• 제목/요약/키워드: uProcessor

검색결과 95건 처리시간 0.024초

정상인(正常人)의 저작운동시(咀嚼運動時) 교근(咬筋)과 측두근(側頭筋)의 근활성도(筋活性度)에 관(關)한 연구(硏究) (AN INTEGRATED EMG STUDY OF THE MASSETER AND ANTERIOR TEMPORAL MUSCLE IN NORMAL PERSON DURING CHEWING)

  • 백영걸;최대균;박남수;최부병
    • 대한치과보철학회지
    • /
    • 제25권1호
    • /
    • pp.213-226
    • /
    • 1987
  • The purpose of this study was to standardize and classify the coordination pattern among the left and right masseter and anterior temporal muscles, in terms of integrated EMG values per stroke during gum chewing in normal subjects. In this study, 20 normal subjects were selected to chew a piece of gum and integrated EMG from middle portion of the masseter and anterior temporal muscles on both sides were recorded 20 times during each of the right and left chewing respectively. And the Bioelectric Processor Model EM2 (Myo-tronies Research, Inc., U.S.A.) with the surface electrodes was used to record the EMG activity during all experimental procedures. The results were as follows; 1. In all subjects, the chewing side masseter muscle was predominantly active among the four muscles examined. 2. The integrated EMG value of the middle of masseter muscle was significantly predominant than those of the anterior temporal muscle (p<0.0001) on the chewing side, but no significant predominant was observed on the nonchewing side (p<0.98). 3. In comparison with same muscles on the chewing and nonchewing side, low correlation coefficient was found between the middle of masseter muscles (R=0.317), but high correlation coefficient was found between the anterior temporal muscles (R=0.738). Between two muscles on the same side, there were significant correlation in the chewing (R=0.557) and nonchewing side (R=0.625). 4. In the coordination patterns among four muscles examined, distinct individual differences were found, but in an identical subject one fixed pattern appeared with significant reproducibility.

  • PDF

병렬 프로그램에서의 효율적인 대용량 파일 입출력 방식의 비교 연구 (Research for Efficient Massive File I/O on Parallel Programs)

  • 황규현;김영태
    • 인터넷정보학회논문지
    • /
    • 제18권2호
    • /
    • pp.53-60
    • /
    • 2017
  • 분산 메모리형의 병렬 프로그램에서는 프로세서들이 독립적으로 입출력을 처리하기 때문에 여러 유형의 파일 입출력 방식이 사용된다. 본 논문에서는 분산 메모리형 병렬 프로그램에서의 대용량 파일에 대한 효율적인 입출력 방식을 알아보기 위하여 다양한 방식을 구현하고 비교 분석하였다. 구현된 방식으로는 (i) NFS를 활용한 병렬 입출력 방식, (ii) 호스트 프로세서에서의 순차 입출력과 도메인 분산 방식, 그리고 (iii) 메시지 전송 전용 입출력(MPI-IO) 방식 등이 있다. 성능 분석을 위해서 별도의 파일 서버를 사용하였으며 한 대 및 두 대의 계산 클라이언트에서 다중 프로세서를 사용하였다. 비교 분석 결과, 입력의 경우에는 NFS 병렬 입력 방식이, 출력의 경우에는 도메인 전송을 통한 순차 출력 방식이 가장 효율적으로 나타났으며, 예상과는 다르게 메시지 전송 전용 입출력 방식의 성능이 가장 낮게 나왔다.

