• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.240-257
• /
• 2022

Autonomous vehicles use various local sensors such as camera, radar, and lidar to perceive the surrounding environment. However, it is difficult to predict the movement of vulnerable road users using only local sensors that are subject to limits in cognitive range. This is true especially when these users are blocked from view by obstacles. Hence, this paper developed an algorithm for collision avoidance with VRU using V2X information. The main purpose of this collision avoidance system is to overcome the limitations of the local sensors. The algorithm first evaluates the risk of collision, based on the current driving condition and the V2X information of the VRU. Subsequently, the algorithm takes one of four evasive actions; steering, braking, steering after braking, and braking after steering. A simulation was performed under various conditions. The results of the simulation confirmed that the algorithm could significantly improve the performance of the collision avoidance system while securing vehicle stability during evasive maneuvers.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.119-133
• /
• 2022

The COVID-19 pandemic is rapidly changing the behavior of members of society. Typically, the strong contagious power of the virus minimizes interaction between people in the real world, and they keep interaction activities to a minimum through online activities. Recently, as people demand online activities that enhance a sense of reality, the metaverse, which strengthens the 3D technology-centered sense of presence capability, is being chosen by people. The purpose of this study is to suggest a strategic direction for the establishment of the metaverse business model of startups by presenting factors for users' use and gratification of the metaverse. In detail, this study proposes the motivation for using the metaverse by reflecting the uses and gratification theory, and suggests a method to strengthen the motivation for the metaverse by reflecting the presences provided by the metaverse plotform and individual characteristics (normtive interpersonal influence). We surveyed people over 20 years of age who experienced metaverse and obtained 314 samples. In addition, we conducted the main effect analysis using the structural equation model and the moderating effect analysis using Process 3.1. As a result of hypothesis testing, we confirmed that metaverse presence (telepresence, social presence) has a positive effect on intention to continuous use by increasing metaverse's use and satisfaction factors (information, enjoyment, social interactivity). In addition, we found that individuals' normative interpersonal influence moderated the positive relationship between uses and gratification factors(enjoyment and social interactivity) intention to continuous use. Our study suggests strategies for establishing a user-centered business model for companies related to the metaverse.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.469-473
• /
• 2024

In this paper proposes a study on the development of a multi-camera inline inspection system using machine vision for quality inspection of pharmaceutical containers. The proposed technique captures the pharmaceutical containers from multiple angles using several cameras, allowing for more accurate quality assessment. Based on the captured data, the system inspects the dimensions and defects of the containers and, upon detecting defects, notifies the user and automatically removes the defective containers, thereby enhancing inspection efficiency. The development of the multi-camera inline inspection system using machine vision is divided into four stages. First, the design and production of a control unit that fixes or rotates the containers via suction. Second, the design and production of the main system body that moves, captures, and ejects defective products. Third, the design and development of control logic for the embedded board that controls the entire system. Finally, the design and development of a user interface (GUI) that detects defects in the pharmaceutical containers using image processing of the captured images. The system's performance was evaluated through experiments conducted by a certified testing agency. The results showed that the dimensional measurement error range of the pharmaceutical containers was between -0.30 to 0.28 mm (outer diameter) and -0.11 to 0.57 mm (overall length), which is superior to the global standard of 1 mm. The system's operational stability was measured at 100%, demonstrating its reliability. Therefore, the efficacy of the proposed multi-camera inline inspection system using machine vision for the quality inspection of pharmaceutical containers has been validated.

