• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.553-563
• /
• 2000

Horseshoe Expander is one of Slow Maxillary Expansion(SME) which aims to accommodate the contra- lateral expansion and midpalatal suture expansion or the palate. The appliance consists of skeleton type strew embedded in split Horseshoe appliance. It is the objectives of the presentation to manifest the changes in dental & craniofacial components subsequent to the application of Horseshoe Expander. The subjects for this study consisted of 32 patients (mean age : 12.7). frontal, lateral cephalometric headfilm were taken and study casts were fabricated before and after expansion. 24 items were measured, compared preexpansion with postexpansion. Especially, palatal volume was measured by means of 'Hydro-measurement method'. Tooth axis measurement on the dental casts were made with Universal bevel protractor, and Horseshoe Expander group were compared with RME group. This study of changes to maxillary expansion with Horseshoe Expander revealed the following significant results. 1. Triangular-shaped expansion pattern appeared in frontal cephalometric headfilm. 2. Palatal plane, occlusal plane, mandibular plane and upper incisor to FH increased in lateral cephalometrir headfilm. 3. Palatal volume increased significantly. A slight bite opening, reduction of occlusal contact points showed in dental casts. 4. A 2.2:1 ratio of the amount of intermolar width in maxilla(orthodontic movement) to maxillary width (orthopedic movement) was determined. 5. Horseshoe Expander group has less buccal tipping tendency than RME group, by taking high correlation coefficients in the upper second premolar and first molar. It was suggested that Horseshoe Expander showed less orthodontic changes, less buccal tipping tendency. In addition, it was effective in maxillary expansion.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.187-197
• /
• 2001

The change of the vertical dimension is of fundamental importance to the orthodontist. However, the choice between the two methods of treatment, extraction versus nonextraction, is not clear. It is not verified that the extraction method decreases vertical dimension, or nonextraction methods result in an increase in vertical dimension. The purpose of this study was to evaluate the changes of vertical dimension of face after the orthodontic treatment with standard edgewise technique, and to compare them in relation to facial types and bicuspid extraction. The subjects consisted of 165 orthodontic patients (77 of adolescents, 88 of adults), and was divided into vertical nonextraction (VN) group, vertical extraction (VE) group, horizontal nonextraction (HN) group, horizontal extraction (HE) group. Pre-and Post-treatment cephalograms were taken with standard method, traced, and digitized for each subject. The comparison of the measurements were statistically executed with Student's t-test. The results were as follows : 1. The facial height and molar height were increased after orthodontic treatment in the all groups. 2. No significant difference was found in the facial height change between the vertical and horizontal groups. 3. No significant difference was found in the facial height change between the extraction and nonextraction groups. 4. As the upper molars were extruded in adolescents group and lower molars were extruded in adults group, lower anterior facial height (LAFH) was increased. 5. None of the pretreatment variables correlates to the change of lower anterior facial height (LAFH).

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.83-94
• /
• 2012

Slopes are commonly formed both above and below roads located in mountainous terrain and along riversides. The Buk-sil site, a cut slope formed below the road, collapsed in October, 2010. A field investigation determined the causes of failure as improper drainage of valley water from the slope above the road and direct seepage of road-surface water. These factors may have accelerated the collapse via complex interaction between water and sub-surface structures such as bedding. Projection analysis of the site showed the possible involvement of plane, wedge, and toppling failure. Safety factors calculated by Limit Equilibrium Analysis for plane and wedge failure were below the standard for wet conditions. The wetness index, analyzed using topographic factors of the study area, was 9.0-10.5, which is high compared with the values calculated for nearby areas. This finding indicates a high concentration of water flow. We consider that water-flow control on the upper road is crucial for enhancing slope stability at the Buk-sil site.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.132-139
• /
• 2010

To manage the effluent nutrients amounts from rice paddy fields using free range ducks or rice bran, we evaluated the effects of a purifying paddy field which is no fertilizer, no pesticides, and dense rice seedling having a concept of constructed wetland. The experimental paddy field was located at downstream in the watershed of ducks using rice culture area in Milyang. The purifying paddy of land design were treated with seeding method, and vegetation type. As land design, direct seeding on plane, and direct seeding on high-ridge field in 2007. Planting rice only, and planting rice with water hyacinth were treated as vegetation type in purifying paddy in 2008. The purifying paddy fields were effective to reduce amount of T-N and T-P contents in effluent to 33.2~45.3%, and 53.1~55.4%, respectively. The direct seeding on high-ridge treatment, having long residence time of effluent water was more effective than plane plot as T-N 0.29 $g^{-1}m^{-2}d^{-1}$, and T-P 0.031 $g^{-1}m^{-2}d^{-1}$. The planting rice with water hyacinth treatment was effective than planting rice only as T-N 0.23 $g^{-1}m^{-2}d^{-1}$, and T-P 0.049 $g^{-1}m^{-2}d^{-1}$. The optimum area of purifying paddy field to treats all effluent were found out 3.2~4.7% of rice culture area using free range ducks, and rice bran at upper stream.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.153-163
• /
• 1995