건물에너지 성능 평가를 위한 효과적 기상자료 선정에 관한 연구 (Assessment of Insolation Data in Korea for Building Energy Performance Assessment)

  • 김기세;김창범;박준언;윤종호;이의준;송인춘
    • 태양에너지
    • /
    • 제18권3호
    • /
    • pp.31-39
    • /
    • 1998
  • 성공적인 건물에너지 진단을 위한 주요한 인자중의 하나는 올바른 기상화일의 선정에 있다고 할 수 있다. 따라서 본 연구에서는 건물의 에너지진단을 위한 프로그램의 기상화일을 제공하기 위해 국내 주요 6개도시의 약 30년간의 Raw Data DB를 구축하였으며, 이를 활용하여 사용자로 하여금 필요한 기상요소만을 선택하여 출력할 수 있도록 구성한 기상요소 선택프로그램 "KWDP version 1.0"을 개발하였다. 또한 누락된 기상요소를 생성할 수 있는 DOE2.1E용 기상데이터 생성 프로그램인 Wmake.exe 프로그램을 개발하였고, 에너지진단을 위한 시뮬레이션의 결과에 신뢰도를 높일 수 있는 기상데이터의 선정방법을 제시하였다.

  • PDF

텅스텐 실리사이드를 차세대 게이트 전극으로 이용한 MOS 소자의 특성 분석 (Characteristics of Metal-Oxide- Semiconductor (MOS) Devices with Tungsten Silicide for Alternate Gate Metal)

  • 노관종;윤선필;양성우;노용한
    • 대한전자공학회논문지SD
    • /
    • 제38권7호
    • /
    • pp.513-519
    • /
    • 2001
  • Si 과다 텅스텐 실리사이드를 초미세 MOS 소자의 대체 게이트 전극으로 제안하였다. SiO₂위에 텅스텐 실리사이드를 직접 증착하고 급속 열처리를 수행한 결과 낮은 저항을 얻고 불소(F) 확산 또한 무시할 수 있음을 확인하였다. 특히, 800 ℃, 진공 분위기에서 3분간 급속 열처리한 텅스텐 실리사이드의 경우 비저항이 ∼160 μΩ·cm이었고, 불소확산에 의한 산화막의 불균일한 성장도 발견할 수 없었다. 또한, WSix-SiO₂-Si (MOS) 캐패시터의 전기적 특성 분석 결과도 우수하였다.

  • PDF

습관적(習慣的) 저작(咀嚼)과 저작근(咀嚼筋)의 동통유발(疼痛誘發)과의 관계에 대한 근전도학적(筋電圖學的) 연구(硏究) (AN INTEGRATED EMG STUDY OF RELATIONSHIPS BETWEEN PREFERRED CHEWING AND SIDE OF INITIAL MUSCLE PAINS)

  • 이성복;최대균;최부병;박남수
    • 대한치과보철학회지
    • /
    • 제24권1호
    • /
    • pp.165-176
    • /
    • 1986
  • The purpose of this study was to investigate electromyographically the relationship between preferred chewing side and side of initial muscle pains. In this study, 20 normal healthy subjects were selected , and each subject chewed randomly chewing gum for 20 minutes to establish preferred chewing side. To induce initial muscle pains, biting force of 10Kg on the gnathodynamometer was maintained by the subjects. And the Bioelectric processor EM2(Myo-Ironies Research, Inc. U.S.A.) with the surface electrodes was used to record the EMG activity during all experimental procedures. The results were as follows; 1. A majority of the present subjects (60%) had a preferred chewing side, but with few exceptions, subjects were unable to explain why a given side was preferred; explanations were only 'comfort' and 'habit' 2. The chewing, or working side was determined largely by the mean voltage of the surface electromyogram (EMG); in comparison with EMG from the non-wlring (contralateral) side, the working (ipsilateral) side showed a higher amplitude. 3. After the effort, the right masseter muscle is the most frequent site of pains, followed by the left masseter muscle, the anterior part of the right temporalis muscle and tile anterior part of the left temporalis muscle. 4. After the effort, mean voltages of masseter muscles were slightly increased, but mean voltages of temporalis anterior were slightly decreased at physiologic rest position. 5. No relationships could be established between preferred chewing side and side of initial muscle pains.

