• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.318-322
• /
• 2005

We applied a commercially available computational fluid dynamics model, FLOW-3D, to design a settling basin inlet structure for the intended O sewage plant. In addition, we analyzed the extent to which the inlet sewage water was distributed as a result, firstly, of the location and width of a submerged baffle wall and, secondly, of the opening ratio of a baffle wall with opening holes. The application results show that the flow is unstable due to the generation of eddies in both sides of the submerged baffle wall when the submerged baffle wall is located close to the inlet. The eddies and subsequent instability also occur when the submerged baffle wall is located close to the baffle wall with opening holes. Moreover, the discharge that passes through the midsection of the settling basin increases as the width of the submerged baffle wall increases. At the O sewage plant, when the submerged baffle wall with a width of 2.4 m was located 2 m from the inlet structure and the opening ratio of the baffle wall was 7 percent, the most satisfactory distribution of the inlet sewage water occurred at the entrance of the settling basin.

• Journal of Surface Science and Engineering
• /
• v.49 no.4
• /
• pp.389-394
• /
• 2016

The operation method of nuclear power plants is currently changing to high burn-up and long period that can enhance economics and efficiency of the plant. Since nuclear plant operation environment has been becoming severe, the amount of absorbed hydrogen also has increased. Absorbed hydrogen can be fatal securing safety of nuclear fuel cladding in case of Loss of Coolant Accidents(LOCA). In order to examine the impact of hydride on high-temperature oxidation, high-temperature oxidation experiment was performed on normal Zry-4 cladding and on Zry-4 cladding where hydrogen is charged in air pressure steam atmosphere under the $950^{\circ}C$ and $1000^{\circ}C$. According to the results, while oxidation acceleration due to charged hydrogen was not observed prior to breakaway oxidation creation, oxidation began to accelerate in cladding where hydrogens charged as soon as the breakaway oxidation started. If so much hydrogen are charged in the cladding, equiaxial monoclinic phase to unstable of stress is formed and it is presumed that oxidation is accelerated because nearby stress caused a crack in equiaxial phase, and that makes corrosion resistance decline sharply.

• Korean Journal of Plant Resources
• /
• v.21 no.6
• /
• pp.435-439
• /
• 2008

Due to the fact that tocopherols and tocotrienols have antioxidant and anticancer properties, the commercial utilization of unsaponifiable fractions in rice bran is increasing. These nutraceutical compounds, however, are fairly unstable and readily break down when exposed to oxygen or lighting conditions. To compare the relative sensitivity of vit E isomers to heat and oxygen, concentrated unsaponifiable fractions extracted from crude rice bran oil were exposed to various temperature, oxygen (nitrogen-balanced), and bathing solvent conditions and resultant concentration changes in ${\alpha}$- and ${\gamma}$-tocopherols (T) and tocotrienols (T3) were evaluated. Each isomer exhibited different heat stability. Among them, ${\alpha}$-T3 degraded more rapidly compared to other vit E isomers while ${\alpha}$-T was the most stable isomer. Oxygen level also showed significant impact on each isomer's stability where severe reductions of ${\gamma}$-T (by 20%) and ${\gamma}$-T3 (by 29%) were observed under 2% oxygen conditions, while under 0% oxygen conditions no degradation could be observed even after exposure to $95^{\circ}C$ for 4 hours. When various blending solvents were mixed with concentrated unsaponifiable fractions, organic solvents such as isooctane and hexane were more effective in maintaining the stability of ${\gamma}$- T3 compared to edible oils, among which com oil was more efficient than soybean and rice bran oils.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.9
• /
• pp.1305-1310
• /
• 2021

Shikimate is a key high-demand metabolite for synthesizing valuable antiviral drugs, such as the anti-influenza drug, oseltamivir (Tamiflu). Microbial-based strategies for shikimate production have been developed to overcome the unstable and expensive supply of shikimate derived from traditional plant extraction processes. In this study, a microbial cell factory using Corynebacterium glutamicum was designed to overproduce shikimate in a fed-batch culture system. First, the shikimate kinase gene (aroK) responsible for converting shikimate to the next step was disrupted to facilitate the accumulation of shikimate. Several genes encoding the shikimate bypass route, such as dehydroshikimate dehydratase (QsuB), pyruvate kinase (Pyk1), and quinate/shikimate dehydrogenase (QsuD), were disrupted sequentially. An artificial operon containing several shikimate pathway genes, including aroE, aroB, aroF, and aroG were overexpressed to maximize the glucose uptake and intermediate flux. The rationally designed shikimate-overproducing C. glutamicum strain grown in an optimized medium produced approximately 37.3 g/l of shikimate in 7-L fed-batch fermentation. Overall, rational cell factory design and culture process optimization for the microbial-based production of shikimate will play a key role in complementing traditional plant-derived shikimate production processes.

