• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.60-66
• /
• 2019

Many researches have been performed on hybrid fiber reinforced concrete for years, which is to improve some of the weak material properties of concrete. Researches on characteristics of hybrid fiber reinforced concrete using amorphous steel fiber and organic fiber, however, yet remain to be done. Therefore, the purpose of this research is to estimate the compressive strength, long term drying shrinkage, and resistance to freezing and thawing of hybrid fiber reinforced concrete(HFRC) using amorphous steel fiber and polyamide fiber as one of organic fibers. For this purpose, HFRCs containing amorphous steel fiber and polyamide fiber were made according to their total volume fraction of 1.0% for target compressive strength of 40 and 60 MPa, respectively, and then the compressive strength, length change, and resistance to freezing and thawing of these were evaluated. As a result, the long term length change ratio of HFRC used in this study decreased by more than 30%, 25% than plain concrete at 365 and 730 days, respectively, and the durability factor of HFRC was very excellent as more than 90%.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.5
• /
• pp.567-574
• /
• 2001

Objective : As for growth hormone(GH) secreting pituitary adenoma, it's remission should be declared on the basis of satisfactory controlling of the tumor, normalization of hormonal level, and symptomatic improvement of the patient. Several modalities of treatment have been applied and administered, and yet, this disease still remains as inveterate one to be fully treated. The purpose of this study is to evaluate the outcome of gamma knife radiosurgery(GKRS) for GH secreting pituitary adenoma, and to identify various factors affecting the outcome of the treatment. Method : A group of 24 out of 35 patients, treated by Leksell gamma knife unit during the period of March of 1992 through October of 1997, had been observed for more than two years. The mean target volume of microadenoma was $449.3mm^3(range 216-880mm^3)$, and that of macroadenoma was $3183.1mm^3(range 1456-13125mm^3)$. The tumor margin was covered with 50% isodose profile, and mean marginal dose was 25.2Gy(range 15-32.4Gy). The mean number of isocenter was 4.3(range 1-6). The exposed dose to the optic apparatus was less than 8Gy. The mean follow-up period was 37.8months(range 24-102months). Result : No patients showed any increase in the tumor volume during the follow-up period. And definite shrinkage of tumor volume(tumor volume reduction rate, TVRR : more than 50%) was obtained in 10 patients(41.7%). Twenty one patients(87.5%) had reduced hormonal level compared than pre-treatment level. Among them, normalization of the hormonal level was achieved in 12 patients(50%). Clinicoendocrinological remission was seen in 3 patients (12.5%). According to the results of statistical analysis, tumor volume(p=0.016),duration of symptoms(p=0.046), initial GH level(p=0.017), and the invasion of cavernous sinus(p=0.036) were significantly favorable to post-radiosurgical outcome. The TVRR was significantly related to post-radiosurgical reduction of serum GH level. Permanent complication was not seen. Conclusion : The authors concluded that GKRS is a safe and effective treatment modality for acromegaly. To otain the better outcome of GKRS in GH secreting pituitary adenoma, more careful and sophisticated treatment-planning is recommended.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.1
• /
• pp.319-323
• /
• 2012

Objective: To explore the feasibility of shrinking field technique after 40 Gy radiation through 18F-FDG PET/CT during treatment for patients with stage III non-small cell lung cancer (NSCLC). Methods: In 66 consecutive patients with local-advanced NSCLC, 18F-FDG PET/CT scanning was performed prior to treatment and repeated after 40 Gy. Conventionally fractionated IMRT or CRT plans to a median total dose of 66Gy (range, 60-78Gy) were generated. The target volumes were delineated in composite images of CT and PET. Plan 1 was designed for 40 Gy to the initial planning target volume (PTV) with a subsequent 20-28 Gy-boost to the shrunken PTV. Plan 2 was delivering the same dose to the initial PTV without shrinking field. Accumulated doses of normal tissues were calculated using deformable image registration during the treatment course. Results: The median GTV and PTV reduction were 35% and 30% after 40 Gy treatment. Target volume reduction was correlated with chemotherapy and sex. In plan 2, delivering the same dose to the initial PTV could have only been achieved in 10 (15.2%) patients. Significant differences (p<0.05) were observed regarding doses to the lung, spinal cord, esophagus and heart. Conclusions: Radiotherapy adaptive to tumor shrinkage determined by repeated 18F-FDG PET/CT after 40 Gy during treatment course might be feasible to spare more normal tissues, and has the potential to allow dose escalation and increased local control.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.33-40
• /
• 2009

In earthwork projects, the designer considers cut and fill balance for minimizing earthwork which may significantly decrease construction costs. Despite carrying out considerable earthwork design, the decrease in volume of earth occurs in construction sites because of embankment settlement under self-weight, consolidation settlement of soft ground, cavity filling and soil loss due to rainfall-runoff. To reflect the decrease in volume of earth, the specifications for road construction just give shrinkage factors in embankment for soils without consideration of embankment settlement under self-weight. In this study, the computational method is used to estimate the amount of embankment settlement under self-weight developed by Iseda (1972) and Ishii (1976). This research shows that the total compression settlements are between 3 to 10 percent of embankment height according to the property of embankment material and embankment height. As a result, the designer should consider the compression settlement on embankment material under selt-weight.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.656-669
• /
• 2018