  • PDF

유치악자와 총의치 장착자의 저작운동시 교근과 측두근의 근할성도에 관한 비교연구 (A COMPARATIVE ELECTROMYOGRAPHIC STUDY OF THE MASSETER AND ANTERIOR TEMPORAL MUSCLES DURING MASTICATORY FUNCTION OF SUBJECTS WITH NATURAL TEETH AND COMPLETE DENTURE WEARERS)

  • 최승현;최부병;최대균
    • 대한치과보철학회지
    • /
    • 제29권1호
    • /
    • pp.53-71
    • /
    • 1991
  • This study was performed to investigate the muscular activity of the complete denture wearers compare with subjects with natural teeth. For the study, 10 subjects with natural dentition and 18 upper and lower complete denture wearers selected and the Bio-electric Processor EM2(Myo-tronics Reaserch, Inc., U.S.A.) with the surface electrodes was used to record electromyographic activity from the right and left middle of masseter and anterior temporal muscles of each subject during mandibular postural rest position, tapping of teeth from postural rest position, maximal clench, and right and left gum and raw carrow chewing. This results of this study were as follows : 1. In mandibular postural rest position, the denture wearers produces high muscular activity in contrast to natural objects(P<0.05) but, there was no difference between the state of denture removal and insertion, and the muscle activity of the anterior temporal muscle was high than the middle of masseter muscle in natural objects and denture wearers. 2. In tapping of teeth, there was no difference in muscle activity between natural objects and the state of denture removal of denture wearers. 3. In maximal clench, there was markedly lower denture wearers than natural objects in muscle activity, and the ratio of mean voltages was about 36 percentages. 4. In gum and raw carrow chewing, the activity was lower than natural object, the ratio was about 59 percentages. 5. In chewing, the mean voltages of the middle of masster muscle on the chewing side was highest, followed by the anterior temporal on the chewing side, the anterior temporal and masster muscles on the non-chewing side.

  • PDF

On Screen Display용 자막처리 ASIC 설계 (Design of Caption-processing ASIC for On Screen Display)

  • 정근영;우종식;박종인;박주성;박종석
    • 대한전자공학회논문지SD
    • /
    • 제37권5호
    • /
    • pp.66-76
    • /
    • 2000
  • 본 논문은 가요반주기의 OSD(On Screen Display)에 필요한 영상· 자막처리 ASIC의 설계에 관한 내용을 기술한다. 기존의 자막처리는 범용 DSP를 이용하여 소프트웨어적으로 처리되었으나, 본 논문에서는 하드웨어 비용을 절감할 수 있는 ASIC을 설계하였다. 설계된 자막처리 ASIC의 주요기능은 외부로부터 명령코드와 함께 영상 및 자막 데이터를 받아 여러 영상효과를 가하여 화면으로 출력하는 것이다. 전체적인 설계는 Compass tool에서 schematic으로 설계되었고 부분적으로 VHDL로 코딩하였다. 설계된 ASIC은 로직 시뮬레이션을 통하여 일차적으로 검증한 후, FPGA를 이용하여 실제 시스템에 응용하여 최종 점검을 하였다. 칩은 0.8㎛ CMOS 공정을 활용하여 제작하였으며, 제작된 칩은 가요 반주기에서 원하는 기능을 수행하는 것을 확인하였다.

  • PDF

그루브의 Trap 효과에 대한 CFD 해석: 제 1부 − 그루브 단면 형상의 변화 (CFD Analysis of Trap Effect of Groove in Lubricating Systems: Part I - Variation in Cross-Sectional Shape of Groove)

