• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.4
• /
• pp.234-241
• /
• 2000

The Saccharomyces cerevisiae PMR1 gene encodes a Ca2+-ATPase localized in the Golgi. We have investigated the effects of PMR1 disruption in S. cerevisiae on the glycosylation and secretion of three heterologous glycoproteins, human ${\alpha}$1-antitrypsin (${\alpha}$1-AT), human antithrombin III (ATHIII), and Aspergillus niger glucose oxidase (GOD). The pmr1 null mutant strain secreted larger amounts of ATHIII and GOD proteins per a unit cell mass than the wild type strain. Despite a lower growth rate of the pmr1 mutant, two-fold higher level of human ATHIII was detected in the culture supernatant from the pmr1 mutant compared to that of the wild-type strain. The pmr1 mutant strain secreted ${\alpha}$1-AT and the GOD proteins mostly as core-glycosylated forms, in contrast to the hyperglycosylated proteins secreted in the wild-type strain. Furthermore, the core-glycosylated forms secreted in the pmr1 mutant migrated slightly faster on SDS-PAGE than those secreted in the mnn9 deletion mutant and the wild type strains. Analysis of the recombinant GOD with anti-${\alpha}$1,3-mannose antibody revealed that GOD secreted in the pmr1 mutant did not have terminal ${\alpha}$1,3-linked mannose unlike those secreted in the mnn9 mutant and the wild type strains. The present results indicate that the pmr1 mutant, with the super-secretion phenotype, is useful as a host system to produce recombinant glycoproteins lacking high-mannose outer chains.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.215-223
• /
• 2010

Purpose: The present study was aimed to evaluate the level of cortical bone strain during the placement of an implant. The primary concern was to investigate if the extent of overloading area near the marginal bone could be affected by microthread fabricated at the cervical 1/3 of an implant. Materials and methods: Three dimensional finite element analysis was used to simulate the insertion of 3 implants. Control model was $4.1{\times}10$ mm implant (Submerged model, Dentis Co,, Daegu, Korea) equipped with a main thread only. Type I was with main thread and microthread, and Type II had similar thread pattern but was of tapered body. A PC-based finite element software (DEFORM 3D ver 5, SFTC, Columbus, OH, USA) was used to calculate a total of 3,600 steps of analysis, which simulated the whole insertion. Results: Results showed that the strain field in the marginal bone within 1 mm of the implant wall was higher than 4,000 micro-strain in the control model. The size of bone overloading was 1-1.5 mm in Type I, and greater than 2 mm in Type II implants. Conclusion: These results indicate that the marginal bone may be at the risk of resorption on receiving the implant for all 3 implant models studied. Yet, the risk was greater for Type I and Type II implants, which had microthread at the cervical 1/3.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.17-33
• /
• 1990

The purpose of this study was to evaluate the fracture toughness of dental composite resins and to investigate the filler factor affecting the fracture behaviour on which the degree of fracture toughness depends. Six kinds of commercially available composite resin;, including two of each macrofilled, microfilled, and hybrid type were used for this study, The plane strain fracture toughness ($K_{10}$) was determined by three-point bending test using the single edge notch specimen according to the ASTM-E399. The specimens were fabricated with visible light curing or self curing of each composite resin previously inserted into a metal mold, and three-point bending test was conducted with cross-head speed of 0.1mm/min following a day's storage of the specimens in $37^{\circ}C$ distilled water. The filler volume fractions were determined by the standard ashing test according to the ISO-4049. Acoustic Emission(AE), a nondestructive testing method detecting the elastic wave released from the localized sources In material under a certain stress, was detected during three-point bending test and its analyzed data was compared with, canning electron fractographs of each specimen. The results were as follows : 1. The filler content of composite resin material was found to be highest in the hybrid type followed by the macrofilled type, and the microfilled type. 2. It was found that the value of plane strain fracture toughness of composite resin material was in the range from 0.69 MPa$\sqrt{m}$ to 1 46 MPa$\sqrt{m}$ and highest In the macrofilled type followed by the hybrid type, and the microfilled type. 3. The consequence of Acoustic Emission analysis revealed that the plane strain fracture toughness increased according as the count of Acoustic Emission events increased. 4. The higher the plane strain fracture toughness became, the higher degree of surface roughness and irregularity the fractographs demonstrated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.53-63
• /
• 2016

Wheel dynamometers are used to measure dynamic load that is conveyed from the road to a vehicle while driving. In this paper, two types of six-component wheel dynamometers utilizing shear deformation and bending deformation were designed and evaluated. Prior to designing the shear and bending type wheel dynamometers, the shear and bending deformation behaviors of the basic structure of the wheel dynamometer itself were analyzed using finite element analysis. Strain analysis was performed repeatedly in order to obtain a similar output sensing strain for each load component. The design was modified with a bridge circuit in order to minimize coupling strain. The results indicated that the shear type dynamometer was expected to obtain stable characteristics due to uniform strain distribution while the bending type dynamometer was expected to obtain high-quality sensitivity performance due to consistent output sensitivity.

