• Journal of Korean Society of Rural Planning
• /
• v.17 no.2
• /
• pp.1-11
• /
• 2011

This research selected The Old Rectory, Sissinghurst and East Lambrook Manor as a case study location that is meaningful to discuss potager garden, herb garden and harvest garden, which is a topic of productive garden. This research focuses on the growth potential of Korea's rural house into a garden that embellishes decoration and appreciation. The application method through the interpretation of the case study location will be, first, organizing the shape of the flower bed and then adding additional materials along with the main materials. Second, it can increase the appreciation of productive garden through layering method and making it abundant. Third, it can be utilized well by pursuing artistic feature by combing unique color and texture of edible plants. Lastly, for the weakness of flat structure by short edible plants, vertical structure shall be utilized to provide decoration and frame. Also, by using natural materials, the ambiance of the garden can be presented.

• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.210-216
• /
• 2009

Springback, an elastic material recovery after the unloading of stamping tools, causes variations and inconsistencies of final part dimensions. Recently, narrow and long surround molding parts around door frame are applied to high grade automobiles, but there are great difficulties in their die development, construction and tryout because of several springback modes including vertical movement and twist during flange forming process of them. So it is very important to predict springback's quantities of a surround molding part and, moreover, to compensate the die for them adequately, when they can't be corrected by the restrike operation. This paper presents a case study based on the die design for a surround molding part made of stainless steel. The forming and springback predictions, carried out using PAMSTAMP 2G, are reported and compared with the measurement data of the prototype. The predicted springback results were acceptable, so the processes of compensating die using Automatic Die Compensation Module of PAMSTAMP 2G were performed iteratively until the tolerances between the designed shape and the simulation data were satisfied.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.234-241
• /
• 2002

The depth electrode technique, especially using the occipito-temporal route is widely used in the clinic, since it is known to be the most precise method about the invasive study of the mesial temporal lobe epilepsy. The depth electrode with the occipito-temporal route has been applied with manual calculation of MR images. Inherently there are some factor causing significant errors due to geometrical axis alignment, such as miss alignment of horizontal or vertical cutting line. In order to correct it in manually, it takes a long time. In this study, authors has developed the software for automate calculation of MRI wording for instance calculation and for the no time delaying operation. Authors could show that this software is useful for the clinic after applying if for 33 cases of the patients.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.150-161
• /
• 1996

A numerical procedure is described for predicting steady drift forces on very large offshore structures supported by a large number of the floating bodies of arbitrary shape dimensional source distributing method, the wave interaction theory, the far-field method of using momentum theory and the finite element method for structurally treating the space frame elements. Numerical results are compared with the experimental or numerical ones, which are obtained in the literature, of steady drift forces on a offshore structure supported by the 33(3 by 11) floating composite vertical cylinders in waves. The results of comparison confirmed the validity of the proposed approach.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.39-48
• /
• 2013

Recently, the using of prefabricated temporary equipments is increasing in the industrial field because it can reduce the installation and dismantling period. The various types of prefabricated temporary equipments are manufacturing with various materials in domestic and overseas countries. However, those equipments should win the safety certificate according to the "Governmental Notification about Safety Certification" which regulate the member-based safety certification. It tends to cause over performance of temporary equipments because it couldn't consider structural benefit of the prefabricated products. As the result of this study, it is concluded that the establishment of new safety certification standard for the prefabricated temporary equipments is resonable and the movable scaffold is appropriate for those prefabricated temporary equipment. The movable scaffolds are using as single structure and cannot be expands horizontally. Other types of temporary equipments are using as complex structure which can freely expand horizontally according to the main structure. From the results of the study, the standard of vertical compression performance of prefabricated movable scaffolds should be more than double the performance of single main frame. Other test items of safety certification standard should be fixed when the Notification is amended. The prefabricated temporary equipments which are adopted for the safety standard on assembled structure should be used, moved and kept in assembled state and not separated discretionally. The establishment of new standard for the assembled structure based on this study leads to the development of various types of temporary equipments using structural efficiency of prefabricated structure.

