 720 minutes of etching time for the selected concentration of the chemical etchant.

• Mycobiology
• /
• v.48 no.5
• /
• pp.383-391
• /
• 2020

Use of nanoparticles (NPs) in several commercial products has led to emergence of novel contaminants of air, soil and water bodies. The NPs may exhibit greater ecotoxicity due to nano-scale dependent properties over their bulk counterparts. The present investigation explores the effect of in vitro supplementation of TiO₂, silica and silver NPs on radial growth and ultrastructural changes in the hyphae and spores of two mushroom genera, Ganoderma lucidum and Volvariella volvaceae. A concentration dependent decrease in radial growth on NP amended potato dextrose agar medium was recorded. However, in comparison to control, there was decrease in radial diameter on supplementation with TiO₂ NPs while an increase was recorded for silica and silver NPs amendments as compared to their bulk salts at same concentrations after 48 h of incubation. Optical microscopy studies showed decrease in the number of spores while increase in spore diameter and thinning of hyphal diameter on NPs supplementation. Scanning electron microscopy analysis of fungal growth showed presence of deflated and oblong spores in two fruiting strains of Ganoderma while Volvariella exhibited decreased sporulation. Further, hyphal thinning and branching was recorded in response to NP amendments in both the test mushrooms. Enhancement of protein content was observed on NP compared to bulk supplementation for all cultures, concentrations and hours of incubation except for TiO₂ NPs. Likewise, bulk and NP supplementations (at 100 mg L^-1) resulted in enhanced laccase activity with occurrence of laccase specific protein bands on SDS-PAGE analysis.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.84-90
• /
• 2009

Nitinol alloy (TiNi) has been widely used in vascular stents. To improve the blood compatibility of Nitinol alloy, its surface was chemically modified in this study. Nitinol was first coated with gold, then chemisorbed with L-cysteine (C/N), and followed by grafting of zwitter ionic poly(ethylene glycol) (PEG) (PEG-$N^+-SO_3{^-}$) to produce TiNi-C/N-PEG-N-S. The zwitter ionic PEG grafted on the Nitinol surface was identified by ATR-FTIR, ESCA and SEM. The hydrophilized surface was proven by the decrease of water contact angle. In addition, from the blood compatibility tests such as protein adsorption, platelet adhesion, and blood coagulation time, the surface-modified TiNi alloy exhibited a better blood compatibility as compared to the untreated Nitinol control. These results indicated a feasibility of synergistic effect of hydrophilic PEG and antithrombotic zwitter ion.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.2
• /
• pp.66-77
• /
• 2012

Objectives: This study was designed to investigate the effects of PR on ovarian tissue in PCOS rats through measurement of morphological and histo-pathological observations, ovarian size. In addition, effects on expression levels of Insulin like Growth Factor Receptor(IGFR) were also investigated to elucidate related mechanisms. Methods: PCOS was induced by single intermuscular injection with ${\beta}$-Estradiol 17-Valerate(EV) in female rats. Normal group(NOR, n=8) were injected with sesame oil and administrated hard food for five weeks. Control group(CTL, n=8) were injected with EV and administrated hard food for five weeks. CR group(n=8) were injected with EV and administrated hard food mixed CR for five weeks. Then, we measured weights of body and ovary, uptakes of food and water. And we observed morphological and histo-pathological changes of ovary, levels of IGFR. Results: In this experiments, single injection of Estradiol Valerate(EV) induced suppression of weight gain, formation of cysts, increase of IGFR expression. Oral administration of PR prevent decrease of ovarian size significantly. Further more, formation of cystic follicles induced by EV injection is suppressed by PR treatment. Conclusions: These results suggest PR can be used for patients with PCOS to prevent formation of cystic follicles and malfunction of ovary.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.785-796
• /
• 2009

A KALIMER-600 concept which is a type of sodium-cooled fast reactor, has been developed at KAERI. It uses sodium as a primary coolant and is a pool-type reactor to enhance safety. Also, a supercritical carbon dioxide ($CO_2$) Brayton cycle is considered as an alternative to an energy conversion system to eliminate the sodium water reaction and to improve efficiency. In this study, a simplified model for analyzing the thermodynamic performance of the KALIMER-600 coupled with a supercritical $CO_2$ Brayton cycle was developed. To develop the analysis model, a commercial modular modeling system (MMS) was adopted as a base engine, which was developed by nHance Technology in USA. It has a convenient graphical user interface and many component modules to model the plant. A new user library for thermodynamic properties of sodium and supercritical $CO_2$ was developed and attached to the MMS. In addition, some component modules in the MMS were modified to be appropriate for analysis of the KALIMER-600 coupled with the supercritical $CO_2$ cycle. Then, a simplified performance analysis code was developed by modeling the KALIMER-600 plant with the modified MMS. After evaluating the developed code with each component data and a steady state of the plant, a simple power reduction and recovery event was evaluated. The results showed an achievable capability for a performance analysis code. The developed code will be used to develop the operational strategy and some control logics for the operation of the KALIMER-600 with a supercritical $CO_2$ Brayton cycle after further studies of analyzing various operational events.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.