• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.321-326
• /
• 2005

근거리 통신망 LAN(Local Area Network)는 일반적으로 회사, 학교, PC방에서 널리 사용하는 통신 방식으로 Serial, USB 통신방식과 더불어 반드시 습득해야 할 프로토콜 중의 하나로서 앞으로는 이러한 LAN 통신방식을 이용하여 모든 가전기기, 회사 내의 보안장치 등이 모두 유무선 복합적으로 연결되어 휴대폰 또는 PDA로 상태변화를 실시간으로 확인이 가능한 시대가 올 것이다. 본 논문에서는 LAN LSI인 W3100A를 분석해 보고, MCU(Atmega128)과 Phycei ver인 RTL8201과 Interface하여 회로를 구성한 다음, TCP Client 역할을 위한 MCU Programming을 하여 .NET으로 Server 프로그램을 만들어 Server에 데이터를 전송한다. 이와 같이 MCU(Atmega128)을 사용하여 들어온 데이터를 Ethernet Network상으로 데이터의 전송을 가능하게 하는 Ethernet 통신 시스템을 연구하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.991-1001
• /
• 2003

CCFH(Candidatecasting Fast Handoff) algorithm excels the performance of existing fast handoff schemes using multicasting in terms of handoff latency and B/W efficiency. The scheme uses L2 information(BSSID) at Wireless LAN and starts multicasting before L2 handoff. So it can reduce L3 handoff latency. At this article, we would show that Candidatecasting Fast Handoff Scheme is clearly new scheme using L2 information and has the good performance.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2711-2713
• /
• 2001

네트워크는 서버를 유지 운영하기 위한 부수적 요소가 아니라 서버의 한 부분으로서 그 중요성을 더해가고 있으며, 네트워크 자체의 안정성이 서버 전체의 고가용성(HA)을 보장하기 위한 중요한 전제가 되었다. 따라서 네트워크의 속도 및 성능을 향상시키고 고가용성을 보장하기 위한 방법으로, 국지적 네트워크 이중화 방법을 제안한다. 현재의 기술 수준에서의 네트워크 이중화 시도는, 같은 네트워크 안에서 이종 OS와 HW를 갖는 서버들로 구성되는 경우 시스템 구현이 용이하지 않으며, 서버의 기종 또는 해당 플랫폼이 변경될 때마다 보완작업을 하거나 완전히 새로 설계해야 하는 어려움이 있다. 이를 해결하기 위해 본 논문에서는 서버, 혹은 OS의 종류에 독립적인 관점으로 LAN 이중화를 구현하여, 기존의 다중 서버와 함께 네트워크에서의 완전한 HA를 보장할 수 있는 저렴하고 안정적인 H/W 및 관련 S/W 솔루션 개발에 대해 제안하고자 한다.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.121-124
• /
• 2002

The IEEE 802.lla PLCP H/W for Processing efficiently control message between MAC and PHY is designed. Slate machine and clock control according to rate is designed and timing diagram is verified on the FPGA simulation environment.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.5
• /
• pp.547-556
• /
• 2002

This paper was proposed a wave path loss prediction algorithm using multilayer perceptron (MLP) model and wave propagation characteristic parameters for Wireless LAN in indoor radio environments. Receiving power was predicted by calculating indoor path loss in a Wireless LAN that has transmission power of 100mW and frequency of 2.4GHz, and was compared with measured. In the result of measurement shows that there is a difference between predicted and measured receiving power which can be reduced by an accurate analysis of the various path loss factors. In order to fix the access point(AP) positions was used the proposed a wave path loss prediction algorithm, and designed the optimum cell for Wireless LAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.1
• /
• pp.16-24
• /
• 1986

The queueing delay and the response time of model of the buffer insertion LAN have been derived and its performance has been analyzed in terms of the throughput rate-response time characteristic. The results show that the response time can be improved by increasing the medium data rate, and that it can be reduced by 0.7 msec by transmitting the acknowledgement signal at the network interface unit(NIU) rather than at the hose, when the channel utilization is approximately 0.8. Also, implementation of the buffer insertion protocol has been studied.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.894-897
• /
• 2003

Recently, the rapid growth of mobile radio system has led to an increasing demand of low-cost high performance communication IC's. In this paper, we have designed RF front end for wireless LAN receiver employ zero-IF architecture. A low-noise amplifier (LNA) and double-balanced mixer is included in a front end. The zero-IF architecture is easy to integrate and good for low power consumption, so that is coincided to requirement of wireless LAN. But the zero-IF architecture has a serious problem of large offset. Image-reject mixer is a good structure to solve offset problem. Using offset compensation circuit is good structure, too. The front end is implemented in 0.25 ${\mu}m$ CMOS technology. The front end has a noise figure of 5.6 dB, a power consumption of 16 mW and total gain of 22 dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.77-82
• /
• 2006

Analog channel selection filter is described which is designed for a direct-conversion receiver of a IEEE 802.11a wireless LAN. The channel selection filter is an active-RC fifth-order Chebyshev filter with 10MHz cut-off frequency. Two-stage operational amplifier of the filter employs a current re-using feedforward frequency compensation scheme to minimize the power consumption. The filter has been implemented in a 0.18mm CMOS technology and the experimental results show 20mW power consumption with 1.8V supply voltage and 19dB out-of-band iIP3.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.961-968
• /
• 1996

In the frame of Koreasat Project, it has been identified the task to implement a pilot satellite network module to provide LAN-to-LAn in ground system for satellite links. The pilot network will support an experiment to verify the performances of the considered applications through a satellite.This paper proposes a satellite-LAN interconnecting architecture making full use of satellite benefits and counteracting satellite demerits. The architectureprovides high quality data transmission and high perfrmance for satellite bit errors by using a connection- oriented satellite protocol which can establish multiple logical links between two nodes. As a protocol conversion method, router-type interconnection was selected to guard against problems. Based on this architecture, a satellite LAN interconnecting system has been designed, which includes a 1.8 meter antenna with a 4 watt transceiver, a satellite modem and the developed satellite network interface. The system can support high speed transmission rates of up to 1.544 Mbs and superior network management as well.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1477-1486
• /
• 2013

In this paper, Implementation of location estimation system using wireless communication technology based on Zigbee. Using wireless communication technology, calculation more accurate location information and service location information to the H/W and S/W has been developed. Receivers, repeaters, smart tag(location device), was developed for implement a location estimation system. The smart tag is built the 120~130KHz, 13~14MHz, 2.0~3.0GHz radio frequency tag. Receiver and repeater is applied to the tag module to recognize the location device's active RFID tags transmit a wireless signal for tag identification. Common Entrance control system in contact with a smart tag, It was implemented to transfer the value of the tag to the access control server over a LAN.