• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.2
• /
• pp.66-75
• /
• 2010

This paper proposes an efficient method for design and implementation of the artificial intelligence (AI) of 'omok' game on the GPU. The proposed AI is designed on a cooperative structure using min-max game tree and genetic algorithm. Since the evaluation function needs intensive computation but is independently performed on a lot of candidates in the solution space, it is computed on the GPU in a massive parallel way. The implementation on NVIDIA CUDA and the experimental results show that it outperforms significantly over the CPU, in which parallel game tree and genetic algorithm on the GPU runs more than 400 times and 300 times faster than on the CPU. In the proposed cooperative AI, selective search using genetic algorithm is performed subsequently after the full search using game tree to search the solution space more efficiently as well as to avoid the thread overflow. Experimental results show that the proposed algorithm enhances the AI significantly and makes it run within the time limit given by the game's rule.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.7
• /
• pp.31-40
• /
• 2012

In most design codes, soils are classified as either sandy or clayey soils, and appropriate design equations for each soil type are used to estimate their soil behaviour. However, sand-fine mixtures, which are typically referred to as intermediate soils, are somewhere at the middle of sandy or clayey soils, and therefore a unified interpretation of soil behaviour is necessary. In this paper, a series of cyclic shear tests were carried out for three different combinations of sand-fine mixtures with various fines content. Silica-sand mixture and fines (Iwakuni natural clay, Tottori silt, kaolinite) were mixed together with various mass ratios, while paying attention to the changes of void ratios expressed in terms of sand structure. The cyclic shear strengths of the mixtures below the threshold fines content were examined with the increasing fines contents. As a result, as the fines contents increased, their cyclic deviator stress ratios decreased for dense samples while it increased for loose samples. Additionally, cyclic deviator stress ratio of the mixtures was estimated using the concept of equivalent granular void ratio.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.3
• /
• pp.329-335
• /
• 2011

The finite element method (FEM) has been used for various fields like mathematics and engineering. However, the FEM has a difficulty in describing the geometric shape exactly due to its property of piecewise linear discretization. Recently, however, a so-called isogeometric analysis method that uses the non-uniform rational B-spline(NURBS) basis function has been developed. The NURBS can be used to describe the geometry exactly and play a role of basis functions for the response analysis. Nevertheless, constructing the NURBS basis functions in analysis is as costly as a meshing process in the FEM. Since the isogeometric method shares geometric data with CAD, it is possible to intactly import the model data from commercial CAD tools. In this paper, we use the Rhinoceros 3D software to create CAD models and export in the form of STEP file. The information of knot vectors and control points in the NURBS is utilized in the isogeometric analysis. Through some numerical examples, the accuracy of isogeometric method is compared with that of FEM. Also, the efficiency of the isogeometric method that includes the CAD and CAE in a unified framework is verified.

• Archives of design research
• /
• v.16 no.3
• /
• pp.231-240
• /
• 2003

As all other cultures do, in the background of color of costume, view of life or spirit are contained in the nature or environment that the people lived in are applied. Marring is the ceremony to be socially recognized that both of sexes are unified, assist ancestor and bear future generation. Meaning and symbolism of color are appeared in beauty and organic composition of Lee dynasty. This paper tried to dear up five colors are dean, beautiful and philosophical colors rather than awkward composition of colors through surveying character of five colors appeared in Korean traditional wedding dress that has been succeeded in present age. This paper compared Korean traditional wedding dress and "Dan-chung" of Korea, Japan and China and surveyed theoretical background of Korean traditional color to find character of color appeared in Korean traditional wedding dress. As a result, Korean traditional color is meaningful symbolic color, its origin starts in yin-yang and the live elements of the Oriental cosmogony and it is related with Taoism of Confucianism and color of "Dan-chung." Five colors of yin-yang means everything under the sun and il is the color achieving beauty of balance due to correlation when it is linked to over one color. Further, it contains nature worship and human dignity, prays happiness and gives the significance of "Buksa", meaning of expelling an evil spirit. Formative beauty praying that all creatures are harmonized while human is happy and escapes from uncertainty is the beauty pursuing mental satisfaction as well as visual satisfaction. In future, the creational and characteristic designs that can appeal to world are required through right understanding and study of the beauty of traditional culture beauty of traditional culture