In this study, Receiver Operating Characteristic(ROC) analysis was used to evaluate the ability of cephalometric measurements to identify patients with Class III malocclusions. ROC analysis is the method for determining the validity of a diagnostic measure and for evaluating the relative value of diagnostic tests. The sample consisted of 496 patients with malocclusion. Class III malocclusion is defined as the dental relationship for which The mesiobuccal groove of the lower first molar is deviated mesially from the mesiobuccal cusp of the upper first molar. Of the total sample of 496 patients, 245 had Class III malocclusions. 16 cephalometric measurements were selected, each of which was treated as a diagnostic test. The ROC curves were generated for each cephalometric measurement with intervals of $1.0^{\circ}$ for angular measurements, 1.0mm for linear measurements. The area under the ROC curves was measured for direct comparison among different diagnostic tests. The results were as follows; 1. The 'Wits' appraisal was found to be a better diagnostic criterion for the presence of Class III malocclusion than any other commonly'used cephalometric measurement. 2. AB plane angle, ANB angle, App-Bpp distance, AF-BF distance, APDI, Distance of point A and Pog to N perpendicular, maxillomandibular differential had high diagnostic value. 3. Cephalometric measurements which evaluate the position of the mandible had moderate diagnostic value. 4. Cephalometric measurements related to the maxilla discriminated least between patients with and without Class III malocclusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.431-443
• /
• 2007

Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.300-310
• /
• 2005

In this paper we propose the compact three-layer EBG structure. The unit cell of the proposed EBG structure is composed of a square patch in the upper layer and a square ring stripline in the lower layer that are connected to the ground plane through conducting vias. Reflection phase analysis method and tangential transmission method were considered to accomplish effective EM simulation and measurement. EM simulation results indicate that bandgap characteristics of the EBG structure using both methods is nearly identical. Parametric studies have been performed with the EM simulator to analyze the properties of the EBG structure by investigating the phase shift of the normally incident plane wave, and the transmission measurements between simple monopole antennas positioned near the EBGstructure have been done. The operating fiefuency bandgap of the proposed EBG structure is about 34 $\%$ lower than the conventional EBG structure with the same size. Measured results show bandgap from 0.930 GHz to 0.945 GHz.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.231-238
• /
• 2001

This study was performed to evaluate soft tissue cephalometric norms for Korean adults which can be implemented in surgical orthodontic treatment planning using selected horizontal reference plane especially for Koreans (Male: $SN-7.5^{\circ}$, Female: $SN-9.0^{\circ}$) and a simplified analytical method. 70 males and 70 females consisting of freshmen of Yonsei University from 1996 to 1997 and students from the Dental College of Yonsei University were chosen according to clinical examination and cephalometric analysis. The samples had normal profiles, normal anteroposterior skeletal relationship(ANB angle of $0^{\circ}\;to\;4^{\circ}$ and Wits appraisal of -4.0mm to 0mm), and Class I molar and canine relationship. They had no missing or supernumerary teeth and had no experience of orthodontic or prosthetic treatment. After the selection of 15 soft tissue landmarks and the construction of horizontal and vertical reference lines, 25 measurements were taken. These consisted of vertical and horizontal linear measurements and angular measurements. The results were as follows. 1. Mean and standard deviation of the measurements were calculated in males and females. 2. Vertical measurements were comparably bigger in males than females whereas anterior facial height ratio(sN-Sn/Sn-sMe) and lower anterior facial height ratio(Sn-Stms/Stmi-sMe) showed no significant difference between sexes. 3. Most of the horizontal measurements in relation to the vertical reference line(G-perpendicular) showed no significant difference between sexes. 4. Nasofacial angle, columellar angle, nasolabial angle and facial contour angle showed no significant difference between sexes. 5. The upper and lower lip were positioned about $-1.0{\pm}2.0mm$ and $+1.0{\pm}2.0mm$ in relation to the Ricketts' esthetic line in both sexes. In this study, soft tissue cephalometric norms of Korean adults for orthognathic surgery were obtained.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.221-230
• /
• 2001

This study was performed to evaluate hard tissue cephalometric norms for Korean adults which can be implemented in surgical orthodontic treatment planning using selected horizontal reference plane especially for Koreans (Male: $SN-7.5^{\circ}$, Female: $SN-9.0^{\circ}$) and a simplified analytical method. 70 males and 70 females consisting of freshmen of Yonsei University from 1996 to 1997 and students from the Dental College of Yonsei University were chosen according to clinical examination and cephalometric analysis. The samples had normal profiles, normal anteroposterior skeletal relationship(ANB angle of $0^{\circ}$ to $4^{\circ}$ and Wits appraisal of -4.0mm to 0mm), and Class I molar and canine relationship. They had no missing or supernumerary teeth and had no experience of orthodontic or prosthetic treatment. After the selection of 23 landmarks and the construction of horizontal and vertical reference lines, 22 skeletal and 12 dental measurements were taken. These consisted of vertical and horizontal linear measurements and angular measurements. The results were as follows. 1. Mean and standard deviation of the measurements were calculated for males and females. 2. Most of the skeletal vertical measurements, and maxillary and mandibular length were bigger in males than females. Whereas anterior facial height ratio(N-ANS/ANS-Me) as well as maxillary and mandibular antero-posterior position in relation to the vertical reference line(N-perpendicular) showed no signigicant difference between sexes. 3. Maxillary and mandibular dental antero-posterior position in relation to the vertical reference line(N-perpendicular) showed no significant difference between sexes. 4. The upper incisor show(U1-Stms) was $2.1{\pm}1.7mm$ in males and $3.3{\pm}1.7mm$ in females. In this study, hard tissue cephalometric norms of Korean adults for orthognathic surgery were obtained.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.