• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.660-670
• /
• 2009

Neighboring construction becomes mainstream of Ground excavation in downtown area. This causes the displacement, deformation, stress condition, etc of the ground surroundings. Therefore Neighboring construction have an effect on Neighboring structure. All these years a lot of Neighboring construction carried out, and the accumulation of technology also get accomplished. But earth retaining structure collapse happens yet. Types of earth retaining structure collapse are 12. 1. Failure of anchor or strut system, 2. Insufficiency of penetration, 3. H-pile Failure on excessive bending moment, 4. Slope sliding failure, 5. Excessive settlement of the back, 6. Deflection of H-pile, 7. Joint failure of coupled H-pile, 8. Rock failure when H-pile penetration is rock mass, 9. Plane arrangement of support systems are mechanically weak, 10. Boiling, 11. Heaving, 12. Over excavation. But field collapses are difficult for classification according to the type, because collapse process are complex with various types. When we consider the 12 collapse field, insufficient recognition of ground condition is 4 case. Thorough construction management prevents from fault construction. For limitations of soil survey, It is difficult to estimate ground condition exactly. Therefore, it should estimate the safety of earth retaining system, plan for necessary reinforcement, according to measurement and observation continuously.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.167-173
• /
• 1999

본 논문에서는 전면부 변형형태에 따른 보강토옹벽의 파괴거동을 탄소봉 모형 실험장치를 이용하여 실험적으로 연구하였다. 실험에서는 모형 보강토 벽체의 전면판 변형 형태를 상부변형, 수평변형, 하부변형 등 3종류로 나누어 실시하였다. 변형된 벽체의 파괴선을 육안으로 확인하기 위하여 사진촬영 기법을 이용하였다. 실험결과 상부변형의 조건일 경우 파괴선은 포물선의 형태를,수평이동의 조건일 경우 파괴선은 매우 큰 원호의 형태를 보였으며, 하부변형의 조건일 경우 파괴선은 직선화된 대수나선형태를 보였다. 현재 설계에 많이 사용되고 있는 복합중력식 설계법의 가상파괴선은 하부변형 조건의 파괴선과 가장 유사한 형태를 보였다.

• International Journal of Reliability and Applications
• /
• 제15권1호
• /
• pp.51-64
• /
• 2014

This paper develops a warranty cost model for complex systems with imperfect repair within a warranty period by addressing a practical case that the first inter-failure interval is longer than any other inter-failure intervals. The product is in its best condition before the first failure if repair is imperfect. After the imperfect repair, other inter-failure intervals which are explained by renewal processes, are stochastically smaller than the first inter-failure interval. Based on this idea, we suggest the failure-interval-failure-criterion model. In this model, we consider two random variables, X and Y where X represents failure intervals and Y represents failure criterion. We also obtain the distribution of the number of failures and conduct the warranty cost analysis. We investigate different types of warranty cost models, reliabilities and other measures for various systems including series-parallel configurations. Several numerical examples are discussed to demonstrate the applicability of the methodologies derived in the paper.

• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.393-403
• /
• 2003

In this paper, various replacement policies for the general failure model are considered. There are two types of failure in the general failure model. One is Type I failure (minor failure) which can be removed by a minimal repair and the other is Type II failure (catastrophic failure) which can be removed only by a complete repair. In this model, when the unit fails at its age t, Type I failure occurs with probability 1-p(t) and Type II failure occurs with probability p(t), $0{\leq}p(t){\leq}1$. Under the model, optimal replacement policies for the long-run average cost rate and the limiting efficiency are considered. Also taking the cost and the efficiency into consideration at the same time, the properties of the optimal policies under the Cost-Priority-Criterion and the Efficiency-Priority-Criterion are obtained.

• 품질경영학회지
• /
• 제31권3호
• /
• pp.185-192
• /
• 2003

In this paper, the properties on the optimal replacement policies for the general failure model are developed. In the general failure model, two types of system failures may occur : one is Type I failure (minor failure) which can be removed by a minimal repair and the other, Type II failure (catastrophic failure) which can be removed only by complete repair. It is assumed that, when the unit fails, Type I failure occurs with probability 1-p and Type II failure occurs with probability p, $0\leqp\leq1$. Under the model, the system is minimally repaired for each Type I failure, and it is repaired completely at the time of the Type II failure or at its age T, whichever occurs first. We further assume that the repair times are non-negligible. It is assumed that the minimal repair times in a renewal cycle consist of a strictly increasing geometric process. Under this model, we study the properties on the optimal replacement policy minimizing the long-run average cost per unit time.

