• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.150-159
• /
• 2009

일반적으로 드럼 세탁기의 구동 효율은 주로 세탁 시간에 영향을 받는다. 이러한 세탁 시간은 세탁물의 양과 종류에 따라 결정된다. 비록 세탁물의 종류는 사용자에 의해 쉽게 입력이 가능하지만 세탁물의 양은 사용자가 입력하기 힘들다. 이 때문에 세탁물의 양을 추정하는 구간이 존재하며 추정된 세탁물의 양에 따라 세탁 행정의 시간이 결정된다. 따라서 본 논문은 정확한 세탁물의 양을 측정하기 위해 관성 추정기를 사용한 부하 추정 알고리즘을 제안한다. 제안된 알고리즘은 실제 세탁기에 적용이 가능하도록 저가형 위치 센서를 사용하는 PMSM 구동회로를 통해 실험하였다. 그리고 실제 세탁 부하 조건과 일치하도록 드럼 세탁기에 세탁물을 인가하여 부하추정을 실험하였다.

• 소음진동
• /
• 제7권2호
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• 동력기계공학회지
• /
• 제18권3호
• /
• pp.20-28
• /
• 2014

Most washing machines are now produced as a drum-type, where a washing drum mounted on a suspension system with springs and dampers, to minimize the transmittance of the vibration from the drum to the cabinet. The purpose of this paper is to develop optimized suspension system of the drum washing machine which minimizes transmission of disturbing vibration and force. In this paper, a method for optimizing suspension system of the drum washing machine is presented using ADAMS. The design variables to optimize are extracted using Sequential Quadratic Programming(SQP) in ADAMS. To evaluate optimized spring constants and damping coefficients of the drum washing machine, simulation was done to compare the vibration attenuation performances before and after the optimization. The results of simulation show that the optimized suspension system has better performance than before the optimization.

• 복식문화연구
• /
• 제23권6호
• /
• pp.1082-1096
• /
• 2015

The purpose of this study was to examine laundry behavior according to the number of households and the type of washing machine that each household used. The data was obtained from questionnaires filled out by 417 households, which included college students living in Seoul and Gyeonggi province. The results of this study are as follows: first, according to the results of survey about the number of household members and type of washing machine that household had, one or two-person households accounted for 24.0%. Regarding the type of washing machine that each household used, there were more drum washers. In households comprised of three or more persons, a higher percentage had a machine with a pulsator. Second, with regard to the method of classifying the wash in doing the laundry, all families classified the wash according to color and textile material. Third, with regard to the amount of detergent in doing the laundry, 63.5% of households used the recommended amount of detergent while 28.3% of households used more detergent than the recommended amount. Fourth, with regard to the set temperature of water in doing the laundry, 36.2% of households used cold water; this was the highest percentage. Fifth, with regard to input sequence in doing the laundry, most households put the wash in the machine in advance, and then filled the washer with water; 56.1% of households added a rinsing process for all washing processes.

• 한국의류학회지
• /
• 제32권6호
• /
• pp.947-958
• /
• 2008

은나노를 이용한 드럼식 세탁기로 세탁한 경우 발생되는 세탁물의 변퇴색 및 오염현상을 관찰하기 위해 이와 유사한 세탁원리를 갖는 론더로메타를 이용하여 그 결과를 알아보았다. 반응성염료로 염색한 면직물과 분산염료로 염색한 폴리에스터 직물을 세탁포로 하고, 첨부 백포로 면, 폴리에스테르, 나일론을 이용하여, 세탁온도, 세탁액비, 세제 농도, 세탁용수를 변화시켜 세탁물의 염색견뢰도를 관찰하였고, 은물로 세탁한 경우 세탁물로의 은침착 여부를 관찰하였다. 그 결과, 세탁조건에 따른 염색포의 변색은 크지 않았으나, 세탁온도가 높고, 세탁 액비가 낮은 조건에서 첨부 백포로의 오염이 크게 나타났고, 특히 나일론 첨부 백포로의 오염이 컸다. 세제농도와 세탁용수는 염색견뢰도에 큰 영향을 미치지 않았다. 세탁용수를 달리하여 세제없이 백포만 반복 세탁한 경우, 은물로 세탁한 면, 나일론은 수돗물로 세탁한 경우보다 백도가 약간 낮게 나타났으며, 정량분석 결과 세탁물에 은화합물이 침착되었음이 확인되었다.