• Research in Plant Disease
• /
• v.10 no.1
• /
• pp.63-68
• /
• 2004

Twenty-three strains of Serratia sp., isolated from surface-sterilized rice roots collected in Chonbuk and Chungnam province, were identified and characterized. They were Gram-negative, rod shaped and red pigmented typically and their endophytism was confirmed by inoculation and reisolation of the strains in planta. Their antifungal activity against 4 rice pathogenic fungi was compared and ranged from 62.4 to 85.2％ against Rhizoctonia solani and 68.0 to 88.5％ against Pyricularia grisea. Among the 23 strains tested, strain Rsm220 showed the strongest inhibition activity against 4 pathogenic fungi. The strain was, therefore, selected as a biocontrol candidate for both the pathogens and its bacteriological characteristics and 165 rDNA sequences were analyzed. Phenotypic and biochemical characteristics of the selected Rsm220 were highly related to the type strain of S. marcescens and 165 rDNA sequencing of Rsm220 showed a homology of 98.2％ to the type strain of S. marcescens. The strain Rsm220 was identified as S. marcescens and the inhibition result of this endophytic strain indicates that it is a potential biocontrol agent for R. solani and R grisea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.771-778
• /
• 2002

Cooling clothes especially cooling vest are being considered for as an efficient way to reduce heat strain under hot environment. But wearing ice gel or ice-based cooling vest caused discomfort to subjects due to the weight of vest. Therefore, this study was executed to find efficient cooling parts and to reduce vest weight by cooling only these parts. Two male subjects were exposed to heat(40$^{\circ}C$, 30%RH) with A type(breast+back+abdomen+waist), B type(breast+back+waist), C type(breast+back+abdomen) and D type(breast+back) cooling vest that distinguished with cooling part. The results were as follows; When subjects were C type and D type vest, sweat volume was less and skin temperature was low. Heart rate and rectal temperature were low in B type and D type. These results suggest that excessive cooling of breast and abdomen may exert a bad influence to health and cooling of back is desirable.

• Microbiology and Biotechnology Letters
• /
• v.27 no.5
• /
• pp.359-363
• /
• 1999

To prevent appearance of resistant mosquitoes against $\delta$-endotoxin of bacillus thuringiensis subsp. israelensis (Bti) in field, a mosquitocidal Bacillus thuringiensis strain 21-2(Bt21-2) producing a new type of $\delta$-endotoxin was isolated. The strain Bt 21-2 belongs to H serotype 43, B. thuringiensis subsp. guiyangiensis (Btg). The $\delta$-endotoxins from the strain Bt 21-2 and the strain Bti were a cuboid shape morphologically, but the $\delta$-endotoxin of the strain Bt 21-2 was composed of 150, 90 and 70kDa proteins on SDS-PAGE, and the antigenicity of $\delta$-endotoxin of the strain Bt 21-2 was different from that of the strain Bti on immunoblot. The $\delta$-endotoxin gene of the strain Bt 21-2 was not amplified with specific primers of $\delta$-endotoxin gene (cry4A and cry4B) of the strain Bti on PCR.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.195-198
• /
• 2000

Production of eight avermectin components was improved in Streptomyces avermitilis wild type strain (ATCC31267) and high producing mutant strain (ATCC31780) when transformed with a foreign regulatory gene, afsR2 of Streptomyces lividans. Wild type and the high producing strain of S. avermitilis transformed with multiple copies of afsR2 improved total avermectin productions by 2.3 fold and 1.5 fold, respectively. In both of wild type and the high producing transformants carrying afsR2, glycerol was proved to be the best carbon source for the stimulation of avermectin production.

• Microbiology and Biotechnology Letters
• /
• v.25 no.4
• /
• pp.367-373
• /
• 1997

One of the three components of the phenanthrene dioxygenase which is required for conversion of phenanthrene to cis-phenanthrene dihydrodiol, Rieske-type ferredoxin encoded by phnR has been cloned and sequenced from Pseudomonas sp. strain DJ77. The gene phnR is positioned at the downstream of phnQ encoding 2,3-dihydroxybiphenyl 1,2-dioxygenase. The PhnR ferredoxin contains 108 amino acids with a Mr of 11,355. The deduced amino acid sequence of the PhnR ferredoxin is 35-79% identical to those of homologous ferredoxins encoded by various genes.

• Korean Journal of Microbiology
• /
• v.29 no.3
• /
• pp.184-188
• /
• 1991

Three strains of Clostridium thermocellum, JH01, JH20 and JH30 which are capable of producing ethanol directly from cellulose were isolated from composts. The morphological, cultural and physiological properties of the strains were similar to the ATCC type strain, except for carbon source utilization and degree of ethanol tolerance. All of the three isolates could use glucose and maltose as a sole carbon source and two of them, strains of JH01 and JH20 were three times more tolerant to ethanol than the ATCC type strain. Cellulases secreted by the isolated strains had higher activities than those of the ATCC type strain.