• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.99-102
• /
• 2002

The present study describes a numerical analysis for simulation of the sloshing of flows with free-surface which contained in a rectangular tank The SOLA-VOF (Volume of fluid) method uses a fixed mesh for calculating the motion of flow and the free-surface. This Eulerian approach enables the VOF method to use only a small amount of computer memory for simulating sloshing problems with complicated free-surface contours. The VOF function, representing the volume fraction of a cell occupied by the fluid, is calculated for each cells, which gives the locating of the free-surface filling any some fraction of cells with fluid. Using SOLA-VOF method, the study describes visualization about simulation of the sloshing of flows and damping effect by baffle. Translation and pitching motion of the forms have been investigated The time-dependent changes of free-surface height are used for visualization subject to several conditions such as fluid height horizontal acceleration, sinusoidal motion, and viscosity. The free-surface heights were used for comparing wall-force, which is caused by sloshing of flows. Baffle was Installed to reduce the force on the wall by sloshing of flows. Damping effects was extensively expressed under the conditions such as baffle shape and position.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.431-440
• /
• 2018

Fluid velocity analysis on the instability of pipes reinforced by silica nanoparticles ($SiO_2$) is presented in this paper. Mori-Tanaka model is used for obtaining the effective materials properties of the nanocomposite structure considering agglomeration effects. The well known Navier-Stokes equation is used for obtaining the applied force of fluid to pipe. Based on the Reddy higher-order shear deformation theory, the motion equations are derived based on energy method and Hamilton's principal. The frequency and critical fluid velocity of structure are calculated using differential quadrature method (DQM) so that the effects of different parameters such as volume fractions of SiO2 nanoparticles, SiO2 nanoparticles agglomeration, boundary conditions and geometrical parameters of pipes are considered on the nonlinear vibration and instability of the pipe. Results indicate that increasing the volume fractions of SiO2 nanoparticles, the frequency and critical fluid velocity of the structure are increased. Furthermore, considering SiO2 nanoparticles agglomeration, decreases the frequency and critical fluid velocity of the pipe.

• 천문학회지
• /
• 제34권4호
• /
• pp.237-241
• /
• 2001

Our goal is to present a simple volume-of-fluid type interface-tracking algorithm to compressible two-phase flow in two space dimensions. The algorithm uses a uniform underlying Cartesian grid with some cells cut by the tracked interfaces into two subcells. A volume-moving procedure that consists of two basic steps: (1) the update of volume fractions in each grid cell at the end of the time step, and (2) the reconstruction of interfaces from discrete set of volume fractions, is employed to follow the dynamical behavior of the interface motion. As in the previous work with a surface-tracking procedure for general front tracking (LeVeque & Shyue 1995, 1996), a high resolution finite volume method is then applied on the resulting slightly nonuniform grid to update all the cell values, while the stability of the method is maintained by using a large time step wave propagation approach even in the presence of small cells and the use of a time step with respect to the uniform grid cells. A sample preliminary numerical result for an underwater explosion problem is shown to demonstrate the feasibility of the algorithm for practical problems.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.16-22
• /
• 2010

In this paper, the diffraction problems for fixed offshore structures are solved using a hybrid scheme. In this hybrid scheme, potential-based solutions and the Navier-Stokes-based finite volume method (FVM) with a volume-of-fluid (VOF) method are combined. We introduce a buffer zone for efficient wave-making and damping. In this buffer zone, the near field solution from FVM-VOF is gradually changed to Stokes' 2nd order wave solutions. Three different models, including the truncated cylinder, sphere, and wigleyIII model, are numerically investigated in regular waves with a wave steepness of 1/30. The efficiency and accuracy of the hybrid scheme are numerically validated from results using different domain sizes and buffer zones. The wave exciting forces from the FVM-VOF simulations are compared with experiments and potential-based solutions from the higher-order boundary element method (HOBEM). This comparison shows good agreement between the hybrid scheme and potential-based solutions.

• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.513-523
• /
• 2014

유체이송 기술은 최근 마이크로 유체시스템 개발에서 핵심문제로 인식되고 있다. 본 연구에서는 최근 저자가 제안한 외부동력을 사용하지 않고 액적을 이송시킬 수 있는 새로운 개념인 친수성/소수성 수평 표면에서의 액적이송을 자체개발 코드(PowerCFD)를 사용하여 수치해석하였다. 수치해석에 사용된 코드는 보존적인 압력기반 유한체적방법에 기초한 비정렬 셀 중심 방법 및 VOF 방법에 체적포착법인 CICSAM을 채용하고 있다. 액적 내 및 주위의 속도벡터, 압력분포 및 전체운동에너지와 같은 수치해석 결과를 제시하고 이 결과들을 통해 액적이송 메커니즘을 규명하였다.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.263-270
• /
• 2014

유체이송 기술은 최근 마이크로 유체시스템 개발에서 핵심문제로 인식되고 있다. 본 논문에서는 외부동력을 사용하지 않고 액적을 이송시킬 수 있는 새로운 개념을 제안하고, 수치해석을 통해 증명하였다. 제안된 장치는 표면을 단순하게 친수성과 소수성 표면의 복합표면으로 구성하는 것이다. 새로운 개념을 입증하기 위한 수치해석은 보존적인 압력기반 유한체적방법에 기초한 비정렬 셀 중심 방법 및 VOF 방법에 체적포착법인 CICSAM을 채용하고 있는 자체개발 코드(PowerCFD)를 사용하였다. 연구결과 본 연구에서 제안된 개념이 마이크로 유체시스템에서 액적이송에 대해 우수한 성능을 나타내는 것으로 확인되었다.

• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.281-292
• /
• 2019

In this paper, analysis of critical fluid velocity and heat transfer in the nanocomposite pipes conveying nanofluid is presented. The pipe is reinforced by carbon nanotubes (CNTs) and the fluid is mixed by $AL_2O_3$ nanoparticles. The material properties of the nanocomposite pipe and nanofluid are considered temperature-dependent and the structure is subjected to magnetic field. The forces of fluid viscosity and turbulent pressure are obtained using momentum equations of fluid. Based on energy balance, the convection of inner and outer fluids, conduction of pipe and heat generation are considered. For mathematical modeling of the nanocomposite pipes, the first order shear deformation theory (FSDT) and energy method are used. Utilizing the Lagrange method, the coupled pipe-nanofluid motion equations are derived. Applying a semi-analytical method, the motion equations are solved for obtaining the critical fluid velocity and critical Reynolds and Nusselt numbers. The effects of CNTs volume percent, $AL_2O_3$ nanoparticles volume percent, length to radius ratio of the pipe and shell surface roughness were shown on the critical fluid velocity, critical Reynolds and Nusselt numbers. The results are validated with other published work which shows the accuracy of obtained results of this work. Numerical results indicate that for heat generation of $Q=10MW/m^3$, adding 6% $AL_2O_3$ nanoparticles to the fluid increases 20% the critical fluid velocity and 15% the Nusselt number which can be useful for heat exchangers.