• 한국정밀공학회지
• /
• 제33권9호
• /
• pp.731-737
• /
• 2016

In the quest for improved capacity and accelerated dehydration speed of drum type washing machines, an increase in vibration emerges as a major challenge. In an attempt to derive a new design with reduced vibration, a full finite element model of washing machine has been developed, with experimental verification. After modal analyses of several design variants, a new design of the cabinet has been proposed. Forced vibration analysis of the new model suggests that 19% reduction in cabinet vibration amplitude can be achieved with this design.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.69-79
• /
• 2006

The washing characteristics of steam jet heating process have been compared with other washing processes, such as low temperature process(standard process, below $40^{\circ}C$) and high temperature process(boiling process, up to $95^{\circ}C$) with the standard soil fabric, EPMA 105. Steam jet heating process showed almost the same washing efficiency as high maximum temperature process for pig's blood and wine. This result can be explained with the higher surface temperature of washing materials in steam jet process compared with direct boiling process. In terms of the energy and water consumption, the steam jet washing process showed significant savings compared with direct boiling type washing process.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.328-331
• /
• 2008

This study presents on the analysis fire hazards of drum type electric washing machine. In order to analyze fire hazards fire experiment is conducted. The fire experiment is conducted to simulate under the normal condition and abnormal condition. The experiment under the abnormal condition is simulated in safety device failure, situation of accumulated dust and tracking phenomenon caused by humidity. The results show that fire hazard is high at the abnormal condition. In this paper, we suggest to use the safety device of low operating temperature in electric washing machine for reducing fire hazard.

• 한국동물위생학회지
• /
• 제44권1호
• /
• pp.51-59
• /
• 2021

Various infectious diseases have threatened swine industries in Korea. One of the major risk factors of disease spread is livestock transport vehicle. For this reason, all abattoirs are required by law to have vehicle washing and disinfection facilities. However, detailed guidelines for cleaning and disinfection procedures were not provided. So in this study, assessment by visual observation was conducted to evaluate how well the cleaning and disinfection procedures of livestock transport vehicles have been performed in four different abattoirs in Jeonbuk, Korea. The observation included length of car washing time, the number of washing bay, type of washperson, type of disinfectant application, length of disinfection time, and compliance of driver's hygienic procedure. Every vehicle in all abattoirs conducted washing and disinfection procedure. However, there were procedural differences for each abattoirs and defects in the washing and disinfection procedures. In addition to that, the compliance of driver's hygienic procedure was not sufficient. Hence, detailed manuals on washing and disinfection procedures for involved people are required and it is necessary to establish an inspection and evaluation system.

• 소음진동
• /
• 제8권4호
• /
• pp.670-682
• /
• 1998

Ball type automatic balancer is used to reduce the vibration caused by unbalance of rotor. In this study, A analytic modeling of a front loaded washing machine with ball type automatic balancer has been suggested theoretically and ADAMS has been used to analyze the dynamic characteristics of automatic balancer. It is found from simulation and experimental results that the automatic balancer suppress the steady state vibration of washing machine effectively. The test results match with the simulation results of ADAMS, thereby the dynamic model of ADAMS can be used as virtual prototype to predict the vibration characteristics which could be changed by the modification of design variableand can reduce the design cycle sharphy. To maximize the balancing effect of automatic balancer, the friction between balls and race and the deviation between geometric center and rotation center of drum need to be minimized and the optimum design for the stiffness of flange shaft and the angular acceleration of drum should be achieved.