• Journal of Korean Neurosurgical Society
• /
• 제67권4호
• /
• pp.477-482
• /
• 2024

This report introduces a simple method to visualize the captured thrombus in real-time during suction thrombectomy using "contrast-in-stasis technique". It enables visualization of the thrombus captured by a suction catheter as it is being retrieved through the tortuous course of the carotid artery eventually into the guiding catheter. It also offers visual identification of important findings such as fragmentation of thrombus into pieces or loss of thrombus during retrieval, and, therefore, helps clinicians to make further critical decisions during the procedure.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.10-13
• /
• 2004

The PSP(pressure sensitive paint) technique has recently received a large attention as a new revolutionary optical method to measure absolute pressure distribution on a model surface. The PSP technique can be applied to quantitatively investigate flow structure using a CCD camera and image processing technique. In the static calibration, the luminescent intensity of PSP coatings was measured from 0kPa to 11kPa with 0.5, 1, 2kPa increments. In this study, the low-pressure PSP technique was applied to an oblique impinging jet to measure pressure field variations on the impingement plate with varying angle of an oblique jet. The flow structure over the impingement plate was visualized using a surface tracing method. As a result, the detail pressure field distributions of the oblique low-speed impinging jet were visualized effectively using the PSP technique.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1361-1367
• /
• 2013

This paper describes and suggests the data visualization for real time power system operation based on energy management system. Because real time power system operation performs analysis of the vast amount of on-line data, the operators need intuitive data visualization to find out useful information in the big data. Especially, in emergency situation, the data visualization is able to assist the operators in handling the crisis quickly and efficiently. Therefore, this paper aims to improve displays of output of real time power system operation by visualizing on-line big data. Through this study, we can develop improved visualization technique for real time power system operation, which has highly readable displays of output and intuitive information.

• 비파괴검사학회지
• /
• 제29권3호
• /
• pp.207-213
• /
• 2009

This paper reports an effort to develop 3D tooth visualization system from CT sequence images as a part of the non-destructive evaluation suitable for the simulation of endodontics, orthodontics and other dental treatments. We focus on the segmentation and visualization for the individual tooth. In dental CT images teeth are touching the adjacent teeth or surrounded by the alveolar bones with similar intensity. We propose an improved level set method with shape prior to separate a tooth from other teeth as well as the alveolar bones. Reconstructed 3D model of individual tooth based on the segmentation results indicates that our technique is a very conducive tool for tooth visualization, evaluation and diagnosis. Some comparative visualization results validate the non-destructive function of our method.

• 지질공학
• /
• 제12권2호
• /
• pp.179-188
• /
• 2002

최근 컴퓨터 성능 및 컴퓨터 가시화 기술의 발달에 힘입어 지반공학 분야의 지반조사결과를 가시화 할 수 있는 소프트웨어들이 출시되고 있다. 지반조사의 중요한 목적 중 하나는 건설대상 부지 내에 분포하는 건설에 불리하게 작용하는 불확실성을 예측하고 파악하는 것이다. 이들 불확실성은 시공의 안정성을 떨어뜨릴 뿐만 아니라 공기를 지연시키고 공사비를 증가시킨다. 3차원 가시화 기법은 이러한 지반의 불확실성을 극복할 수 있는 좋은 도구중 하나이다. 본 논문에서는 터널설계 및 시공분야에 3차원 가시화 기술, GIS 기술, 데이터베이스 기술을 적용하기위하여 새롭게 개발된 시스템을 소개한다. 가상현실과 3차원 가시화 기술은 지반구조 및 특성을 3차원 모델화 하는데 사용되었으며, 데이터베이스 기술과 GIS 기술을 접목하여 지반조사와 터널시공 중에 획득되는 지반정보를 데이트베이스화 하였다. 본 시스템을 이용함으로서 초목 엔지니어는 설계단계에서 계획을 세울 때 지반조사 정보를 유용하게 이용할 수 있고, 시공단계에서 공사의 안정성 및 경제성을 극대화시킬 있을 것이다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.74-79
• /
• 2005

The tribrachial flame in laminar coflow jet has been investigated experimentally with unsteady propagating condition. With adopting various visualization techniques, including OH-PLIF, Rayleigh Scattering technique, it was confirmed that the location of tribrachial point is on the inclined surface of flame and the propagation speed of tribrachial flame was significantly affected by the velocity gradient.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1370-1376
• /
• 2003

The investigation of liquid fuel film on the cylinder liner is an essential to understand the engine-out hydrocarbon emissions formation in SI engines. In this research, two-dimensional visualization was carried out to investigate the liquid fuel film on the quartz liner in the optical engine. For this, the optical engine with hydraulic system was designed based on the commercial SI engine. The visualization was based on the laser-induced fluorescence with total reflection technique. Using a quartz liner and a special lens, only the liquid fuel film on the liner was visualized. With using this technique, the distribution of the fuel film on the cylinder liner was measured for different engine conditions and injection timing in the optical engine.

• 한국가시화정보학회지
• /
• 제3권2호
• /
• pp.3-13
• /
• 2005

The optical patterantor provides the high resolution and quantitative information of the spray. Fuel distribution and Sauter Mean Diameter (SMD) can be measured from fluorescence and Mie-scat-tering images. To correct the attenuation of the laser beam and signal in dense spray region, the method to find the geometric mean of the signal intensities obtained from two cameras was evaluated and verified in a solid-cone spray. In high pressure environment, the increased number density of the droplets cause multiple scattering. The optical patternation technique using a laser beam instead of a laser sheet was applied to minimize the multiple scattering problem. The pattern of a coaxial spray was changed from hollow-cone to solid-cone shape, and the spray angle was reduced as the ambient pressure increased from 0.1 to 4.0 MPa.

• 한국가시화정보학회지
• /
• 제7권1호
• /
• pp.21-28
• /
• 2009

The study of swirling flow is of technical and scientific interest because it has an internal recirculation field, and its tangential velocity is related to the curvature of streamline. The fluid flow for tubes and elbow of heat exchangers has been studied largely through experiments and numerical methods, but studies about swirling flow have been insufficient. Using the particle image velocimetry(PTV) method, this study found the time averaged velocity distribution with swirl and without swirl along longitude sections and the results appear to be physically reasonable. In addition, streamwise mean velocity distribution was compares with that of other. Furthermore, other experimental investigation was performed to study the characteristics of turbulent water flow in a horizontal circular tube by using liquid crystal. 2D PIV technique is employed for velocity measurement and liquid crystal is used for heat transfer experiments in water. Temperature visualization was made quantitatively by calibrating the colour of the liquid crystal versus temperature using various approaches.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2008년도 연합학회학술대회
• /
• pp.211-224
• /
• 2008

As a lot of information and media are given to users in Internet space nowadays, users feel disoriented or "lost in space" intensively. So it is suggested that we have the system to reduce information overload and to propose effective and efficient information. In this study we present a visualizing technique which uses fisheye views on data adjacency to combine global context and local details for presentation of many results in limited space. Data Adjacency on graph theory is applied to set up degree of interest which is main focus in fisheye views. Graph theory is useful to solve the problem resulted from various combinational optimization, especially it has advantages to analyze issues in information space like Internet. To test the usability of the proposed visualization technique, we compared the effectiveness of different visualization techniques. Results show that our method is evaluated with respect to less time and high satisfaction for a task accomplishment.