• The Korean Journal of Physiology
• /
• 제3권1호
• /
• pp.1-9
• /
• 1969

Relationships between red ceil volume $(^{51}Cr-cell)$, total blood volume (red cell volume divided by hematocrit ratio), and extracellular fluid volume (SCN distribution space) and body weight (ranging between 73 and 384 grams) or lean body mass were studied in 59 nembutalized rats. Lean body mass was determined by means of underwater weighing method on rats clipped and eviscerated. There were positive correlations between body weight or lean body mass and the absolute values (in milliliters) of body fluid volumes. Body fluid volumes expressed on the body weight or lean body mass basis, however, showed negative correlations between body weight (grams) or lean body weight (grams) with one exception. Red cell volume expressed as % lean body mass showed a positive correlation with lean body mass. The other results are summarized as follows: 1. Body density of rats was 1.0561 $(range:\;1.0123{\sim}1.0781)$ and 19.8% body weight of total body fat was obtained. The mean value of lean body mass was 80.2% body weight 2. The correlation between body weight and lean body mass was high, namely, coefficient of correlation was r=.99. 3. The correlation between the absolute value of red cell volume (ml) and body weight showed a high correlation, namely, r= 92 and between the lean body mass coefficient of correlation was r=.93. On a weight basis, red cell volume was 2.67 ml/100 gm body weight or 3.48 ml/100 gm lean body mass. The coefficient of correlation between body weight (grams) and red cell volume (% body weight) was r=-. 30. The coefficient of correlation between lean body mass (grams) and red cell volume (% lean body mass) was r=. 50. Thus, the following regression equation was obtained. Red cell volume (% lean body mass)=. 00243 Lean body mass (gm)+3. 12. 4. Total blood volume was 6.06% body weight or 7.83% lean body mass. The correlation between these blood volume values and body weight or lean body mass were negative, namely, r= -.43 and r=-.42 respectively. 5. Extracellular volume (SCN space) was 30.0% body weight or 37.2% lean body mass. These percentage values showed negative correlations between body weight or lean body mass and coefficients of correlation were r=-.40 and r=-.54 respectively. 6. The rate of increase in body weight or lean body mass is accompanied by a smaller rate of increase in blood volume and extracellular fluid volume. The rate of increase in red ceil volume paralled that of lean body mass.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.723-733
• /
• 2011

본 연구에서는 비정렬격자계와 체적포착법을 사용하여 표면장력이 지배적인 다상유동의 수치해석 방법을 제시하였다. 먼저 표면장력에 대한 CSF(Continuum Surface Force) 모델을 비정렬격자계에 적용할 수 있도록 수치해석 방법을 확립시켜 Myong(2009)이 개발한 비정렬격자계와 체적포착법을 사용한 수치 해석코드에 삽입하였다. 테스트 문제로 오직 표면장력만이 존재하는 평형상태의 정적(static) 액적 및 비평형상태의 동적(dynamic) 액적 문제에 적용하여, 이 해석방법의 유용성과 정확도를 평가하였다. 연구결과, 매끄러운 곡률 계산을 위해 필요한 필터로 본 연구에서 제안한 Laplacian 필터와 함께 CSF 모델로는 밀도보정(density-scaled)한 CSF 모델이 예측성능이 우수한 것으로 나타났다. 또한 표면장력 계산을 위한 이 모델을 채용한 본 수치해석방법은 표면장력이 지배적인 다상유동인 평형상태의 정적 액적 및 비평형상태의 동적 액적 문제 모두에 대해 정확성과 유용성이 입증되었다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제19권3호
• /
• pp.1-11
• /
• 2013

FLIP 기반의 유체 시뮬레이션은 품질에 대비 높은 효율을 자랑하기 때문에 Visual Effect(VFX)산업에 널리 사용되고 있다. FLIP 기술에서는 바다와 같은 대규모의 물을 시뮬레이션 할 때 시각적으로 중요하지 않은 물의 안쪽까지도 파티클을 할당해야 하기 때문에 보이는 파티클보다 보이지 않는 파티클의 개수가 훨씬 많은 경우에는 시뮬레이션 작업의 효율성이 떨어진다. 본 논문에서는 이러한 단점을 보완하기 위하여 레벨셋 (Level Set)과 Fluid Implicit Particle(FLIP) 기반의 유체 시뮬레이션 기법을 혼합(hybrid)한 효율적인 유체 시뮬레이션 기법을 제안한다. 파티클들을 물의 안쪽 표면 근처의 얇은 층에만 배치함으로써 사용되는 파티클의 갯수를 줄여서 결과적으로 시뮬레이션의 효율성을 크게 높일 수 있었다. 또한 [1]의 표면 재구성 기법과 moving least squares(MLS) [2] 기법을 결합한 새로운 유체 표면 재구성 기법을 적용하여 FLIP을 통해 격자(Grid) 기반 시뮬레이션에서 발생하는 수치적 소실을 줄이고 동시에 유체의 부드러운 표면을 유지할 수 있다. 본 논문의 혼합 시뮬레이션 기술은 높은 품질의 유체 시뮬레이션을 효율적으로 수행하여 다양한 규모의 유체를 표현할 수 있었다.