• 제목/요약/키워드: waste collector

검색결과 28건 처리시간 0.017초

용융기술(熔融技術)을 이용(利用)한 자동차폐촉매(自動車廢觸媒)에서의 백금족(白金族) 금속(金屬) 회수(回收) 연구(硏究) (A study on recovery of Platinum Group Metals(PGMs) from spent automobile catalyst by melting technology)

  • 박현서
    • 자원리싸이클링
    • /
    • 제20권2호
    • /
    • pp.74-81
    • /
    • 2011
  • 자동차 폐촉매로부터 폐촉매 중에 함유되어 있는 백금족 금속(Pt, Rh, Pd)를 회수하는 방법으로는 크게 건식법과 습식법이 현재 이용되고 있다. 본 연구에서는 건식 용융법으로 폐촉매로부터 백금족 금속 회수하기 위한 기초 실험으로 포집금속으로 Fe와 Cu을 사용하여 폐촉매를 용융하였을 때 각각의 농도 변화를 비교함으로써 용융 조건과 적정 포집금속으로 찾는 것을 목적으로 하였다. 본 실험으로 얻어진 결과를 요약하면 Fe을 포집금속으로 히는 것이 Cu을 포집금속으로 사용하는 것보다 회수율 측면에서 유리하였으며, 용융 처리 온도는 $1,500^{\circ}C$에 비교하여 $1,600^{\circ}C$ 용융 하였을 때 슬래그 중 잔류하는 백금족 금속의 농도 변화율이 크게 향상되었다. 용융 온도 $1,600^{\circ}C$의 경우 처리 후 슬래그 중 백금족 원소인 Rh, Pd, Pt의 평균 농도는 각각 6.21 ppm, 5.98 ppm, 6.97ppm으로, 이는 용융 온도 $1,500^{\circ}C$시 보다도 슬래그 백금족 원소 중 Rh와 Pd는 농도변화율 측면에서 각각 50.58%, 55.31%향상되었다. 그러나 폐촉매 중의 Pt의 초기농도가 12.9 ppm으로 낮아 용융처리 후 농도변화율의 비교가 어려웠다.

전기방사를 이용한 리그닌 나노섬유의 제조 (Fabrication of Lignin Nanofibers Using Electrospinning)

  • 이은실;이승신
    • 한국의류학회지
    • /
    • 제38권3호
    • /
    • pp.372-385
    • /
    • 2014
  • Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

중.고등학생 대상 영양교육 현황 분석을 통한 영양교육 주제 도출 (Identifying the Subjects of Nutrition Education for Junior and Senior High School Students)

  • 강여화;양일선;김혜영;이해영
    • Journal of Nutrition and Health
    • /
    • 제37권10호
    • /
    • pp.938-945
    • /
    • 2004
  • The purposes of this study were to survey the present situation of nutrition education in junior/senior high school, to analyze the difference between the favorite subjects on students and the existing subject done by dietitians on nutrition education, and then to identify the subjects of nutritional education for junior/senior high school students. Self-administered questionnaires were given to dietitians and students and 142 of the 200 dietitians (71.0%) and 479 of the 564 students (84.9%) responded to the questionnaire on the nutritional education. According to the survey results, 76.1 % of school dietitians currently were doing nutrition education for students while the other 23.9% didn't have such education programs even though they recognized the necessity strongly. The target of nutrition education was student rather than parents or teacher generally and the principal measuring method for nutrition education effect was change of plate waste and leftover'. It was found that significant difference in the collector and source of nutritional education information between junior and senior high school dietitians (p< .05) . About ninety-eight percentage of dietitians felt that nutrition education should keep pace with meal service and this meant that almost respondent recognized the necessity of nutrition education for students. Because the most serious one among operational problems of nutrition education program was lack of enough time owing to too many affairs as dietitian, junior and senior high schools should support so that dietitians would share enough time for nutrition education. And also, a gap was existed between actual and favorite subjects on nutrition education. Significant differences existed in the following subjects; 'basic concept of food and nutrition', 'disease and nutrition', 'food culture in the world', 'cooking and culinary art', 'food of the 24 divisions of the year in the lunar calendar', 'food waste and environmental issue', 'food habit and food behavior', 'exercise and nutrition' (p< .001) 'table manner', 'food and individual sanitation', 'recommended dietary allowance' (p < .01) and 'menu planning' (p< .05) .Finally, 24 subjects of nutritional education were selected based on the survey results. These subjects would be expected to be able to contribute the effective and interesting nutrition education program for junior and senior high school students.

흡착 교질 포말부선법에 의한 Cobalt Ion의 제거 (Removal of Cobalt Ion by adsorbing Colloidal Flotation)

  • 정인하;이정원
    • 자원리싸이클링
    • /
    • 제7권3호
    • /
    • pp.3-10
    • /
    • 1998
  • 모의폐액으로 제조한 50ppm의 코발트이온을 Fe(III) 및 Al(III)의 응집제와 sodium lauryl sulfate의 계면활성제를 사용하여 흡착 교질 포말부선법으로 제거하였다. 용액의 pH, 계면활성제 농도, Fe(III) 및 Al(III) 농도, 공급기체의 유속 등을 변수로 하여 실험한 결과, Fe(III)를 응집제로 사용한 경우 초기 코발트이온농도 50ppm, pH 8.5, 공급기체유속 $70mell$/min, 제거시간 15분 등의 조건에서 99.8%의 제거율을 나타내었다. 코발트 이온 제거에 앞서 모의폐액에 35% $H_2O_2$를 첨가하여 폐액을 전처리하였다. 그 결과, 최적 pH 및 처리 후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. Fe(III) 50 ppm을 사용하여 코발트이온과 공침시킨 후 20ppm의 Al(III)를 첨가한 결과, Fe(III) 또는 Al(III)를 각각 단독으로 사용하였던 경우에 비하여 제거 가능한 pH 범위가 더욱 더 확대되었다. 이 현상은 zeta potential 의 증가 및 공침효과의 상승요인으로 추측되었다. $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$를 첨가하여 외부이온의 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 코발트용액을 Fe(III) 및 Al(III)를 사용하여 처리한 결과 제거효율은 99%를 나타내었다.

