References
- Shin, Y., Cheng W. K., and Heywood, J. B., 1994, 'Liquid Gasoline Behavior in the Engine Cylinder of SI Engine,' SAE paper 941872
- Meyer, R. and Heywood, J. B., 1997, 'Liquid Fuel Transport Mechanism into the Cylinder of a Firing Port Injected SI Engine During Start Up,' SAE paper 970865
- Kelly-Zion P. L., Styron, J. P., Lee, C. F., Lucht, R. P., Peters, J. E., and White, R. A., 1997, 'In-Cylinder Measurements of Liquid Fuel During the Intake Stroke of a Port-Injected Spark Ignition Engine,' SAE paper 972945
- Saito K., Sekiguchi K., Imatake N., Takeda K., and Yaegashi T., 1995, 'A New Method to Analyze Fuel Behavior in a Spark Ignition Engine,' SAE paper 950044
- Alkidas, A. C., and Drews, R. J., 1996, 'Effects of Mixture Preparation on HC emissions of a SI Engine Operating Under Steady-State Cold Conditions,' SAE paper 961958
- Stanglmaier, R. H., Li, J. and Matthews, R. D., 1999, 'The Effect of In-Cylinder Wall Wetting Location on the HC Emissions from SI Engines,' SAE paper 1999-01-0502
- Dawson, M. and Hochreb, S., 1988, 'Liquid Fuel Visualization Using Laser-Induced Fluorescence During Cold Start,' SAE paper 982466
- Stanglmaier R. H., Hall M. J., and Mattews R. D., 1997, 'In-Cylinder Fuel Transport During the First Cranking Cycles in a Port Injected 4-Valve Engine,' SAE paper 970043
- Cho H., Kim M., and Min K., 2001, 'The Effect of Liquid Fuel on the Cylinder Liner on Engine-Out Hydrocarbon Emissions in SI Engines,' 2001 SAE Transactions, Vol. 110, Journal of Fuels & Lubricants, Section 4, pages 1600-1607