• 한국기계연구소 소보
• /
• s.16
• /
• pp.127-136
• /
• 1986

Recently deck crane of multi purpose cargo vessel (MPCV) is designed to posi¬tion in side instead of in the center line of the upper deck with a view to reduce the transportation cost and shipbuilding cost by shortening the length of ship. In this paper, the crane post was at first designed according to the crane maker’s specification and parent ship and the structure is analysed with Finite Ele¬ment Method. Through the careful reviews on the result of analysis, the final design of crane post was modified. The crane post is designed as a cylindrical in upper part and hexagonal in lower part instead of cylindrical on the whole as before. The connecting part of crane post is designed with the form of mixture of the cylinderical and hexagonal. Since the center of cylindrical and hexagonal section are not on the same line, it is expected to have the stress concentration. So, in order to attenuate the concentrated stress on the connecting part, the upper and lower parts was stiffened by inserting plate to enlarge the area of welding. The structure of deck part includes the tank side floor which is depend on the lower structure of the crane post that would support the force of the crane post by placing with 1.5 frame interval of the vertical plate.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.161-168
• /
• 2018

This paper presents the design procedure of the suction bucket used to support a subsea manifold. The soil-suction bucket interaction numerical analysis technique was verified by comparing the present results with a reference data. In order to simulate the soil-bucket interaction analyses of a subsea manifold structure, various material data such as undrained shear strength, elastic modulus, and poisson ratio of soft clay in Gulf of Mexico were collected from reference survey. We proposed vertical and horizontal design loads based on system weights and current-induced drag forces. Under the assumption that diameter of the suction bucket was 3.0 m considering real dimension of the subsea manifold frame structures, aspect ratio was decided to be 3.0 based on reference survey. The ultimate bearing load components were determined using tangent intersection method. It was proved that the two design load components were less than ultimate bearing loads.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3115-3123
• /
• 1993

This paper presents a real-time correction method of the movemont errors of a translatory precision machine axis. This method is a null-balances technique in which two plane mirrors are used to generate an interferometric fringe pattern utilizing the optical principles of TwymanGreen interferometry. One mirror is fixed on a reference frame, while the other is placed on the machine axis being supported by three piezoelectric actuators. From the fringe pattern, one translatory and two rotational error components of the machine axis are simultaneously detected by using CCD camera vision and image processing techniques. These errors are then independently suppressed by activating the peizoelectric actuators by real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with movement errors less than 10 nm in vertical straightness, 0.1 arcsec in pitch, and 0.06 arcsec in roll for 50mm travel by adopting the real-time correction method.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.76-79
• /
• 2002

Ghost cancelers need to accurately estimate the distortions suffered by transmitted signals on their way to receivers by capturing ghost canceling reference signals in the vertical blanking interval. As ghosts become much severer, sync separation tends to malfunction, making it impossible to acquire measurement data for channel estimation. This paper presents a robust method of acquiring ghost data using their correlation properties, and evaluates its performance through computer simulation. The reference signals are inserted in such a manner that the polarity alternates from one frame to another to remove color bursts and sync signals, and to increase the signal-to-noise ratio as well. As a result, however, they are prone to timing jitters. So a simple yet effective method is proposed that can correct for even fractional time delays. The timing errors are found to be less than about 4% of the sample spacing.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.429-432
• /
• 2000

The new MPEG-4 video coding standard enables content-based functionalities. In order to support the philosophy of the MPEG-4 visual standard, each frame of video sequences should be represented in terms of video object planes (VOP’s). In other words, video objects to be encoded in still pictures or video sequences should be prepared before the encoding process starts. Therefore, it requires a prior decomposition of sequences into VOP’s so that each VOP represents a moving object. A parallel processing system is required an automatic segmentation to be processed in real-time, because an automatic segmentation is time consuming. This paper addresses the parallel processing: system for an automatic segmentation for separating moving object from the background in image sequences. The proposed parallel processing system comprises of processing elements (PE’s) and a multi-access memory system (MAMS). Multi-access memory system is a memory controller to perform parallel memory access with the variety of types: horizontal, vertical, and block access way. In order to realize these ways, a multi-access memory system consists of a memory module selection module, data routing modules, and an address calculation and routing module. The proposed system is simulated and evaluated by the CADENCE Verilog-XL hardware simulation package.