  • PDF

침전 포말부선법에 의한 Cobalt Ion의 제거 (Removal of Cobalt Ions by Precipitate Foam Flotation)

  • 정인하;이정원
    • 자원리싸이클링
    • /
    • 제7권3호
    • /
    • pp.11-16
    • /
    • 1998
  • 모의폐액으로 제조한 50ppm의 코발트이온을 sodium lauryl sulfate 계면활성제를 사용하여 침전 포말부선법으로 제거하였다. 부선법으로 코발트이온을 제거하기 전에 35% $H_2O_2$를 모의폐액에 첨가하여 폐액의 전처리 과정을 도입하였다. 그 겨로가 최적 pH 및 처리후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. 초기 코발트 이온농도, pH, 계면활성제 농도, 부선시간, 공급기체 유속, 외부이온 농도 등을 변수라하여 실험한 결과, 초기 코발트 이온농도 50ppm, pH 9.5, 공급기체 유속 $70m\ell$/min, 부선시간 30분 등의 조건에서 99.8%의 제거율을 나타내었다. 침전물과 계면활성제의 흡착은 zeta potential 뿐만 아니라 침전물의 용해도 및 pH에 따라 변화하는 화학종과의 친화력과도 관계가 되는 것으로 추측되었다. 외부이온으로서 ${NO}_{3}^{-}$, ${SO}_{4}^{2-}$, ${Na}^{+}$, ${Ca}^{2+}$를 첨가하여 그 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 cobalt 용액을 침전 포말부선법으로 처리한 결과 zeta potential의 감소 및 침전방해 등의 이유로 제거효율은 90%를 나타내었다.

  • PDF

광센서를 이용한 제상제어 방법에 대한 타당성 검토 (Feasibility Study on a Defrost Control Method by Using a Photoelectric Sensors)

  • 전창덕;김동선;이승준
    • 한국산학기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.3389-3395
    • /
    • 2014
  • 제상제어 수단으로 사용하고 있는 일정 시간 제어방식, 온도차 제어방식 등은 종종 제상 오작동과 에너지 낭비를 가져오므로 좀 더 정확하게 제상을 제어할 수 있는 방법이 요구되고 있다. 수광부와 발광부로 구성된 광센서를 실외 열교환기 전방에 설치하여 서리의 유무에 따른 출력전압의 변화를 관찰함으로서 정확하게 제상제어를 할 수 있다. 본 연구에서는 기존의 일정시간 제상 방법을 사용하는 경우 나타나는 시스템 성능 및 특성 곡선을 광센서를 사용하여 재현가능한지 판단하기 위해 KS C 9306에 따른 난방 제상능력 시험조건(건구온도 $2^{\circ}C$/습구온도 $1^{\circ}C$)에서 실험을 수행하였다. 실험을 통해 측정한 난방능력, 소비전력, 열교환기 표면온도와 광센서 수광부 출력전압을 비교, 분석한 결과 제상 제어수단으로 광센서의 사용가능성을 확인하였다. 일정시간 제상방법을 통해 구한 제상 제어 단속 주기는 광센서를 통해 측정한 출력 전압의 단속 주기와 잘 일치하였다.

생활쓰레기 소각(燒却)비산재로부터 $CaCO_3$ 제조(製造)에 관한 연구(硏究) (Study on $CaCO_3$ Preparation from MSWI Fly Ash)

  • 최우진;박은규
    • 자원리싸이클링
    • /
    • 제15권5호
    • /
    • pp.47-51
    • /
    • 2006
  • 국내 생활쓰레기 소각시설에서 발생되는 소각재의 양은 2005년 경우 약 420,000톤에 달하고 있으며, 그중 비산재 발생량은 약 68,000톤에 달하고 있다. 비산재는 지정폐기물로 분류되어 일반적으로 고형화 및 안정화 처리 후 매립되고 있으며, 단지 발생량의 약 20%만이 재활용되고 있다. 비산재의 경우 CaO의 함량이 50%까지 이르고 있으며, 그 이유는 배가스 처리시 CaO를 기본으로 하는 물질을 다량으로 사용하기 때문이다. 본 연구에서는 비산재에 함유되어 있는 CaO를 회수하여 $CaCO_3$ 분말을 제조하기 위한 기초실험을 수행하였다. CaO를 선택적으로 용해하기 위하여 설탕용액을 사용하였으며, 기초 실험결과에 의하면 CaO용해를 위한 최적조건은 비산재 농도 10%, 반응시간 15분, 설탕농도 $10{\sim}15%$ 및 적정 pH는 $10.5{\sim}11$로 나타났다. $CaCO_3$ 분말은 회수된 CaO 용해액에 $CO_2$가스를 주입시켜 제조하였으며 회수된 $CaCO_3$ 백색도는 매우 우수한 것으로 조사되었다.

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.