• Composites Research
• /
• 제20권6호
• /
• pp.8-14
• /
• 2007

스킨-보강재 시편 시험을 통해 스킨과 보강재의 분리 파손 특성을 살펴보고 접합방법, 보강재 단면 및 이차 접합 파라미터의 영향을 조사하였다. 본 시험 결과와 이전 시험[1]의 결과를 종합해 볼 때, 보강패널의 스킨-보강재 분리 파손 강도를 판단하는 기준으로 스킨-보강재 시편의 파손 변위를 이용하는 것이 타당하며 동일한 접합 방법을 사용할 경우, closed형 보다 open형 보강재를 사용하는 것이 복합재 보강 패널에서 스킨과 보강재의 분리파손을 방지하는데 유리함을 알 수 있었다. 접합방법으로는 이차접합 및 접착제를 사용한 동시성형이 좋은 파손 강도를 보였으며 접착제 없는 동시성형이 가장 나쁜 파손 강도를 나타내었다. 파손 모드는 이차접합 시편은 주로 계면 파손이 발생하였으며 동시성형 시편은 복합재료의 층간분리 파손이 발생하였다. 이차 접합 시편에서는 접착제 두께가 작을수록 높은 파손 강도를 보였다. Fillet은 시편의 강도에 영향을 미치지 않았다. 표면 조도의 영향은 open형 및 closed형 시편이 다르게 나타났다.

• Journal of Chest Surgery
• /
• 제14권4호
• /
• pp.319-323
• /
• 1981

To clarify the clinical spectrum of non-oliguric acute renal failure, we undertook a retrospective study of 16 cases of acute renal failure following trauma and surgery, 6 of whom were non-oliguric throughout their periods of azotemia. With the clinical symptoms, BUN, creatinine and some urinary diagnostic indexes, we analyzed the differences between non-oliguric and oliguric renal failure. And the results were: 1. The nonoliguric form [10 cases] was more common than oliguric [6 cases], especially post-traumatic failure. 2. The both types belonged to parenchymal renal failure by the U/P UN ratio and urinary Na concentration [Vertal, 1967]. 3. The non-oliguric form was lesser severe in urinary diagnostic indexes and clinically. The non-oliguric renal failure has better clinical course and prognosis, the failure to diagnose it is as dangerous as the failure oliguric renal failure.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.184-189
• /
• 2009

In 2008 the total estimated failure costs in the Netherlands was estimated to be 11.4% of the industry's turnover compared to 7.7% seven years earlier. Failure costs can be the consequence of rework as a result of failure to conform to the product requirements and specifications or due to inefficient processes and bad management practices. Many construction companies however are unaware of the exact nature of these costs, their root causes or how to control them. This paper describes work carried out in the Netherlands to identify the different types of failure costs in construction and their root causes. The research described builds on previous findings by another research institution and expands it to include information collected from project cases and a survey of a number of project managers in the construction industry. The paper describes the analysis of the results from cases and the survey to identify the root causes of failure costs. Research shows, for example, that many failure costs are related to the client taking late decisions and making changes to the project requirements.

• 보건행정학회지
• /
• 제26권4호
• /
• pp.343-351
• /
• 2016

Background: This study aims to analyze the effects of insurance types on the medical service uses for heart failure inpatients using propensity score matching (PSM). Methods: 2014 National inpatient sample based on health insurance claims data was used in the analysis. PSM was applied to control factors influencing the service uses except insurance types. Negative binomial regression was used after PSM to analyze factors that had influences on the service uses among inpatients. Subjects were divided by health insurance type, national health insurance (NHI) and medical aid (MA). Total charges and length of stay were used to represent the medical service uses. Covariance variables in PSM consist of sociodemographic characteristics (gender, age, Elixhauser comorbidity index) and hospital characteristics (hospital types, number of beds, location, number of doctors per 50 beds). These variables were also used as independent variables in negative binomial regression. Results: After the PSM, length of stay showed statistically significant difference on medical uses between insurance types. Negative binomial regression provided that insurance types, Elixhauser comorbidity index, and number of doctors per 50 beds were significant on the length of stay. Conclusion: This study provided that the service uses, especially length of stay, were differed by insurance types. Health policy makers will be required to prepare interventions to narrow the gap of the service uses between NHI and MA.

• International Journal of Reliability and Applications
• /
• 제10권1호
• /
• pp.43-57
• /
• 2009

In this article, we study the reliability equivalence factor of a series system. The failure rates of the system components are functions of time t. we study two cases of non-constat failure rates (i) weibull distribution (ii) linear increasing failure rate distribution. There are two methods are used to improve the given system. Two types of reliability equivalence factors are discussed. Numerical examples are presented to interpret how one can utilize the obtained results.