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.25-49
• /
• 2009

Advances in technology have resulted in the emergence of new information systems. The convergence of IT and manufacturing sectors has blurred the boundaries among industries. Also, such convergence has become established as a paradigm to build a new area. Especially the convergence of broadcasting and telecommunication, notably in the case of IPTV (Internet Protocol Television), is among the most salient examples of its kind in recent years as a major case of disruptive technology innovation. Despite its much fanfare, such convergence, however, has not fulfilled the expectation; it has not produced positive economic effects while negatively affecting the growth of IPIV. Stakeholders in and around IPIV including telecommunication companies, broadcasting corporations, and government bodies wish to gain control of IPTV under their wings. IPTV has drifted in the midst of conflicts among the stakeholders in and around IPTV, particularly telecommunication and broadcasting organizations in a broad sense. Our empirical research intends to deal with how audiences accept IPTV and how firms provide IPTV services to utilize their resources. Three research questions in this paper include, first, whether Technology Acceptance Model (TAM) can sufficiently explain the acceptance of IPTV as an information system. The second question concerns with empirically testing the playful aspect of IPTV to increase its audience acceptance. Last, but not least, this paper deals with how firms can efficiently and effectively allocate their limited resources to increase IPTV viewers. To answer those three main questions of our study, we collect data from 197 current subscribers of high speed internet service and/or cable/satellite television. Empirical results show that 'perceived usefulness (PU) $\rightarrow$ Intention to use' and 'perceived ease of use (PEU) $\rightarrow$ Intention to use' are significant. Also, 'perceived ease of use' is significantly related to 'perceived usefulness.' Perceived ease of handling IPTV without much effort can positively influence the perceived value of IPTV. In this regard, engineers and designers of IPTV should pay more attention to the user-friendly interface of IPTV. In addition, 'perceived playfulness (PP)' of IPTV is positively related to 'intention to use'. Flow, fun and entertainment have recently gained greater attention in the research concerned with information systems. Such attention is due to the changing features of information systems in recent years that combine the functional and leisure attributes. These results give practical implications to the design of IPTV that reflects not just leisure but also functional elements. This paper also investigates the relationship between 'perceived ease of use (PEU)' and 'perceived playfulness (PP).' PEU is positively related to pp. Audiences without fear can be attracted more easily to the user-friendly IPTV, thereby perceiving the fun and entertainment with ease. Practical implications from this finding are that, to attract more interest and involvement from the audience, IPTV needs to be designed with similar or even more user friendly interface. Of the factors related to 'intention to use', 'perceived usefulness (PU)' and 'perceived ease of use (PEU)' have greater impacts than 'perceived playfulness (PP).' Between PU and PEU, their impacts on 'intention to use' are not significantly different statistically. Managerial implications of this finding are that firms in preparation for the launch of IPTV service should prioritize the functions and interface of IPTV. This empirical paper also provides further insight into the ways in which firms can strategically allocate their limited resources so as to appeal to viewers, both current and potential, of IPTV.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.929-935
• /
• 2003

An analog/digital mixed mode ASIC for network synchronization of ATM switching system has been designed and fabricated. This ASIC generates a 234.7/46.94 ㎒ system clock and 77.76/19.44 ㎒ user clock using 46.94 ㎒ transmitted clocks from other systems. It also includes digital circuits for checking and selecting of the transmitted clocks. For effective ASIC design, full custom technique is used in 2 analog PLL circuits design, and standard cell based technique is used in digital circuit design. Resistors and capacitors for analog circuits are specially designed which can be fabricated in general CMOS technology, so the chip can be implemented in 0.8$\mu\textrm{m}$ digital CMOS technology with no expensive. Testing results show stable 234.7 ㎒ and 19.44 ㎒ clocks generation with each 4㎰ and 17㎰ of low ms jitter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.78-85
• /
• 2014

The Mu-communication board supported by hybrid communication is designed with Cortex M3, which is a low power energy consumption 32-bit microcontroller. The Cortex M3 microcontroller has UART(Universal asynchronous receiver/transmitter) ports which can set appropriately using the command line interpreter (CLI) program with each port. URAT ports are used for hybrid communication modems, GPS modules, etc. When the socket type was compared with the short message service type, the socket type was proven to be better. By improving the receiving performance in the control and management system of the AtoN, data loss was minimized. During the testing of the socket and SMS, data was collected from each buoy for 12 hours every 1 minute and the receiving rate of the data was found to be more than 98.58 % and 99.42 % respectively.

• Research in Plant Disease
• /
• v.20 no.1
• /
• pp.15-20
• /
• 2014

A rapid, user-friendly and simple immune-chromatographic dipstick kit named 'rapid immune-gold strip' (RIGS) kit was developed in a novel single strip format to detect on-site detection of Tomato spotted wilt virus (TSWV). Immunoglobulin G (IgG) from polyclonal antisera raised in rabbits against TSWV was purified through protein-A affinity chromatography and then the purified TSWV-IgG was conjugated to colloidal gold nano-particles which served as a test line on nitrocellulose membrane. Protein A that non-specifically binds to TSWV antibody was used as a control line on the same strip. The diagnosis process with the TSWV-RIGS involves simply grinding the suspect plant sample in a bag that contains the extraction buffer and inserting the strip the bag. Results can be seen in 2-5 minutes. The flow of the complexes of gold particles coated with TSWV-IgG and a crude sap from TSWV-infected pepper, tobacco and tomato plants resulted in intensive color formed on the test lines proportional to the concentrations of TSWV. The RIGS-TSWV kit did not show any cross-reactions against other tomato-infecting viruses unrelated to TSWV. These results indicate that the TSWV-RIGS kit is highly sensitive and is not required for laboratory training and experience prior to testing. The TSWV-RIGS kit is suitable for on-site detection of suspect TSWV-infected plants as well as for laboratory diagnosis.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.15-31
• /
• 2016