  • 홍성호
    • Tribology and Lubricants
    • /
    • 제32권3호
    • /
    • pp.101-105
    • /
    • 2016
  • Trap effect of groove is evaluated in a lubricating system using computational fluid dynamics (CFD) analysis. The simulation is based on the standard k-ε turbulence model and the discrete phase model (DPM) using a commercial CFD code FLUENT. The simulation results are also capable of showing the particle trajectories in flow field. Computational domain is meshed using the GAMBIT pre-processor. The various grooves are applied in order to improve lubrication characteristics such as reduction of friction loss, increase in load carrying capacity, and trapping of the wear particles. Trap effect of groove is investigated with variations in cross-sectional shape and Reynolds number in this research. Various cross-sectional shapes of groove (rectangular, triangle, U shaped, trapezoid, elliptical shapes) are considered to evaluate the trap effect in simplified two-dimensional sliding bearing. The particles are assumed to steel, and defined a single particle injection condition in various positions. The “reflect” boundary condition for discrete phase is applied to the wall boundary, and the “escape” boundary condition to “pressure inlet” and “pressure outlet” conditions. The streamlines are compared with particles trajectories in the groove. From the results of numerical analysis in the study, it is found that the cross-sectional shapes favorable to the creation of vortex and small eddy current are effective in terms of particle trapping effect. Moreover, it is found that the Reynolds number has a strong influence on the pattern of vortex or small eddy current in the groove, and that the pattern of the vortex or small eddy current affects the trap effect of the groove.

통합형 메디컬센서노드와 모바일 환자생체정보 관리 시스템 설계 (Design of Integrated medical sensor node and Mobile Vital Healthcare diagnosis System)

  • 이승철;권태하;정완영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.302-305
    • /
    • 2009
  • 본 논문에서는 환자나 만성질환자가 공간적으로 구속을 받지 않고 자유롭게 이동이 가능한 상태에서 건강상태 모니터링이 가능한 셀룰러폰(Cellular telephone)에 기반한 통합형 생체신호 계측 및 생체정보 관리가 가능한 생체 관리 시스템을 설계하고자 하였다. 메디컬센서 인터페이스를 센서노드에 부착할 경우 개별적인 센서노드가 필요하기 때문에 생체 디바이스의 문제점을 해결하기 위해서 통합형 메디컬 센서노드 어플리케이션을 설계하였다. 셀룰러폰으로 ECG(Electrocardiogram), 혈압(Blood pressure), 혈당(Blood sugar)과 같은 생체신호를 모니터링해서 비정상적인 생체신호를 판별하며, 당일 측정한 생체신호를 셀룰러폰에 저장해 과거에 측정한 메디컬 기록들과 함께 차트로 리뷰 가능하다. 본 논문에서는 기존의 실시간 생체 모니터링 비해, 개발된 셀룰러폰 기반의 헬스케어용 관리시스템은 고/저혈압, 당료를 갖고 있는 만성질환자가 상시적으로 질병을 관리할 수 있으며, 또한 CDMA의 특성상 넓은 환경에서도 전송이 가능하무로서 무선센서네트워크를 이용하기 위해 CDMA 방식과 통합하였다.

  • PDF

개인정보 유출 시 통지.신고 프레임워크 및 가이드라인 (A Framework and Guidelines for Personal Data Breach Notification Act)

  • 이충훈;고유미;김범수
    • 정보보호학회논문지
    • /
    • 제21권5호
    • /
    • pp.169-179
    • /
    • 2011
  • 2011년 9월 시행되는 개인정보 보호법에 따르면, 개인정보처리자는 개인정보 유출에 대한 추가적인 법적 책임을 져야 한다. 특히 개인정보 유출 시, 개인정보처리자는 정보 주체에게 개인 정보가 유출된 사실을 의무적으로 통지를 하여야 한다. 본 연구에서는 미국 46개주에서 실시하고 있는 현행 유출 통지법과 기타 국가의 주요 사례를 분석하여, 유출 통지 프레임워크를 제시한다. 개인정보 유출통지 프레임워크는 (1) '통지의 대상이 되는 개인정보', (2) '통지 주체', (3) '통지 시점', (4) '통지 내용', (5) '통지 방법' 등 다섯 가지 중요 요소로 구성된다. 그리고 새로운 유출 통지 프레임워크에 기초하여, 향후 적절한 가이드라인을 수립하기 위한 방향을 제안한다.