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.233-242
• /
• 2006

The purpose of this study is to investigate communication efficacy of advertisement text through audience responses. This study approached qualitatively to KT&G TV commercials. The research proceeded as follows: First, as background theory, studies on audience focusing advertisement criticism and the interpretation of advertising texts were reviewed. Secondly, the characteristics of the audiences of the advertisements, analyzed through in-depth individual interviews as well as group interviews, were incorporated into a broad theme and then divided into different dimensions. Finally, the audiences' decoding code and critic reponses in reading ambiguous advertising texts, and the interrelationship between strategic ambiguity were discussed under a unified model. The major findings of this study are as follows: In interpreting the ambiguous advertising texts, the audiences use various decoding codes such as language, visuals, technology and rhetoric, and various critic responses such as linguistic, macroscopic, schematic, non-verbal and socio-cultural factors, in quite comprehensive manner. Also, it was shown that audiences make use of different decoding strategies in terms of their recognition, reliability, emotional attitude, and behavior. It can therefore be concluded that the strategic ambiguity has its limit in explaining its effectiveness in the entire dimensions of recognition, emotional attitude, and behavior, in the sense that the strategic ambiguity is most effective in recognition while it invokes more negativity in the behavioral dimension. Finally, this empirical study, focusing on qualitative analyses, may have its limit as well; however, deeper statistic-qualitative studies in the future could compensate for it.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1049-1064
• /
• 2005

The demands of increasingly complicated software have led to the proliferation of object-oriented design methodologies in embedded systems. To execute a system designed with objects in target hardware, a task set should be derived from the objects, representing how many tasks reside in the system and which task processes which event arriving at an object. The derived task set greatly influences the responsiveness of the system. Nevertheless, it is very difficult to derive an optimal task set due to the discrepancy between objects and tasks. Therefore, the common method currently used by developers is to repetitively try various task sets. This paper proposes Scenario-based Implementation Synthesis Architecture (SISA) to solve this problem. SISA encompasses a method for deriving a task set from a system designed with objects as well as its supporting development tools and run-time system architecture. A system designed with SISA not only consists of the smallest possible number of tasks, but also guarantees that the response time for each event in the system is minimized. We have fully implemented SISA by extending the ResoRT development tool and applied it to an existing industrial PBX system. The experimental results show that maximum response times were reduced $30.3\%$ on average compared to when the task set was derived by the best known existing methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.21-35
• /
• 2002

Nowadays, in accordance with increasing expectations of multimedia stream service on the internet, a lot of distributed applications are being required and developed. But the models of the existing systems have the problems that cannot support the extensibility and the reusability, when the QoS relating functions are being developed as an integrated modules which are suited on the centralized controlled specific-purpose application services. To cope with these problems, it is suggested in this paper to a distributed QoS management system on CORBA, an object-oriented middleware compliance. This systems we suggested can provides not only for efficient control of resources, various service QoS, and QoS control functions as the existing functions, but also QoS control real-time negotiation and dynamic adaptation in addition. This system consists of QoS Control Management Module(QoS CMM) in client side and QoS Management Module(QoS MM) in server side, respectively. These distributed modules are interfacing with each other via CORBA on different systems for distributed QoS management while serving distributed streaming applications. In phase of design of our system, we use UML(Unified Modeling Language) for designing each component in modules, their method calls and various detailed functions for controlling QoS of stream services. For implementation of our system, we used OrbixWeb 3.1c following CORBA specification on Solaris 2.5/2.7, Java language, Java Media Framework API 2.0 beta2, Mini-SQL 1.0.16 and the multimedia equipments, such as SunVideoPlus/Sun Video capture board and Sun Camera. Finally, we showed a numerical data controlled by real-time negotiation and adaptation procedures based on QoS map information to GUIs on client and server dynamically, while our distributed QoS management system is executing a given streaming service.