Sales Force Automation (SFA) is a strategic information system and one of the components of operational CRM system. SFA supports salespeople's activities such as selection of potential customers, creative value proposition, after-sales services, etc. SFA is increasingly used in many companies because it has the advantages to raise the salespeople's productivity by developing forecasting ability, value proposition ability, after sales service ability etc. Many researches have shown that implementation of SFA leads to the increase of salepeople performance, organizational performance, and quality of customer relationship. However, Some prior studies have discussed on the SFA implementation failure and pointed out that one of important causes of this failure is salespeople's resistance to SFA. Although many researches explain SFA acceptance phenomenon using Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB), these researches didn't deeply investigate the salespeople's resistance to SFA. Therefore, this study focuses on the factors influencing salespeople's resistance to SFA and the relationships among these factors. This study identified three factors (salespeople's perceived loss of power, perceived loss of autonomy, and perceived time and effort waste) influencing salespeople's resistance to SFA. The hypotheses testing results showed that salespeople's perceived loss of power and perceived time and effort waste significantly increased salespeople's resistance to SFA. And salespeople's perceived loss of power plays a mediating role between perceived loss of autonomy/perceived time and effort waste and salespeople's resistance to SFA. At the end of the paper, theoretical and managerial implications of this study and the limitations and future research directions are discussed.

• International Journal of Knowledge Content Development & Technology
• /
• v.8 no.1
• /
• pp.25-36
• /
• 2018

Research data must be testable. Science is all about verification and testing. To make data testable, tools used to produce, collect, and examine data during the research must be available. Quite often, however, these data become inaccessible once the work is over and the results being published. Hence, information and the related context must be provided on how research data are preserved and how they can be reproduced. Open Science is the international movement for making scientific research data properly accessible for research community. One of its major goals is building data repositories to foster wide dissemination of open data. The objectives of this research are to examine the features of research data, common repository platforms, and community requests for the purpose of designing functional requirements for research data repositories. To analyze the features of the research data, we use data curation profiles available from the Data Curation Center of the Purdue University, USA. For common repository platforms we examine Fedora Commons, iRODS, DataONE, Dataverse, Open Science Data Cloud (OSDC), and Figshare. We also analyze the requests from research community. To design a technical solution that would meet public needs for data accessibility and sharing, we take the requirements of RDA Repository Interest Group and the requests for the DataNest Community Platform developed by the Korea Institute of Science and Technology Information (KISTI). As a result, we particularize 75 requirement items grouped into 13 categories (metadata; identifiers; authentication and permission management; data access, policy support; publication; submission/ingest/management, data configuration, location; integration, preservation and sustainability, user interface; data and product quality). We hope that functional requirements set down in this study will be of help to organizations that consider deploying or designing data repositories.

• Journal of Information Technology Services
• /
• v.17 no.3
• /
• pp.117-138
• /
• 2018

The purpose of this study is to empirically analyze the relationships between the Boundary Spanning Activities (BSA) of project team and system performance in ERP system development projects. We could theoretically classify the BSA in the ERP development projects into five categories on the basis of existing studies on the BSA in the research fields of organization theory, new product development, and information systems development. These five categories are 'Ambassador' activities, 'Task-coordinator' activities, 'Scout' activities, 'Sentry' activities and 'Guard' activities. And the relationship between the implementation level of activities included in each category and the project performance (system usage and users' satisfaction) was hypothesized with respect to five BSA categories. In order to test the hypotheses, we conducted on/offline survey of the participants who were involved in the ERP system development projects, and received 345 valid responses. The unit of analysis was the project team, and the total number of teams that survey participants belonged to were 103 ones. The Structural Equation Model Analysis using the SMART PLS 3.0 was applied to statistically testing the hypotheses. The results showed that 10 hypotheses among 12 hypotheses could be supported. The theoretical implications of this study can be summarized as following; first, redefining and categorizing the BSA (Boundary Spanning Activities) in the ERP system development projects, secondly, deriving measurement indicators of the implementation level for each BSA category and statistically proving the validity and the reliability of them, and finally, suggesting the theoretical background of expanding the management area of ERP systems development projects. Furthermore, the practical implication of this study is that concrete BSA items which are empirically derived can be utilized as effective guidelines for successfully implementing the BSA in the process of managing the ERP system development projects.