• Journal of the Korea Society for Simulation
• /
• v.31 no.1
• /
• pp.29-41
• /
• 2022

As one of the alternatives to solve the problem of unstable food supply and demand imbalance caused by abnormal climate change, the need for plant factories is increasing. Airflow in plant factory is recognized as one of important factor of plant which influence transpiration and heat transfer. On the other hand, Digital Twin (DT) is getting attention as a means of providing various services that are impossible only with the real system by replicating the real system in the virtual world. This study aimed to develop a digital twin model for airflow prediction that can predict airflow in various situations by applying the concept of digital twin to a plant factory in operation. To this end, first, the mathematical formalism of the digital twin model for airflow analysis in plant factories is presented, and based on this, the information necessary for airflow prediction modeling of a plant factory in operation is specified. Then, the shape of the plant factory is implemented in CAD and the DT model is developed by combining the computational fluid dynamics (CFD) components for airflow behavior analysis. Finally, the DT model for high-accuracy airflow prediction is completed through the validation of the model and the machine learning-based calibration process by comparing the simulation analysis result of the DT model with the actual airflow value collected from the plant factory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.145-152
• /
• 2004

In this paper, an S(stochastic)-eigenvalue and its corresponding S-eigenvector concept for linear continuous-time systems with probabilistic uncertainties are proposed. The proposed concept is concerned with the perturbation of eigenvalues due to the stochastic variable parameters in the dynamic model of a plant. An S-eigenstructure assignment scheme via the Sylvester equation approach based on the S-eigenvalue/-eigenvector concept is also proposed. The proposed control design scheme based on the proposed concept is applied to a longitudinal dynamics of an open-loop-unstable aircraft with possible uncertainties in aerodynamic and thrust effects as well as separate dynamic pressure effects. These results explicitly characterize how S-eigenvalues in the complex plane may impose stability on the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1571-1574
• /
• 2003

A shared compliant control scheme based on IMC is proposed for the position-force force reflecting control system. The controller of the slave manipulator is designed by IMC method for the open loop unstable plant. The compliant control is implemented by first order low pass filter. In the proposed scheme, the slave manipulator well tracks the position of the master manipulator in free space and the compliance of the slave manipulator is autonomously controlled in contact condition. The simulation results show that the excellence of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.7-12
• /
• 2003

In this paper, S(stochastic)-eigenvalue concept and its S-eigenvector for linear continuous-time systems with probabilistic uncertainties are proposed. The proposed concept is concerned with the perturbation of eigenvalues due to the probabilistic variable parameters in the dynamic model of a plant. S-eigenstructure assignment scheme via the Sylvester equation approach based on the S-eigenvalue concept is also proposed. The proposed design scheme is applied to the longitudinal dynamics of open-loop-unstable aircraft with possible uncertainties in aerodynamic and thrust effects as well as separate dynamic pressure.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.573-578
• /
• 1986

The adaptive control of a plant in the presence of disturbance is considered. In sevral papers, it was shown that bounded disturbance made the basic adaptive scheme unstable. For achieving robust stability in adaptive control system in the presence of disturbance, the pureintegration in the adaptive law is limited by means of an additional feedback term. In this paper, the suggested adaptive control law has property that the output error converges to zero whether the disturbance exist or not, without the priori knowledge. The adaptive controller suggested assure the boundness of all signal in the overall system. Finally, computer simulation show the effectiveness of the suggested adaptive control law.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.95-98
• /
• 2001

The effect of stabilizing polymer on hGM-CSF production was investigated in suspension cell cultures of transgenic tobacco. Secreted human GM -CSF from cell suspension cultures was detected in the medium at a maximum concentration of 180 ${\mu}g/L$ by ELISA. However, the secreted hGM -CSF was unstable in the medium, and rapidly degraded after day 5. In order to stabilize the secreted hGM-CSF, three stabilizing polymers were tested, polyethylene glycol, polyvinylpyrrolidone and gelatin. Gelatin was the most effective in stabilizing the secreted GM-CSF. Following the addition of 5% (w/v) gelatin, the maximum GM -CSF concentration reached 783 ${\mu}g/L$, a 4.6-fold increase over control.