• Fire Science and Engineering
• /
• v.21 no.4
• /
• pp.1-11
• /
• 2007

This study aims to investigate, review, and summarize the definition, development, and applications of "percent agent in pipe", "percent of agent in pipe" which is used as a key factor in testing and evaluating the performance of gaseous fire extinguishing agents, including Halon 1301 and $CO_2$. This study also analyzes and compares the local and international standards on testing and evaluating the performance of gaseous fire extinguishing systems, as well as the results of system performance tests conducted as a part of performance evaluation and approval programs for gaseous fire extinguishing systems, especially, Korean Gaseous Fire Extinguishing System Performance Approval Program called KFI Approval. Percent agent in pipe was defined first in NFPA 12A, Standard on Halon 1301 Fire Extinguishing Systems, dating back to the 1970's. After the phaseout of Halon 1301 systems in 1994 in the developed countries, the percent agent in pipe has been widely used in Halon 1301 alternative clean agent fire extinguishing systems, both halocarbon clean agent systems and inert gas clean agent systems, as an essential criterion to assure the system design accuracy, determine the limitations and performance of a system, and to predict the system performance results accurately, especially, in association with their system flow calculations. Underwriters Laboratories has their own standards such as UL 2127 and 2166 applying percent agent in pipe in testing and evaluating the performance of clean agent fire extinguishing systems. As a part of a system performance test and approval program called KFI Approval System, Korea also has started to apply the percent agent in pipe as a key factor to test, evaluate, and approve the performance of gaseous fire extinguishing systems, including both high and low pressure $CO_2$ systems, from the early 2000's. This study outlines and summarizes the relevant UL and KFI standards and also describes the actual test resultant data, including the maximum percents of agent in pipe for gaseous fire extinguishing systems. As evidenced in lots of tests conducted as a part of the system performance test and approval programs like KFI Approval System, it has been proven that the percent agent in pipe may work as a key factor in testing, evaluating, and determining the limitations and performance of gaseous fire extinguishing systems, especially compared with the hydraulic flow calculations of computer design programs of gaseous fire extinguishing systems, and will remain as such in the future. As one thing to note, however, there are some difficulties in using the unified percent agent in pipe to determine the maximum lengths of pipe networks for gaseous fire extinguishing systems, because the varying definitions used by some of the flow calculations (not in accordance with NFPA 12A definition) make it impossible to do any direct comparison of pipe lengths based on percent agent in pipe.

• Spatial Information Research
• /
• v.7 no.2
• /
• pp.175-190
• /
• 1999

Recently , as GIS technology is rapidly improved and stabilized, there are some needs to reuse pre-developed and powerful GIS technology. GIS standardization based on components and open interfaces becomes a way to solve those reusability of previous GIS technology. This GIS standardization currently focuses on building the GIS Data Infrastructure that is being deployed globally. Especially, OpenGIS consortium which is mainly made up of international GIS leading vendors is announcing some GIS abstract specifications and implementation specifications. This study focuses on how could we design and implement the OLE/COM-based data provider component based on various DBMS or file systems, how could these data provider components be used for enterprise UIS(Urban Information Systems) and how could various formatted GIS data be shared in one system. Also some problems practically caused by an implementation process of data provider component are listed up and some solutions are given. Furthermore, design and analysis of UML(Unified Modeling Language) was reformed through the data provider component development task and this UML methodology is able to indicate a standardized model for newly developed data provider component.

• Korean Journal of Clinical Pharmacy
• /
• v.24 no.4
• /
• pp.296-303
• /
• 2014

Background: The first pharmacy student practice undergoing 6 year pharmacy school curriculum have begun in the hospital pharmacy, community pharmacy, pharmaceutical company and administrative office since 2013. Although most of practice sites have prepared the program of pharmacy student practice education for several years under guideline of Korean Association of Pharmacy Education, generally community pharmacies which start the pharmacy student practice education have difficulty in performing the desirable student practice program due to absent experience for it. So we reported the comparison of student practice programs between mono pharmacy and multiple pharmacies conducted by Gyeongsang National University College of Pharmacy to provide the future design information of the ideal pharmacy student practice in community pharmacy. Method: Students who practiced both multiple (multi) and mono pharmacy (mono) programs for each 5 weeks were participated the survey to evaluate the student practice programs. Results: The results of the survey on the student practice program reported that students were much more satisfied with the multiple pharmacies program than mono pharmacy program in both practical contents ($4.12{\pm}0.72$ : $3.27{\pm}1.28$; multi : mono) and satisfaction ($4.54{\pm}0.54$ : $3.54{\pm}1.3$; multi : mono) and they all gave the highest points ($5.00{\pm}0.00$) to multiple pharmacies program for recommendation because the multiple pharmacies program was significantly helpful for their experience to plan the future career. Conclusion: Mono and multiple pharmacy practice programs would be a great helpful for student's future career. However, the disadvantages of each program should be amended gradually for the unified and specialized program to be established the ideal community pharmacy student practice in Korea. The results will be affected the pharmacy practice program for students in community pharmacy and the other colleges of pharmacy to design the ideal community pharmacy practice program.