Tropical bamboo species, which have a very rapid growth rate, are considered as a promising non-timber forest product capable of exhibiting new functionality by carbonization technology. This study was conducted to compare the characteristics of carbonized bamboos from Andong (G. pseuudoarundinacea (Steudel) Widjaja), Hitam (G. atrovialacea), Tali (G. apus), Kuning (B. vulgaris Var. striata (Lodd. Ex Lindl)), and Ampel (B. vulgaris Scharad. ex Wendland), and Betung (D. asper). Each bamboo was carbonized at 200, 400, 600, 800, and $1,000^{\circ}C$, respectively, and their physical and anatomical characteristics were investigated. The result showed that the volume and weight of carbonized bamboo decreased with increasing carbonization temperature and showed the substantial changes of volume and weight between 200 and $400^{\circ}C$. The highest and the lowest density of carbonized samples were found in Ampel bamboo and Betung bamboo, respectively. The density of all carbonized bamboos tended to decrease after carbonization at 200 and $400^{\circ}C$ and relatively become constant afterwards. The carbonized bamboo prepared at 800 and $1,000^{\circ}C$ showed better refining degree. The results of the anatomical observation showed that the vascular diameter of carbonized bamboo decreased with increasing carbonization temperature, and the shrinkage in radial and tangential direction showed similar tendency. Statistical analysis showed that there was significant correlation between physical contraction and anatomical contraction. Based on the results of this study, comprehensive data about Indonesian bamboo charcoals could be obtained and it will be useful for future application studies.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.73-82
• /
• 2003

Recently, PWB(Printed Wiring Board) has been recognized in the field of microelectronic package as core technology for designing or manufacturing. PWB is the structure stacked by several materials with different thermophysical properties, which shows the different CTEs(Coefficient or Thermal Expansions) during the fabrication process and causes a lot of defects such as warpage, shrinkage, dimension, etc. Thermal deformation of PWB is affected mainly by the volume change of solder-resist among fabrication parameters. Therefore, thermal deformation of PBGA and CSP consisting of 2 layers and 4 layers was studied with solder-resist process. When over 30% in volume fraction of solder-resist, thermal deformation of 2-layered PWB was min. 40% higher than that of 4-layered PWB because 4-layered PWB contained the layer with high toughness such as prepreg, which counterbalanced the thermal deformation of solder-resist. Otherwise, when below 30%, PWB showed similar thermal deformation without regard to layers and design.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.157-164
• /
• 2016

In this research, based on the condition of using desulfurization gypsum(FGD) as a stimulator for high-volume blast furnace slag cement mortar, sieving and heating process methods of removing activated carbon in FGD were compared with the non-processed FGD and recycled and natural fine aggregates were compared for suitable aggregate to be used. According to the result of experiment, sieving with 0.3mm was more efficient than $500^{\circ}C$ heating for processing the FGD, and recycled fine aggregate showed more favorable result than natural fine aggregate at the FGD content was 5 to 10%. On the other hand, the mortar mixture including recycled fine aggregate had a high drying shrinkage, and absorption ratio, and thus specific limitations on applying recycled fine aggregate should be required.

• Korean Journal of Materials Research
• /
• v.13 no.3
• /
• pp.137-143
• /
• 2003

The air gap between the metal and mold, formed by shrinkage during solidification, causes surface and subsurface cracks in the continuous casting process. Molten crack on the surface might also occur due to improper heat transfer between them. In order to compensate the air gap in mold design, the thermal contraction is an essential factor. In this study, the thermal contraction and expansion behaviors were examined from the ($\alpha$ and pearlite)/${\gamma}$ to ${\gamma}$/$\delta$ transformations in continuous casting steels by the commercial dilatometer and the self- assembled dilatometer with laser distance measurement. It was found that the thermal contraction and expansion behaviors were very dependant on the phase transformation of the ${\gamma}$/$\delta$ as well as ($\alpha$ and pearlite)/${\gamma}$. The sudden volume change from $\delta$ to ${\gamma}$ which might cause cracks in the continuous casting process, was observed on cooling just below the melting temperature by the self-assembled dilatometer.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.1 s.23
• /
• pp.91-98
• /
• 2007

In this study, the property and plastic cracking pattern of concrete were compared and analyzed with the replacement ratio of fly ash 0, 5, 10, 15, 20% by cement weight. And curing conditions of concrete were given variously such as indoors(with wind speed as 0, 300, 500m/min), outdoors and chamber. The hydration temperature had a tendency to decrease as the replacement ratio of fly ash increased, and in the case of the wind speed 0m/min, it was showed that the moment that the amount of evaporation of water from surface of reference concrete was more than the volume of bleeding was 90 min since casting concrete. The time that the crack initiated had a tendency to be more quickly as the replacement ratio of fly ash increased. The number, length, width and area of crack in the indoor curing, exposed outdoor curing, enclosed outdoor curing had a tendency to decrease as the replacement ratio of fly ash increased. The crack had a tendency to decrease in sequence of exposed outdoor, enclosed outdoor curing, indoors curing. The outbreak of cracking by the change of temperature and humidity was affected by relative humidity more than temperature and the cracking had a tendency to increase as relative humidity lowered.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.819-828
• /
• 2011

Due to emergence of large discount mart and on-line shopping, and the resulting shrinkage of market share, traditional market that is typically having operational disadvantages is facing a predicament. However, considering the total sales volume and the consumer traffic, it is true that traditional market still plays an important role. In this context, traditional market should be vitalized through an improved management system as well as restructuring, and seek a balanced growth in the distribution industry. In order to provide competitiveness to the local traditional market of Jeung-Pyung Province and to vitalize the local economy, an analysis was preformed for the local market environment, and the vitalization plans, which can be referenced in determining the local economic policies, are suggested in this paper.